Plastic Tubes Single Blade Labyrinth Drip Irrigation Tape Irrigation System
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 888 m
- Supply Capability:
- 999999000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Single Blade Labyrinth Type Drip Irrigation Tape Irrigation System
Features of Single Blade Labyrinth Type Drip Irrigation Tape Irrigation System .
1. Turbulent flow state and the pressure compensation function.
2. The labyrinth flow path is shaped at one-off vacuum hot pressure with high accuracy.
3. Many water entrances which can prevent tape from clogging.
4. Water-dripping volume is even and consistence.
Specifications of Single Blade Labyrinth Type Drip Irrigation Tape Irrigation System
Outside diameter | Thickness (mm) | Rated working pressure (Mpa) | Water discharge rate(L/H) | Water outlet space (mm) | Filter mesh quantity (mesh) | Max. Paving length (m) | Even degree (%) | Each roll length(m) |
¢12 ¢16 ¢20
| 0.18-0.22 | 0.1 | 1-6L/H | 100/150/ 200/250/300 | 120 | 80 | ≥90 |
Advantage of Single Blade Labyrinth Type Drip Irrigation Tape Irrigation System
1.Cutting down production costs.
2.Decreasing damage from insects.
3.Increasing productivity.
The specification of HDPE pipes and UPVC pipes for Agriculture Greenhouse
Part No. | Inch Size | I.D | O.D | Thickness | W.P. | B. P. | Length |
inch | mm | mm | mm | bar | bar | m/roll | |
GNSD20-22.7 | 3/4" | 20 | 22.7 | 1.35 | 7.0 | 21.0 | 100 |
GNSD20-23.1 | 3/4" | 20 | 23.1 | 1.55 | 10.5 | 31.5 | 50 |
GNSD26-28.6 | 1" | 26 | 28.6 | 1.30 | 4.0 | 12.0 | 100 |
GNSD26-29.0 | 1" | 26 | 29 | 1.50 | 7.0 | 21.0 | 100 |
GNSD26-29.4 | 1" | 26 | 29.4 | 1.70 | 10.5 | 31.5 | 50 |
GNSD33-35.4 | 1-1/4" | 33 | 35.4 | 1.20 | 4.0 | 12.0 | 100 |
GNSD33-35.6 | 1-1/4" | 33 | 35.6 | 1.30 | 7.0 | 21.0 | 100 |
GNSD33-35.9 | 1-1/4" | 33 | 35.9 | 1.45 | 10.5 | 31.5 | 50 |
GNSD41-43.5 | 1-1/2" | 41 | 43.5 | 1.25 | 5.0 | 15.0 | 100 |
GNSD41-43.9 | 1-1/2" | 41 | 43.9 | 1.45 | 7.0 | 21.0 | 100 |
GNSD41-44.8 | 1-1/2" | 41 | 44.8 | 1.90 | 10.5 | 31.5 | 50 |
GNSD45-48.2 | 1-3/4" | 45 | 48.2 | 1.60 | 8.0 | 24.0 | 50 |
GNSD45-49.0 | 1-3/4" | 45 | 49 | 2.00 | 10.5 | 31.5 | 50 |
GNSD53-55.0 | 2" | 53 | 55 | 1.00 | 4.0 | 12.0 | 100 |
GNSD53-55.6 | 2" | 53 | 55.6 | 1.30 | 6.0 | 18.0 | 100 |
GNSD53-56.0 | 2" | 53 | 56 | 1.50 | 8.0 | 24.0 | 50 |
GNSD53-57.1 | 2" | 53 | 57.1 | 2.05 | 10.5 | 31.5 | 50 |
GNSD66-68.3 | 2/1/2" | 66 | 68.3 | 1.15 | 4.0 | 12.0 | 100 |
GNSD66-69.4 | 2-1/2" | 66 | 69.4 | 1.70 | 7.0 | 21.0 | 100 |
GNSD66-70.3 | 2/1/2" | 66 | 70.3 | 2.15 | 10.5 | 31.5 | 50 |
GNSD78-80.1 | 3" | 78 | 80.1 | 1.05 | 4.0 | 12.0 | 100 |
GNSD78-80.9 | 3" | 78 | 80.9 | 1.45 | 6.0 | 18.0 | 100 |
GNSD78-82.5 | 3" | 78 | 82.5 | 2.25 | 9.0 | 27.0 | 100 |
GNSD78-83.0 | 3" | 78 | 83 | 2.50 | 10.0 | 30.0 | 50 |
GNSD104-106.4 | 4" | 104 | 106.4 | 1.20 | 4.0 | 12.0 | 100 |
Certificate of new Plastic Agriculture Irrigation Pipe for Greenhouse:
SGS report for PVC Layflat Hose, which comply with RoHS Directive 2011/65/EU Annex II; recasting 2002/95/EC.
Applications of new Plastic Agriculture Irrigation Pipe for Greenhouse :
PVC layflat hose is widely used for drainage in the fields of agriculture irrigation, gardening irrigation,forestry sprinkler irrigation, construction project, industrial and mining.
