PTFE Coated Fiberglass Fabric
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000m2 m²
- Supply Capability:
- 1000000M2 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of PTFE Coated Fiberglass Fabric:
CNBM uses the best imported fiberglass as the weaving material to plain weave or twill weave or satin weave or special weave into superior fiberglass basic cloth, coating PTFE resin then make it into various PTFE Teflon high temperature resistance clothes in different thickness and width.
Properties of PTFE Coated Fiberglass Fabric:
1.Stable dimension, high strength, elongation coefficient less 5%.
2.Good temperature resistance, 24 hours working temperature -70°C~260°C.
3.Low friction coefficient, good insulating ability.
4.Non stick, easy to clear stains and adhesives on the surface.
5. Good chemical resistance, it can resist most of chemical medicines, acids, alkalis, and salt, it is fireproof, anti aging.
Applications of PTFE Coated Fiberglass Fabric:
1.Used as various of liners of high temperature resistance, such as microwave liner, and other liners.
2.Used as non stick liners, intermediate.
3.Used as various conveyor belts, fusing belts, sealing belts and those needs performances of high temperature resistance, non stick, chemical resistance etc.
4.Used as covering or wrapping material in petroleum, chemical industries, as wrapping material, insulating material, high temperature resistance material in electrical industries, desulfurizing material in power plant etc.
Specification of PTFE Coated Fiberglass Fabric:
Model | Colour | Thickness (mm) | Max Width (mm) | Weight (g/m²) | Tensile Strength (N/50mm) |
CNBM-9008AJ | Brown | 0.08 | 1250 | 158 | 500/480 |
CNBM -9008BJ | Black | 0.08 | 1250 | 160 | 620/460 |
CNBM -9008Y | Black | 0.08 | 1250 | 180 | 930/720 |
CNBM -9013AJ | Brown | 0.13 | 1250 | 260 | 1100/1000 |
CNBM -9013BJ | Black | 0.13 | 1250 | 275 | 1000/960 |
CNBM -9013Y | Black | 0.13 | 1250 | 290 | 910/880 |
CNBM -9018AJ | Brown | 0.18 | 1250 | 395 | 600/1600 |
CNBM -9018BJ | Black | 0.18 | 1250 | 415 | 1500/1500 |
CNBM -9025AJ | Brown | 0.25 | 2800 | 490 | 2100/1800 |
CNBM -9025BJ | Black | 0.25 | 2800 | 510 | 2800/2700 |
CNBM -9035AJ | Brown | 0.35 | 3200 | 660 | 2700/2600 |
CNBM -9035BJ | Black | 0.35 | 3200 | 680 | 2100/2200 |
CNBM -9040AJ | Brown | 0.40 | 3500 | 780 | 2900/3100 |
CNBM -9040BJ | Black | 0.40 | 3500 | 820 | 3000/2900 |
CNBM -9065AJ | Brown | 0.65 | 4000 | 1150 | 4200/4000 |
CNBM -9090AJ | Brown | 0.90 | 4000 | 1550 | 6300/5800 |
CNBM -9090BJ | Black | 0.90 | 4000 | 1650 | 6150/5300 |
- Q:How is fiberglass mesh used?
- The wall should be cleaned before paving and the pits will be patched and leveled
- Q:What's the use of fiberglass mesh?
- Glass fiber mesh cloth with alkali resistant fiberglass mesh, it uses alkali free glass fiber yarn (the main ingredient is silicate, good chemical stability) by structure leno weaving and special organization, after the anti alkali, heat setting treatment such as reinforcing agent.
- Q:Can fiberglass mesh waste be recycled? What can you do if you can?
- What is more the incineration of waste mesh, which is of serious pollution damage behavior of soil air, acrylic mesh after high temperature can produce pungent odor, destroying the respiratory system and strong material, the core material is flame retardant fiberglass mesh product is burning up, so it is a serious pollution of soil caused by.
- Q:What is the use of alkali resistant fiberglass mesh cloth on the exterior wall?
- Standard: to strengthen the material function and alkali fiberglass mesh cloth to external wall thermal insulation layer, the main role is: to improve the mechanical strength of the surface layer, ensure the continuity of the surface layer resistance, shrinkage pressure and insulation dispersed surface layer stress, avoid stress concentration, surface resistance nature temperature and humidity changes and accidents caused by the impact of the cracking. Therefore, alkali resistant glass fiber mesh fabric plays an important role in the external insulation system, so the selection of good glass fiber mesh fabric is also an important component to ensure the comprehensive quality of the external insulation system. The current national standard technology of exterior insulation (JG149-2003): glass fiber warp and weft resistance tensile strength shall not be less than 750N/50mm, alkali resistant tensile strength retention rate of not less than 50%, more than 130 grams of weight per square meter.
- Q:What is the quota of alkali resistant fiberglass mesh cloth sleeve?
- 5 thick wall plastering mortar is pressed into the middle layer of alkali resistant glass fiber mesh, 03 quota is not suitable to apply the quota items, should set their own preparation of the quota items.
- Q:The building is how to choose the external wall thermal insulation material of glass fiber mesh cloth?
- When the heat of the interior passes through the wall mesh, the insulation will be cut off and retained, and when the room temperature falls. The wall of the heat will be released, by adjusting the indoor temperature; in the summer, glass fiber mesh insulation would block the sun's radiation and external heat into the room, so that the indoor situation of "cool", and the ten seasons and pleasant residential Polygonatum and physical skills improved significantly
- Q:Glass fiber mesh cloth, crack mortar, tiling there is no problem?
- It would be to see how the strength of cement foam insulation board, and you paste the process in order to improve the strength, you can use 1 to 1 fiber cement mortar with latex mixing, can increase the thickness and strength, the cost will be reduced, it can in the brick veneer.
- Q:What are the transverse and longitudinal tensile forces of alkali resistant glass fiber mesh cloth?
- No, it should be a large longitudinal tension
- Q:Glass fiber mesh fabric stereotypes poor, general use of glue is acrylic emulsion, please add what accessories, you can finalize a better shape
- To increase the penetration of some surface active agent, increase the permeability of the emulsion, adding some phenolic thermosetting resin, melamine formaldehyde and improve sizing effect, to prevent the resurgence of soft, adding cationic film plasticized thermosetting resin while reducing fiber absorption and softening fiber
- Q:What is the difference between alkali resistant fiberglass mesh and glass fiber mesh fabric?
- Alkali resistant glass fiber mesh cloth on the alkali or alkali glass fiber woven fabrics based coating formed by the alkali, the product of high strength, good bonding, docile, excellent positioning, widely used in the reinforcement of walls, wall insulation, roofing and other aspects
1. Manufacturer Overview |
|
---|---|
Location | Jiangsu,China |
Year Established | 2005 |
Annual Output Value | US$5 Million - US$10 Million |
Main Markets | North America Eastern Europe Southeast Asia Mid East Eastern Asia Western Europe |
Company Certifications | ISO9001:2008 |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | Shanghai |
Export Percentage | 71% - 80% |
No.of Employees in Trade Department | 3-5 People |
Language Spoken: | English, Chinese |
b)Factory Information | |
Factory Size: | 3,000-5,000 square meters |
No. of Production Lines | Above 10 |
Contract Manufacturing | |
Product Price Range | High and/or Average |
Send your message to us
PTFE Coated Fiberglass Fabric
- Loading Port:
- China Main Port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1000m2 m²
- Supply Capability:
- 1000000M2 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
New products
Hot products
Hot Searches
Related keywords