Tacoma Solar Panels - High Efficiency Polysilicon Component70w CNBM China
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 watt
- Supply Capability:
- 99999999 watt/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Description:
Polycrystalline silicon photovoltaic products
There are nearly 20 kinds of current polysilicon component blue sky sunproduction, power ranging from 45W to 300W, details please refer toannex "polysilicon component parameter table".
The products have obtained CE certification, CQC certification, TUV certification.
Model Type | Good Quality 185W Solar Panel |
Peak Power-Pmax(W) | 185W |
Open Circuit Voltage-Voc(V) | 44.2 |
Maximum Power Voltage-Vmp(V) | 36 |
Short Circuit Current-Isc(A) | 5.4 |
Maximum Power Current-Imp(A) | 5 |
Maximum System Voltage | 1000V DC |
Maximum Series Fuse Rating | 10A |
Power Tolerance | -1~+3% |
Temperature Coefficients of Pmax | -0.45%/℃ |
Temperature Coefficients of Voc | -0.348%/℃ |
Temperature Coefficients of Isc | 0.031%/℃ |
Nominal Operating Cell Temperature | 44.5±2℃ |
Standard Testing Condition(STC) | Irradiance:1000W/m²;Temperature:25℃;AM=1.5 |
Qualification Test Parameters | |
Operating Temperature | -40℃~+85℃ |
Storage Temperature | -40℃~+85℃ |
Pressure Bearing | ≥5400Pascal/m² |
Wind Bearing | ≥5400Pascal/m² |
Mechanical Characteristics | |
Cell Size | Mono 125*125mm±0.5 |
No.of Cells | 72pcs(6*12) |
Dimension | 1580*808*40mm |
Weight | 15.5Kg |
Glass | 3.2mm High Transmission,Low Iron |
Frame | Anodized Aluminum Alloy |
Junction Box | IP65Rated |
Internal Diodes | 3 Bypass Diodes |
Cable | 1*4.0mm² Length 900mm |
FAQ:What' your products warranty?
Products Guarantee 12 yrs free from defects in materials and workmanship Performance Guarantee No less than 90% within 10yrs and no less than 80% within 25yrs
- Q: What are the advantages of using solar panels?
- There are several advantages of using solar panels. Firstly, solar panels harness energy from the sun, which is a renewable source of power, making it environmentally friendly. They produce clean energy, reducing greenhouse gas emissions and contributing to a more sustainable future. Solar panels also provide independence from the grid, allowing homeowners to generate their own electricity and potentially save on energy bills. Additionally, solar panels require minimal maintenance, have a long lifespan, and can increase the value of a property.
- Q: can u use a light bulb instead of the sun to power a solar panel
- Yes light-bulbs work, sort of, but you have to illuminate every cell. The output is regulated by the cell with the weakest illumination. Additionally the sun is very strong, 000W of light or more per square meter. A light-bulb is weaker, so less output. A 00W bulb may have only 5W of light, and it doesn't cover the panel, so you can expect something like % of the sun's output. The spectrum of a light-bulb is actually more appropriate for a silicon solar panel, as the silicon panel responds best to red colours.
- Q: Does a solar panel work under a full moon a tiny bit, or not at all? Likewise, if you used mirrors or lenses the concentrate sunlight, is there a maximum to how much a solar panel can handle?
- I believe solar panels gather enough energy from the sun in the daytime.I don't own one therefore I AM not a 00% sure unless it runs on batteries,generator or alternator.Who knows it just may plug up at night.
- Q: I would like to know how do you build a solar panel?
- There are several types of solar panels. If you mean photovoltaic panels for generating electricity, that is a really advanced project that few amateurs are equipped to do. In the long run, it will be a lot cheaper and easier to buy factory made PV panels. You can try building one by sandwiching an array of photovoltaic cells between a sheet of glass or plexiglass and a sheet of aluminum. Remember that this assembly must be able to withstand great heat, and it must be sealed to make absolutely sure it does not leak. So basically, you need to lay out the PV cells and wire them together to get the desired voltage and current, with some arrangement to allow the wires to extend outside without leaking. Then you enclose the panel around all four edges with aluminum channel and seal with silicone sealer. Lay it on thick and test thoroughly with water hoses to eliminate all leaks. As mentioned, it's easier and cheaper to buy them factory made. If you mean a heat collector for a solar house heating system or hot water system, that is just a matter of building a thin, flat aluminum box with a glass lid. For hot air, you just need to circulate the air through the box when the sun is shining. For water, you need to have some arrangement to pass the water through the compartment in thin walled metal tubing. You won't be surprised when I say it's cheaper to buy one factory made. Good luck.
- Q: There are places in the US where it is sunny almost all the time, like the southwest. But if we covered an area of the Sahara with solar panels, the sun exposure with the area would generate enough energy for the whole US at least. Plus, I would imagine it would be a great source of income for those countries.Why isn't this a topic under discussion or even mentioned between countries' governments/in Congress/in politicians' viewpoints?
- It's expensive - solar power isn't competitive with power from the grid in most countries and it's a very expensive in terms of capital - you have to put most of the money up front. Meanwhile fossil fuel plants are cheaper to build and from then on you only spend money on fuel when you're selling power (and of course you don't have to pay for the damage you cause society with air pollution and greenhouse gases).
- Q: I need a 2v (500-800ma) solar panel that in can fit on a 24inx4in flat surface. Where can i get one this size and with this power?
- Hey Jeff, what you're talking about is frequently referred to as a, solar battery maintainer. There are lots of places that make and sell them, I have seen them in many auto parts stores and truck stops along the freeways. Go to google and search for a solar battery maintainer, they come is sizes similar to what you are searching for, but it will be difficult to find one that is not over 4 wide. Lots of them are about the size of the top of a shoe box, maybe 2 X 6, and come with a cigarette lighter cord attached. A 2 volt model at 500 ma, or /2 amp, works out to about 9 watts, assuming the 2 volt nominal voltage panel is actually optimized for 8 volts, as most of them are. These devices are designed to sit on the dash board of your car and keep your battery charged if you leave the car for a long period of time, like at the airport for a week in the winter. They actually work for that, we've used one before. What are you planning on doing with it? Charging a battery or running a device directly? Remember if you hook it straight to a device, and the current requirements of the device are less than the available sun will develope with your panel, the voltage may climb to a level too high for your device. If you're charging a battery, this does not cause a problem. Another option is to build your own. It can be a lot of work for just one panel, I've not done it myself, but there are videos on the subject. That device in real goods is a flexible panel, known in the solar world as, Amorphous. They are still a bit experimental, the ones they made a few years ago did not hold up as well as the solid ones, and they are expensive. You can get a /2 amp maintainer for around $25. Good luck Jeff, and take care, Rudydoo
- Q: How do solar panels affect my electricity bill?
- Solar panels can significantly reduce your electricity bill by generating clean and renewable energy from the sun. By harnessing solar power, you can generate your own electricity, thus reducing reliance on the grid and lowering your monthly utility costs. In some cases, solar panels can even result in net metering, allowing you to receive credits or payments for surplus energy that you feed back into the grid.
- Q: I'm thinking of getting a solar panel for my house to help cut back on power use (I live in New Mexico). What sort of appliances can I run on a watt solar panel? Is it worth it to get a single watt panel or is it more efficient to get a multi-watt panel?
- You can run a lot of things. If you set the system to charge batteries when you are not using anything, they will charge effectively. You can use the system for lighting, LED lighting direct from the battery power is most effient since LEDs are low voltage devices with a very long life span. I replaced a 2 tube flourescent trough with four 5Watt PowerLEDs for example, While I have it on 20VAC at the moment, I can move it to 2 VDC power with ease, and had set it up to run initially on 2 volt sources. There are also many 2 volt appliances as well. You can even convert some of those all in one stereo systems to operate on 2 volts by eliminating the power supply. You will actually use less power by doing so. You will not be able to blow the shingles off the roof unless you add a Class D amplifier to the output, but for most listening, the output is adequate. Some small TV's these days can be run from 2 volt sources, if not directly, then with a buckboost inverter for a laptop. The small TVs only draw about 30 to 45 Watts. Skip the idea of using an inverter, they are not efficient at small loads, and represent additional load on the system. So with a little bit of planning, you can run a lot from that 60 Watt system. You can at least take some bite out of the electric bill for mundane lighting. You can also use them to keep power up on a battery system for lighting in a remote barn. The uses are only limited by your imagination and creativity.
- Q: Is it possible for the everyday person to increase the efficiency of solar panels that they own? If so, how is it done?
- If you have a way to keep silicon panels cool, that really helps. On a hot summer day, our array was down 20% in production. I sprayed a hose to wash the panels, and for a few minutes, the power spiked to 20% ABOVE normal. The usual thing to do is mount the panels exposed to the wind if you can, or at least 8 off the roof otherwise. A few lucky souls with access to free stream water on their property have been known to use water cooling under their panels.
- Q: I don't want to spend a fortune, maybe talking like over $200 but I would like to power my computer, the monitor, my tv, and a small fridge.I looked up the price on some but it does not make any sense to me because it says that it has reached the price of less than $ per watt but if I look up a 20 watt solar panel it is $560 dollars. Why would it not be $20 because they said $ a watt.Where would be the best place to buy the cheapest solar panels?
- Today the lowest cost is more like $3 a watt. And you need to shop well to get it that cheap. The solar industry hopes to drive the cost down to $ a watt with the new thin film technology, but production volumes are still too low with that new technology for the market prices to come down. Their goal is to hit $ a watt within 5 years.
Send your message to us
Tacoma Solar Panels - High Efficiency Polysilicon Component70w CNBM China
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 watt
- Supply Capability:
- 99999999 watt/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