Package of new Plastic Agriculture Irrigation Pipe for Greenhouse:
PVC layflat hoses are wrapped by plastic woven cloth,with both sides covered by carton board,fix with ropes or packing straps.
FAQ
1.What kind of products do we produce?
The main productions of company are dripping irrigation tubes, sprinkling irrigation equipments,filter, fertilizing system, pipe fitting, tubes, and developments of new technology.
And meanwhile the company can provide customer the technology consultation and service for integratedwater and fertilizer solution.
2.which kind of certificate we have ?
ISO9000 certification is company’s management foundation. The all indicators of productions reached national standard after detecting by Ministry Water Resources Irrigation and Drainage Center and the company obtained the irrigation level II qualification.
3. what is the payment term ?
We accept LC ,TT etc .
- Q: How do plastic tubes compare to PVC pipes in terms of flexibility?
- Plastic tubes are generally more flexible than PVC pipes. While PVC pipes are rigid and inflexible, plastic tubes can bend and conform to different shapes and angles more easily.
- Q: I recently bought a '95 C220, shes my first MB and after a week of driving I have vowed to never buy any other brand of car. I think i've just about figured out all of her idiosyncricies, however this one still confuses me. There is a small 1/4 diameter or so plastic tube comming out of the floor to the left the battery/fuse box in the trunk, about 8 inches long or so. It has an L connector on the end, but it is not fastened to anything, nor can i find anything that it could fasten to. Any clues anyone? Vaccume tube for some component that was never installed?
- i own a repair shop,and its called a battery drain off tube in case the battery spews over or something ,this routes in down toward the bottom of the car instead of letting it stay in the battery tray and eating it up,good luck i hope this help,s.
- Q: What are the advantages of using plastic tubes over other materials?
- Plastic tubes offer several advantages over other materials, such as being lightweight, durable, and resistant to corrosion. They are also cost-effective and can be easily molded into various shapes and sizes. Additionally, plastic tubes are non-conductive, making them suitable for electrical applications, and they have excellent chemical resistance, making them suitable for a wide range of industries.
- Q: I am trying to design a tube that needs a lid which will have rubber seals. therefore i need to figure out what the series roughness should be on the tube where the rubber seals need to sort of slide in. the tube is about 12.5in long and will be smooth 1.5in in on the inside and the cover goes 1.5in into the tube when put on the tube. This is for work, i am just trying to finish my drawings for this product.
- 63 u/in will be fine.
- Q: Are plastic tubes suitable for hydroponic systems?
- Yes, plastic tubes are suitable for hydroponic systems. They are commonly used as a conduit to supply nutrient-rich water to the plants' roots in hydroponic setups. Plastic tubes are lightweight, durable, and resistant to water, making them a practical choice for circulating the nutrient solution within the system. Additionally, plastic tubes can be easily configured and customized to fit different hydroponic setups, allowing for flexibility and convenience in designing and maintaining the system.
- Q: Do plastic tubes have any limitations in terms of flexibility or rigidity?
- Yes, plastic tubes do have limitations in terms of flexibility and rigidity. The flexibility of plastic tubes depends on the type of plastic used and its thickness. Some plastics are more flexible than others, but they all have a certain degree of flexibility. However, plastic tubes cannot be as rigid as metal tubes, as they tend to bend or deform under pressure or when exposed to extreme temperatures.
- Q: I once saw a tunnel tube part that is just a small flat part with holes in it. It would allow you to connect, say, two cages together and allow the hamsters in those cages to see and smell each other but NOT pass through. I have been looking for this part but I cannot seem to find it again. If anyone has a website, I would appreciate it very much
- So okorder /... The Super Pet Crittertrail Fun-Nels E-Z Climbers Cage Accessory Value Pack consists of rings, plugs, and plastic tubes that enable you to create plastic tunnels, which you can easily set up inside or outside your pets' cage. I am assuming the plugs are the things that block off the tunnel. I'm unsure if there are any holes in them but if worst came to worst you could always just use a drill and drill small holes into the plug.
- Q: Can plastic tubes be used for pet food packaging?
- Yes, plastic tubes can be used for pet food packaging. They are lightweight, durable, and can be easily sealed to maintain freshness and prevent contamination. Additionally, plastic tubes can be designed with convenient dispensing mechanisms to make it easier for pet owners to serve their pets' food.
- Q: Can plastic tubes be used for pneumatic conveying?
- Yes, plastic tubes can be used for pneumatic conveying. Plastic tubes are commonly used in pneumatic conveying systems due to their lightweight, flexibility, and resistance to corrosion. They are able to transport a wide range of materials, including powders, granules, and pellets, making them a versatile choice for pneumatic conveying applications.
- Q: Do plastic tubes come in different colors?
- Yes, plastic tubes do come in different colors.
Send your message to us
Plastic Tubes Single Blade Labyrinth Drip Irrigation Tape Irrigation System
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 888 m
- Supply Capability:
- 999999000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords