Raw Materials for Refractory:Bauxite Material Sand Brown Fused Alumina of CNBM in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Bauxite Material Sand Brown Fused Alumina of CNBM in China
1.Structure of Calcined Bauxite Description
calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and
aluminum hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .
calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .this removes moisture thereby increasing the
alumina content. compared to an alumina content of about 57%to 58%in raw bauxite, calcined bauxite has an alumina content of 84% to 88%.the heating is carried out in rotary kilns.
2.Main Features of the Calcined Bauxite
Calcined bauxite is one of the principal ore of aluminum. Calcined bauxite contains hydrous aluminum oxides and aluminum
hydroxides, formed through the laterization of aluminous rocks in tropical and subtropical areas .Calcined bauxite is obtained by calcining (heating)superior grade bauxite at high temperature (from 85OC to 1600C) .This removes moisture there. By increasing the alumina content,compared to an alumina content of about 57%to 58% in raw bauxite, calcined bauxite has an alumina content of 84%to88%.The heating is carried out in rotary kilns.
3.Main usage of the Calcined Bauxite
(1) aluminium industry. Used in national defense, aerospace, automotive, electronics, chemical industry, daily necessities, etc.
(2) precision casting. Alumina clinker made after the mould precision casting processed into fine powder. Used in military industry, aerospace, communications, instrumentation, machinery and medical equipment department.
(3) is used for refractory products. High bauxite clinker refractoriness is as high as 1780, chemical stability strong, and good physical properties.
(4) aluminum silicate refractory fiber. With light weight, high temperature resistance, good thermal stability, low thermal conductivity, heat capacity is small and the advantages of resistance to mechanical shock. Used in iron and steel, nonferrous metallurgy, electronics, petroleum, chemical, aerospace, atomic energy, defense and other industries.
(5) in magnesia and bauxite clinker as raw materials, add the appropriate binder, used for pouring ladle whole ladle lining has particularly good effects.
(6) manufacture alumina cement, abrasive materials, ceramic industry and chemical industry can be aluminum of various compound.
4. Calcined Bauxite Images
5. Calcined Bauxite Specification
Place of Origin: | Henan, China (Mainland) | Shape: | Powder, macrogrit | Material: | alumina |
SiO2 Content (%): | 1.2% | Al2O3 Content (%): | 95.65% | MgO Content (%): | 0 |
CaO Content (%): | 0 | Refractoriness (Degree): | 1770°< Refractoriness< 2000° | CrO Content (%): | 0 |
SiC Content (%): | 0 | Model Number: | brown fused alumina, all models | Brand Name: | CNBM |
Name: | Bauxite Material sand brown fused alumina | Application: | grinding,wire cutting,refractory,buffering | Micro hardness: | HV1800-2200kg/m2 |
Refractoriness: | 1963 | alumina: | 99.5%min | Fe2O3: | 0.1% |
TiO2: | 2.3% | toughness: | great |
6.FAQ of Calcined Bauxite
1). Q: Are you a factory or trading company?
A: We are a factory.
2). Q: Where is your factory located? How can I visit there?
A: Our factory is located in ShanXi, HeNan, China. You are warmly welcomed to visit us!
3). Q: How can I get some samples?
A: Please connect me for samples
4). Q: Can the price be cheaper?
A: Of course, you will be offered a good discount for big amount.
- Q: What advantage and disadvantages it has compared to common fire insulation materials
- Main advantage of A-level fire proof heat retaining plate is A-level non-conbustibility. Now residential areas strictly require the external walls to be high-level fire proof, to be specific, high fire resistance, non combustible. Standards for evaluation varies according to different types, which includes anti-corrosion, acid and alkali resistance, waterproof, anti termites and so on. Disadvantage is the insulation effect is quite ordinary. It will absorb water, get deformed, need some water prevention measures after constrcuting thermal insulating layer for it. Its thermal conductivity far below the benzene plate, and plastic extruded palte, half the thickness of the polyurethane insulation layer can reach heat perservation effectiveness of the benzene plate and extruded plate of the same thickness.
- Q: Refractory material, refractory brick
- 1, according to the degree of refractoriness:Ordinary refractory material: 1580 ~ 1770 DEG CAdvanced refractory material: 1770 ~ 2000 DEG CSuperfine refractory material: >2000 DEG C2, depending on the shape and size of the product:Standard type: 230mm * 113mm * 65mm;No more than 4 measurements, (size ratio) Max:Min<4:1;Profile: no more than 2 concave, (size ratio) Max:Min<6:1;Or an acute angle of 50~70 degrees;Specific type: (size ratio) Max:Min<8:1;Or not more than 4 or a sharp angle; 30 ~ 50 degrees;Special products: crucibles, vessels, tubes, etc.3, according to manufacturing methods, refractory materials can be divided into:Fired products, unfired products, unshaped refractories4. classification according to the chemical properties of materials:Acid refractory material, neutral refractory material, basic refractory material
- Q: About the market issues of thermal insulation material and refractory material.
- In fact, the thermal insulation material produced by the Sichuan-Benniao Hing construction company is very good, you can get the company's information just by inputing the Sichuan-Benniao Hing construction company into Baidu
- Q: what is the original materials of fireproof coating?
- Main raw material includes high-temperature aluminum surface, expanded vermiculite,closed cell perlite, high mark number cement, Fireproof paint itself is flame-retardant or non-combustible, protecting the substrate from direct contact with the air,delaying the time for catching fire and reducing the burning speed. For example, indoor thick fire retardant coating for steel structure.
- Q: Which refractory quality inspection authority is good?
- National testing agencies include National Refractory Inspection Center (i.e. LIRR), China Building Materials Academy (Guanzhuang, Beijing), National Center for Ceramic and Refractory Materials Inspection (Shandong) and China Metallurgical Research Institute (Beijing).
- Q: The following statement is correct: artificial corundum has a high melting point and can be used as a high grade refractory material. The main component is silica dioxide
- 1. corundum is the main component of alumina. 2. agate is the main component of silica. 3. is right. 4. glass is silicate. 5. solar cells are made from monocrystalline silicon. So 3.5 correct, choose D.
- Q: What's the refractoriness and how to measure the refractoriness?
- Bottom each side length is 8 mm and upper side length is 2 mm. Under a certain temperature-rising speed, when heating, refractory's resistance to high temperature from melting is called refractoriness. The properties of cross section into an equilateral triangle and height is 30 mm. When it bends down until the vertex and chassis contact temperature is the refractoriness of sample. It bends due to the influence of its weight. Make the will-measured material into standard pyrometric cone.
- Q: Why the corundum can be used as refractory
- Corundum has high refractoriness, so its high temperature performance is very good.
- Q: who knows the fire endurance of fireproof coating?
- fireproof coating of different thickness differs in its fire endurance. Let me intrduce you as follows: The amount of time of 0.5 hours refractory thickness 0.45mm 0.79kg / m21 hr 0.9 mm 1.5kg / m21.5 hour 1.4 mm 2.3kg / m22 hr 2.0 mm 3.3kg / m22.5 h 2.8 mm 4.6 kg / m2
- Q: Are the rubber insulation materials are refractory materials?
- Bushi
Send your message to us
Raw Materials for Refractory:Bauxite Material Sand Brown Fused Alumina of CNBM in China
- Loading Port:
- Tianjin
- Payment Terms:
- TT or LC
- Min Order Qty:
- 25 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords