RT-9500 Two-Part Silicone Structural Sealant for Buildings
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
RT-9500 is two-component, neutral fast curing , high flexibility, high modulus with excellent performance silicone sealant.
Without primer to most building materials can be obtained excellent bonding and sealing properties,
and has good extension, watertight and so on.
Products formed after curing cold, heat, corrosion-free elastomer, excellent weather resistance, aging resistance, UV resistance, high and low temperature performance and resistance to ozone pollution to the environment.
Component A of this product is white, and B is black,
A / B component by volume ratio of 10:1 (mass ratio 12:1) mixed use, mixed color is black.
Have good compatibility with other silicon sealant of Ruentec.
Specifications
Ptosis degree | Standard (23 ± 2 °C) Surface drying time min | Shore hardness A | Application of | Modulus MPa | Displacement capacity | For the tensile adhesion |
≤1 | ≤180 | 35~50 | ≥20min | ≥0.6 | ±25% | No damage |
Instructions for use:
Before mix the A and B part, the user can also change the mixing ratio according to actual needs,(volume ratio between 8:1 ~ 12:1).
In the outdoor temperature environment, don't construct when the substrate surface temperature exceeds 40 °C.
Prior to use adhesive materials compatibility testing to confirm compliance before construction.
Construction materials in contact with the structure of the surface must be clean and dry.
Construction Abstract:
It is not suit to all leaking oil, plasticizer or solvent surface.
Not for frost or wet surface.
Not suitable for long-term immersion or wet places throughout the year.
B component can be react with water vapor in the air, don't exposure in the air for long.
Safety:
It will be cast out of volatile compounds before and during the curing, it will be harmful to health if inhale high concentrations of volatile compounds in long time. Therefore, please pay more attention to maintain good ventilation in the work place.
It is not good to touch the sealant directly for a long time. If it inadvertently enter in the eyes, rinse with plenty of water immediately , if necessary, please ask the doctor for help.
Cured silicone sealant will not release harmful substances, it would not jeopardize the skin too.
If swallow the silicone sealant, please ask the medical treatment immediately .
Keep the children away from it before curing, if swallow, should ask for medical help immediately.
Please put in away from the children.
- Q:The market characteristics of adhesives
- The world's synthetic adhesive industry has entered a highly developed stage, in view of the adhesive and sealing materials in the automotive, aviation industry and transportation and other fields with a wide range of uses, adhesive materials market prospects. In the future, the global market for synthetic adhesives is dominated by low-pollution water-based adhesives and hot-melt adhesives. In order to improve product quality, simplify the operation process and improve the construction efficiency, developed countries have developed a series of special equipment, which not only to synthetic adhesive users to provide a better means of construction, more adhesive industry continues to develop an important condition.
- Q:What are the types of glass adhesives? Is there any toxicity or contamination?
- Weathering silicone sealant for a variety of curtain wall weathering seal, especially recommended for glass curtain wall, aluminum-plastic curtain wall, stone dry hanging weather seal. Weathering sealant suitable for metal, glass, aluminum, tile, plexiglass, coated glass joint seal; weathering silicone sealant concrete, cement, masonry, rock, marble, steel, wood, anodized aluminum Paint the surface of the aluminum seal. In most cases, no primer is required. Mildew silicone sealant is the trend of the future, there are mildew effect of silicone rubber than the average use of plastic longer,
- Q:Adhesive 252 on the human body what harm
- Formaldehyde is colorless, with a strong smell of irritating gas, its 35% to 40% of the aqueous solution known as formalin. Formaldehyde is the original pulp poison, can combine with the protein, inhalation of high concentrations of formaldehyde, there will be severe respiratory irritation and edema, eye pain, headache, bronchial asthma can also occur. Skin direct contact with formaldehyde, can cause dermatitis, stains, necrosis. Often inhalation of a small amount of formaldehyde, can cause chronic poisoning, mucosal congestion, skin irritation, allergic dermatitis, nail keratosis and fragile, nail bed finger pain. Systemic symptoms are headache, fatigue, poor appetite, palpitations, insomnia, weight loss and autonomic disorders. All kinds of man-made sheet (particleboard, fiberboard, plywood, etc.) due to the use of adhesives, which can contain formaldehyde. New furniture production, wall, ground decoration laying, should use the adhesive. Where there is a lot of use of adhesives, there will always be formaldehyde release. In addition, some chemical fiber carpets, paint coatings also contain a certain amount of formaldehyde. Formaldehyde can also come from cosmetics, cleaning agents, pesticides, disinfectants, preservatives, printing inks, paper, textile fibers and other chemical light industrial products
- Q:Application and Research Status of Acrylate Adhesive Adhesive
- Styrene-acrylic emulsion as a class of important intermediate chemical products, has a very wide range of uses, is mainly used for architectural coatings, metal surface latex paint, ground coatings, paper adhesives, adhesives and so on. Styrene-acrylic emulsion because of its excellent performance, relatively low price, and more and more people get the attention, the current research results of styrene-acrylic emulsion after another, the new modified varieties have also been actively developed.
- Q:What is the cover of white pulp, what is the agricultural shrink to help pulp, what is the color paste, adhesives, chemical fast glue?
- Chemical fiber quick-drying glue refers to the chemical fiber materials for the quick-drying glue.
- Q:How do you define Henkel anaerobic adhesive products?
- Anaerobic adhesive sealant (referred to as anaerobic adhesive) is an anaerobic curing characteristics of the adhesive sealant, if the two functions by bonding and sealing points, anaerobic adhesive although there are bonding, but the main The role is sealed lock.
- Q:What are the steel reinforcement methods?
- Resin infusion Epoxy resin is the most common crack infusion material. It has a high mechanical strength, and can resist most of the chemical erosion encountered by concrete, resin can be poured into the 0.05 mm cracks. In addition to some special epoxy resin, when the cracks are active, there is leakage, can not dry or a large number of cracks, usually easy to use resin infusion method. OKorder Metallurgical Engineering Crack Treatment Center developed with the international leading level of engineers Automatic low pressure grouting technology is one of the best method of resin infusion method.
- Q:What are the uses of silicone oil?
- Colorless, odorless, non-toxic, less volatile liquid.
- Q:How to distinguish between good steak and made from the meat of the "synthetic steak"
- The meat of the steak is processed deep, and various ingredients are added, and in order to make the meat sticky tightly, the general use of xanthan gum, carrageenan, glutamine aminotransferase such food additives, when you see the ingredients table Such words, you can determine it is stitching beef.
- Q:Will the height of 2800 into the deep 4500 bay 2700 floor -4500 to be a layer to arrange the door how to arrange the stairs
- Adhesives and special materials: Mosaic fiber mesh adhesives, polyurethane sealant, polyurethane sealant, polysulfide sealant, acid and alkali epoxy clay, acid and alkali epoxy putty, tar modified epoxy anti-skid Layer, polymer repair mortar, non-tar polyurethane waterproof coating, water-based epoxy waterproof sealing layer, rigid / flexible polymer waterproof coating.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
RT-9500 Two-Part Silicone Structural Sealant for Buildings
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords