Plastic Tubes PVC Pipe 16 to 630mm Specification:16-630mm Length:5.8/11.8m Standard:GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q:What are the types of plastic pipes?
- The production material of rigid PVC pipes is PVC-U mixed ingredients, and the mixture shall be mainly PVC resin, in which the additives necessary for the production of the tubes which meet the requirements of this section shall be added, and all additives shall be dispersed evenly. Mainly used for water supply (non potable water), drainage pipes, storm pipes.PVC pipe has high hardness, stiffness and allowable stress; anti aging ability is good, durable, life can reach 50 years; corrosion resistance, low price, easy adhesion, self extinguishing; Recyclable. The utility model has the advantages of convenient installation, simple and convenient, good sealing performance, no impact resistance, poor durability, high technical requirements for bonding and long curing time.
- Q:How much is the pipe digging face?
- How much is the working surface of the general pipeline, this depends on the design requirements, as well as the pipe diameter. Under normal circumstances, 0.8 meters deep in the ground, in the antifreeze layer is possible, and the width of the combined diameter, usually outside the pipeline to retain the work surface of 30mm-50mm can.
- Q:Are plastic tubes safe for storing chemicals?
- Plastic tubes can be safe for storing chemicals depending on the type of plastic used and the specific chemical being stored. It is important to consider the compatibility of the plastic material with the chemical to prevent any reactions or degradation. Additionally, factors like temperature, pressure, and exposure to sunlight should be taken into account. It is recommended to consult material compatibility charts and guidelines provided by manufacturers or experts to ensure safe and suitable storage of chemicals in plastic tubes.
- Q:PLZ ANSWER
- depends on the use and application. would you prefer orange juice or lemon juice ? depends on your taste...... same thing. so it depens on many thing : cost, fluid to flow, medium temp, pressure, humidity, load type and so on .... good luck.
- Q:So, I went to the dentist today to get my teeth checked out. The oral surgeon said I need two teeth pulled out, but I need to be knocked out cuz it's so bad. He said the way he's gonna do it, is by putting an IV in (scared of needles:( ) and then I asked my mom and she said they were gonna take the needle out and keep a little tube in there? I'm really confused about this. Help please.
- And they do this procedure SEVERAL TIMES A DAY!!!!!!! YOU'LL BE FINE!!!!!!!
- Q:How can the iron pipe be joined to the plastic hose?
- If it is 2 inches below the pipe threaded joint can be connected, if large flange connection is used.Threaded joint can be divided into inner and outer thread connector joint, like a screw connection, connection to connect the joints to prevent raw materials with Water Leakage.It's easy to open the iron tube. The hardware store has a wire opening machine. Turn it several times.
- Q:i was thinking sterilization cause due to being a surgical instrument, but can we sterilse plastic in autoclave or UV lights? confusing question.......
- Most plastic stuff comes already sterile from the manufacturer. There is the option of gas sterilization, if the tubing won't survive an autoclave. Most surgical instruments are metal and ARE re-sterilized, at least in the OR's where I work. We don't reuse tubing.
- Q:How do you prevent plastic tubes from yellowing over time?
- To prevent plastic tubes from yellowing over time, it is important to store them away from direct sunlight and extreme temperatures. Exposure to UV rays and heat can accelerate the yellowing process. Additionally, using UV-resistant or stabilized plastic materials can help maintain the tube's clarity and prevent yellowing. Regular cleaning and maintenance with mild, non-abrasive cleaning solutions can also help in preserving the tube's appearance.
- Q:How to remove dirt on the inner wall of plastic pipe?
- 1. flush with high pressure water2. dilute the caustic soda and pour it into the drain pipe3. buy a bucket of battery and pour it into the drain.4. put a little dilute sulfuric acid
- Q:What is a tube bird feeder?
- A okorder /
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
Plastic Tubes PVC Pipe 16 to 630mm Specification:16-630mm Length:5.8/11.8m Standard:GB
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m
- Supply Capability:
- 9999 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
