Solar Water Heater Parts:Solar Collector with Copper Coil in Water Tank 2024 New Design
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Non-Pressure Solar Water Heater:
Non-pressure Solar Heater is one of the most economical solar water heating device with pretty high efficiency at the same time. It consists of hot water storage tank, solar vacuum tubes with mouth plug in storage tank, and bracket supporting tank and tubes.When cold water in evacuated tubes is heated with solar irradiation, as the specific gravities of hot water and cold water are different, hotter water goes upward to storage tank and colder water goes downward to glass tubes. through this continuous circulation, the cold water in storage tank will be gradually heated till sunset.
Specialty:
1. High thermal performance and working temperature: the heat exchanging rate even in winter can up above 55%.
2. Heat collecting efficiency is at least 20% above common solar systems.
3. Work in all day and all season: no matter any corner of the world, this system can work well even -40℃ to avoid the tube freezing problem.
4. Reliability: No water following through the tube, so water scale can not generate and tube cracks could be avoided, the system still can keep working even with some damaged tubes.
5. It can connect with water tap and work automatically with pressure0.6Mpa, bring enjoyable washing experience.
6. Safety: P/T valve would release pressure and temperature to protect tank..
Technical Specification:
1. Outer tank material: SUS304 stainless steel or powder coated color steel
2. Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
3. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
4. Frame material: 1.2mm thickness stainless steel
5. Insulation material: 55mm thickness polyurethane
6. Suitable for mains pressure water(up to 8 bar/116psi)
7. Easy plug-in installation
8. Install the T/P valve on the pressurized tank
9. Seal material: Stabilized High Temperature Silicon
Outer tank material: SUS304 stainless steel or powder coated color steel
Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
Frame material: 1.2mm thickness stainless steel
Insulation material: 55mm thickness polyurethane
Suitable for mains pressure water(up to 8 bar/116psi)
Easy plug-in installation
Install the T/P valve on the pressurized tank
Seal material: Stabilized High Temperature Silicon
19. Vacuum Tube | 20. Size (mm) | 21. Φ47*1500 / Φ58*1800 / Φ70*2100 | |||||
22. Tube (pcs) | 23. 10 / 12 / 15 / 18 / 20 / 22 / 24 / 30 / 36 / 42 | ||||||
24. Material | 25. Borosilicate 3.3 glass, magnetron spluttering selective coating | ||||||
26. Coating | 27. Single-target AL-N/AL or Three-target AL/N-Cu-SS | ||||||
28. Water Tank | 29. Capacity | 30. 80L ~ 500L for hot water storage tank | |||||
31. Inner tank | 32. Food-grade stainless steel SUS304-2B / SUS316 | ||||||
33. Insulation | 34. High-density polyurethane foam with 70~80 hour heat preservation | ||||||
35. Tank shell | 36. Food-grade stainless steel SUS304-2B | ||||||
37. Bracket | 38. Shaped strong aluminum alloy structure adaptable for flat or slope roof | ||||||
39. Accessories | 40. Anti-aging silicon seals, Dustproof seals, Air-vent cap, Stainless screws | ||||||
41. Auxiliary Devices | 42. Assistant tank, Intelligent controller, Electrical heater, Magnesium anodes | ||||||
43. Tilt Angle | 44. 25 ~ 50° | ||||||
45. Water Output | 46. 45 - 95°C | ||||||
47. Hail Resistance | 48. Φ25mm diameter | ||||||
49. Model Number | 50. Solar Vacuum Tube | 51. Tank 52. Liter | 53. System 54. Liter | 55. Container Loading Qty /sets | |||
56. Size /mm | 57. Qty /pcs | 58. 20GP | 59. 40GP | 60. 40HQ | |||
61. VNS-58SA12-100 | 62. Φ58*1800 | 63. 12 | 64. 100 | 65. 132 | 66. 58 | 67. 119 | 68. 140 |
69. VNS-58SA15-130 | 70. 15 | 71. 130 | 72. 170 | 73. 54 | 74. 108 | 75. 131 | |
76. VNS-58SA18-150 | 77. 18 | 78. 150 | 79. 198 | 80. 43 | 81. 86 | 82. 105 | |
83. VNS-58SA20-170 | 84. 20 | 85. 170 | 86. 223 | 87. 40 | 88. 80 | 89. 97 | |
VNS-58SA24-200 | 24 | 200 | 263 | 35 | 70 | 85 | |
VNS-58SA30-250 | 30 | 250 | 329 | 28 | 56 | 68 | |
VNS-58SA36-300 | 36 | 300 | 395 | 23 | 47 | 57 |
Products Show
Our Services
1. OEM service
2. Warranty: 5 years
3. Considerable after sale service
Color steel Compact pressure Thermal solar heater
FAQ:
1. What’s the delivery time?
10 days after receiving deposit.
2. How long is the warranty?
5 years for whole system, 1 year for accessory
3. What’s your production capacity?
6000sets/month
4. What’s the MOQ?
1 set.
5. What’s your payment term?
Container: 30% T/T in advance for deposit, 70% T/T before shipment for fist order.
70% T/T after seeing copy of B/L from second order
Sample: 100% T/T in advance
Other choices: L/C at sight.
6. What certifications do you have?
CE, SOLAR KEYMARK, SRCC and etc.
- Q: What is the impact of nearby power lines or electrical infrastructure on the performance of a solar water heater?
- The impact of nearby power lines or electrical infrastructure on the performance of a solar water heater is minimal. Solar water heaters rely on the sun's energy to heat water, so they are not directly affected by nearby power lines or electrical infrastructure. However, it is important to ensure proper installation and grounding of the solar water heater to avoid any potential interference or safety hazards from nearby electrical sources.
- Q: Can a solar water heater be integrated with existing plumbing systems?
- Yes, a solar water heater can be integrated with existing plumbing systems. It can easily connect to the existing hot water supply line and work in conjunction with the conventional water heating system, providing an efficient and eco-friendly source of hot water.
- Q: How does a solar water heater perform in cloudy or rainy weather?
- A solar water heater's performance is affected by cloudy or rainy weather as it relies on sunlight to heat water. During such conditions, the solar water heater may not be able to generate as much heat, resulting in a decrease in its efficiency and overall performance. However, advancements in technology have led to the development of solar water heaters that can still operate and provide hot water, albeit at a reduced capacity, even in cloudy or rainy weather.
- Q: Can a solar water heater be used in areas with extreme temperature fluctuations?
- Yes, a solar water heater can be used in areas with extreme temperature fluctuations. Solar water heaters are designed to withstand a range of temperatures and can effectively operate in both hot and cold climates. However, it is important to ensure that the system is properly insulated and equipped with temperature control mechanisms to optimize its performance and protect it from potential damage caused by extreme temperature fluctuations.
- Q: Solar water heater does not add water, the sun will not be bad in summer
- Vacuum tube solar water heater with high efficiency in the summer, sunny weather conditions, less than two days water temperature can reach the boiling point, if a long time without water, such as travel, tourism, to make the water a long time at high temperature and high pressure conditions, will accelerate the aging of the sealing ring, accelerated aging, polyurethane shrink, sometimes not exhaust smooth, too much pressure will make the tank expansion bad, will shorten the life of furring, water tank. Therefore, if you are no longer at home, others often should arrange hot water or cold water in the vacuum tube collector is placed on the cover from the sun, stay home, and then removed. If the winter is not a long time. You need to cancel the electric heating setting, to avoid wasting electricity.
- Q: What is the average installation time for a solar water heater?
- The average installation time for a solar water heater can vary depending on various factors such as the complexity of the system, the size of the heater, and the experience of the installer. However, in general, it usually takes around 1-3 days to complete the installation process.
- Q: How does the water quality affect the performance of a solar water heater?
- The performance of a solar water heater can be significantly affected by the quality of the water it uses. One important aspect to consider is the water's hardness, which refers to its mineral content, specifically calcium and magnesium. If the water is hard, it can result in the formation of scale deposits on both the surface of the solar panels and inside the pipes. These deposits can obstruct the flow of water and reduce heat transfer, thereby decreasing the system's efficiency. To prevent this, regular maintenance and cleaning are necessary to eliminate these deposits and ensure optimal performance. Furthermore, impurities present in the water, such as dirt, sediments, or chemical contaminants, can also impact the efficiency of the solar collector. These impurities can block sunlight from reaching the absorber plate, reducing the amount of heat that can be transferred to the water. To avoid this issue and maintain the system's effectiveness, it may be necessary to regularly filter or pre-treat the water. In addition, the quality of the water can also have an effect on the lifespan and durability of the solar water heater. If the water contains corrosive elements or has high acidity levels, it can cause damage to various components of the system, including the solar collector, pipes, and storage tank. This can lead to leaks, decreased performance, and ultimately, expensive repairs or replacement. To summarize, it is crucial to ensure good water quality in order to maximize the performance and longevity of a solar water heater. Regular cleaning, filtration, and water treatment measures should be implemented to prevent scale formation, blockages, and corrosive damage. By doing so, the system can operate efficiently and effectively.
- Q: Do solar water heaters need electricity?
- Working principleThe sun through the first layer of glass heat pipe according to black heat absorbing layer second layers of glass, solar energy heat absorption, because between two layers of glass is vacuum insulated, the heat transfer will be greatly reduced (heat radiation still exists, but there is no thermal conduction and convection), most of the heat is only transmitted to the glass tube the water inside the glass tube, heating water, heating water and light along the glass tube heating surface to enter the insulation water storage barrel, the barrel temperature is relatively low water along the glass tube into the back surface of glass tube, this constant cycle, the preservation of the water in the water bucket so as to achieve the continuous heating, hot water the purpose of.
- Q: How does a solar water heater impact the resale value of a property?
- A solar water heater can positively impact the resale value of a property. It is considered a valuable and eco-friendly addition, which can attract environmentally conscious buyers. The cost savings associated with reduced energy bills and potential tax incentives can also make the property more appealing, potentially leading to a higher resale value.
- Q: How does the location of the solar water heater affect its performance?
- The location of a solar water heater can significantly affect its performance. Ideally, the heater should be installed in an area with ample sunlight exposure throughout the day. If the location is shaded or receives limited sunlight, the efficiency of the solar panels will be reduced, resulting in decreased heating capacity. Additionally, the orientation and tilt of the panels should be optimized to maximize solar radiation absorption. The location should also consider factors such as wind, temperature, and potential obstructions to ensure optimal performance and efficiency of the solar water heater.
Send your message to us
Solar Water Heater Parts:Solar Collector with Copper Coil in Water Tank 2024 New Design
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords