PVC hot cutting pelletizing line mould face granulating line
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PVC hot cutting pelletizing line
Principle and applications:
With CE certifications, we have exported to all over world, such as Poland, Germany, Brazil, Holand, etc. With the better after sale service, we are always give our customer the best production line.
With different designs of screw,this machine can be applied to granulate the recycled material of rigind PVC,soft PVC and waste PVC.It can be stopless in the course of production.It uses pneumatic conversion and strong wind blowing.At the same time can adjust stainless steel storage container and can run at high speed for along time while extrude stably.
Main complete granulator line contain:1.Conical twin screw extruder2.Granulator mould3.Hot cutting device4.Blower&Storage hopper
Main technical standards:
Type of extruder | SJSZ80 | SJSZ65 | SJSZ51 |
Power | 55kw | 37kw | 22kw |
Capacity | 350kg/h | 250 kg/h | 150 kg/h |
Grain diameter | 3mm | 3mm | 3mm |
Total length of production line | 15m | 15m | 12m |
Item | SJZ-51/105 | SJZ-65/132 | SJZ-80/156 | SJZ-92/188 |
Screw diameter(mm) | 51/105 | 65/132 | 80/156 | 92/188 |
Screw amount | 2 | 2 | 2 | 2 |
Screw turning | Different direction forth | |||
Screw rotate speed(r/min) | 1-30 | 1-34.7 | 1-36.9 | 1-32.9 |
Screw effective working length(mm) | 1200 | 1440 | 1800 | 2500 |
Main motor power(kw) | 22 | 37 | 55 | 90 |
Barrel heating power(kw) | 18 | 24 | 38 | 86.8 |
Production capacity(kg/h) | 80-140 | 250-300 | 320-450 | 500-600 |
Machine center height(mm) | 1000 | 1000 | 1000 | 1200 |
Net weight(kg) | 3500 | 4000 | 5000 | 10000 |
Exterior measure(long*wide*high) | 3620*1050*215 | 4235*1520*2450 | 4750*1550*2460 | 6725*1550*2814 |
- Q: How should maintain plastic granulator
- The moving knife and the fixed knife sharpness and clearance check. Wear and change of traction roller.
- Q: Is environmental protection approved for plastic granulation?
- A project does not require EIA, and the EIA is a report or a report form, according to the State Environmental Protection Department's "construction project environmental impact assessment classified management list" of the coming.
- Q: How about the granulator?
- In the development of drying equipment, research and innovation and innovation, a series of advanced and energy-saving products are designed and manufactured. It has developed more than 40 kinds of drying, granulating, mixing, dust series according to the needs of the market, the drying products are widely used in pharmaceutical, chemical, food, light industry and other industrial raw materials or products, praised by users. Customer acceptance test and inspection are welcome.
- Q: Plastic granulator feed roller does not turn is what reason
- There is also a two axis of its own teeth rotation, it may be broken bearings.
- Q: how about the market demand, which kinds of particles are usually divided? Which particle has a higher profit margin?
- First, the salesman's task is according to customer requirements and designers to cooperate with the printing program, and confirmed by the customer. Raw materials for customers are generally: 1, Wen Dang (not necessarily standard). 2, in kind. 3 oral or written product description. To be as detailed as possible, if the conditions, so that customers and designers face to face, easier to complete the design faster. Two, according to the salesman: 1, the customer has confirmed the program (usually a single version of the design). 2, production quantity and economic benefits. 3, printing machines and other production equipment requirements (first on the boot). Process for production and imposition jointly determine the production department, business department, and the scheme to allow the designer to perform. Three, according to the technical scheme designer imposition, film output, proofing proofing confirmation print version of the housing.
- Q: how much the price, I hope to know a friend told me Oh, thank you ah!
- We have been committed to the research and development of plastic extrusion machinery technology, the market for plastic extruder universal low productivity and short service life, high power consumption, in the mechanical design, according to the needs of different customers and different raw materials, developed separation screw, high mixing screw, machine tube technology KIV and with the use of hard tooth, mute type reducer, effectively solve these problems, the effective capacity of extruder with same specification and same type of plastic will increase from 20% to 30%, the actual power consumption is reduced by about 20%, the real implementation of the high capacity, long service life and low power consumption.In some developed countries, foreign enterprises and joint ventures on the type of environmental protection requirements, including noise control, exhaust gas treatment, closed the smoke, dust, and different frequency voltage, motor, we can achieve the design and manufacturing requirements.We follow the requirements of ISO9001 quality control system, establish a complete and standardized internal technical standards and quality control procedures, control point from the whole process of pre-sales service to product design, manufacturing, customer service service, to create a full range of its product quality, we have a number of years engaged in plastic granulator research and development, manufacturing and service a professional engineering team and staff, provide a solid guarantee for the customer confidence.
- Q: The difference between the whole machine, granulating machine, granulating machine of the three English translation?
- Features: complete machine without dead angle, residual, concave convex surface and screw, easy to clean. ? highly polished inside and outside surfaces. The inner surface roughness Ra is less than or equal to 02 m, and the surface roughness Ra is less than or equal to 0.4 mu m. ? equipped with casters door type high support, and NTF series lifting machine and LD series mixing hopper supporting the use of, optimize the process flow. ? all parts can be disassembled and cleaned conveniently
- Q: May I ask who knows the plastic granulator manufacturers contact ~ figure
- China is the same, who knows who ah?. Otherwise, better contact
- Q: What plastic particles are used for wire injection? How much would you like to invest in a plastic pelleting plant?
- Wire is generally used PVC majority, there are some cable, fiber cable with HDPE, LDPE, EVA and so on.
- Q: How can the granulator recycle the plastic bottle?
- Well, what is the sorting process of the plastic granulator?A typical process in which the discarded bottles will be sorted first on the basis of color and size sometimes. Once sorted, they need to be washed away; however, the washing machine, while in a piece, is not the most advantageous way. Therefore, to facilitate the washing process, the bottle is likely to be broken down into small pieces. Plastic granulator, plastic grinding machine can be used to do work, such as Jordan to reduce the manufacture of solutions. They let a shredder break down into smaller sizes and then send it to the cleaning station for a wide variety of plastic and PET containers. Check out some plastic crush videos. Once the bottle is torn and a suitable size is washed, they are not yet ready for processing into other goods.
Send your message to us
PVC hot cutting pelletizing line mould face granulating line
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
