Plastic Tubes PPR Pipe for Landscape Irrigation Drainage System from China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product Overview
1) Cold / hot water supply facilities for public buildings
2) Food, chemical, electronic industry pipeline networks; Such as Pipeline networks for transporting all kinds of corrosive liquids
3) Drinking water production system pipeline networks; Such as Pure water and mineral water
4) Air conditioning facility pipelines
5) Compressed gas pipeline networks for industry
6) Pipeline networks for swimming pools
7) Pipeline networks for solar energy facilities
8) Agriculture and garden production transporting systems
Specifications
Standard: DIN8077/8078
Material: R200P from Korea
Size: DN20-63
Color: Green, White, Grey, Blue
Packaging Details: PE bag + carton
Delivery Detail: 15 Days
Packaging Details:
1. Large carton: 515 x 400x 220 Cubage: 0.04532 M3
Small carton: 390x255x250 Cubage: 0.0248 M3
2. PE poly bag+ carton Delivery Detail: 15 days/ 20" container; 25 days/ 40HQ
Product Description
1.Material : | PPR |
2.Color: | White, Gray, Green, or as you required. |
3.Size: | 20-110mm |
4.Logo: | CMAX or Customized |
5.MOQ | 500pcs |
6.Samples Time: | (1) 4-5days-If you want to customize your logo. |
(2) 1day-For our existing samples for reference. | |
7.OEM Accepted | Yes |
8.Certification available: | Yes |
9.Packing Details: | Weaving Bag |
10.Production Capacity: | 5,000,000pcs Per month. |
11.Payment Term: | (1) L/C,T/T,D/P |
Product Show
Advantanges
1, High Temperature Resistance: the maximum sustained working temperature is up to 70 Degrees Celsius, the maximum transient temperature is up to 95 Degrees Celsius.
2, Heat insulation and Saving Energy: low thermal conductivity which is only 1/1500 of brass pipe, and 1/250 of steel pipe.
Non-toxic: no heavy metal additives would not be covered with dirty or contaminated by bacterium.
3, Corrosion Resistant: resist chemical matters or electron chemical corrosion.
4, Lower Installation Costs: light weight and good hot-melt performance can reduce installation costs by as much as 50% over metal piping system.
5, Higher Flow Capacity: smooth interior walls result in lower pressure loss and higher volume than metal pipes.
6, Long Life: more than 50 years under normal conditions.
7, Recycled and Environment-friendly
FAQ
Q1: How Can I Get A Sample?
A1: You can get samples by communicate with our export sales.
Q2: How Long Is Delivery?
A2: Delivery time will be30-45days according to order quantity.
Q3: What Is The MOQ?
A3: MOQ depends on different items.
Q4: What Is Our Normal Payments Terms?
A4: Our normal payment terms now is: T/T, L/C or western union, pay
- Q: Can plastic tubes be used for 3D printing?
- Yes, plastic tubes can be used for 3D printing. However, they are typically used as a filament delivery system rather than as the material being printed. Plastic filaments are fed through these tubes into the 3D printer's extruder, which then melts and deposits the plastic to create the desired object layer by layer.
- Q: The plastic tubing split for the dispenser. When the water switch is pressed, water goes pretty much everywhere but the glass. The split is in the arch and there doesn't seem to be any slack in the tubing in the door. Can anyone give a hint as to how to get slack in the tubing or access to the tubing in the door?gladly give a best answer and stars for an answer that gets this fixed!! (Well if I get it before I need to call a repair person)
- I fairly have been given one among those refrigerator/freezers as at as quickly as as I had my kitchen remodelled, and on extremely some activities it provide up working, on an comparable time as at as quickly as as I gently warmed each factor available with a heavily-placed hairdryer. One engineer pronounced 'look, woman, you have have been given to recollect that this is not pronounced as an American refrigerator-freezer for not some thing, and you already understand how plenty ice they eat, quite indoors the warmer states? so so which you may extract various bowls of ice from it on a daily basis no count huge form in case you recommend to stick to them or not.' For a on the comparable time as that worked, yet i could desire to admit that sitting someplace on the record of 'subject concerns to get around to doing' is fixing the ruddy ice-dispenser, through certainty it has actual seized up and that i won't be in a position to be waiting to undergo the belief-bearing directly to the disruption of having it fixed yet. i don't comprehend no count huge form if this is your undertaking, yet i presumed i could proportion it.
- Q: Snow tube, plastic sled, or old school wooden sled?
- The best sled I ever had when I was little was one that my step dad made.. It consisted of two old snow skis, and a small wooden seat nailed to them.. and a rope tied on the front of each ski, creating a loop. It was much better than any sled I have ever had.
- Q: the gun works great...until i go to elevate the last shell into the chamber, the plastic cup that seats against the crimps of the shell sticks just enough into the tube to not fully push the shell out and onto the elevator, the spring feels a bit week also, are these springs known for wearing out and are they replaceable? looks like the shell tube has large threads that screw into the receiver but ill be damned if i cant get that thing to twist and unscrew!
- The tube will unscrew, but not easily the first time it comes off. When the mag springs in our department Mossbergs get tired, we replace them with Remington 870 mag springs and they seem to hold up better. Field strip the shotgun. Put the end of the mag tube in a vise and clamp down ONLY on the little rectangle on the end of the tube (NEVER on the tube itself). Insert the wooden handle.of your hammer into the receiver as close to the barrel mount as you can. Evenly as possible rotate counterclockwise. Remember, it's not going to come off easily. When it lets go, remove the tube, the follower and the spring. Do not try to just stretch out the spring a little. It won't work. Replace the spring and put the follower back in. put the tube back on the receiver. I find it easier to push the follower into the tube a little until you get the threads started. be careful not to crossthread. tighten it up the same way you took it off.
- Q: How are plastic tubes recycled?
- Plastic tubes are recycled through a series of steps that typically involve collection, sorting, cleaning, shredding, melting, and pelletizing. Once collected, the tubes are sorted based on their plastic type. They are then cleaned to remove any contaminants and debris. Next, the tubes are shredded into smaller pieces, and the resulting plastic flakes are melted and formed into pellets. These pellets can be used to produce new plastic products, completing the recycling process.
- Q: I was changing my engine oil via the dipstick tube and a special suction device that pumps the old oil out of the sump to be replaced with fresh oil. Unfortunately, i had to patch up a hole in the tube on the suction device with parcel tape/sellotape wrapped around and a small piece of tape (around 2x2 square) fell into the engine dipstick tube and appears to have slid down into the oil sump.Will the oil filter make any difference in keeping melted plastic out of the engine? Am i best calling up the manufacturer, not the dealer as i don't want them to know about my error. The engine still runs and i have driven 20 miles so far with no problems. 2009 year Citroen C1Thanks
- This is worrisome. As the others say, the worst scenario is the tape gets against the pickup screen and suddenly causes loss of oil pressure. If that happens you will immediately get a low oil pressure warning light but that's something you don't want to happen anyway. However since the piece of tape is 2 x 2 or thereabouts at this point it is almost certainly still rolled up and stuck at the bottom of the dipstick tube. There would not be room for it to easily escape and fall into the sump… yet. There should be one or two screws at the bottom of the dipstick tube to secure it to the engine. If you remove those screws and pull the dipstick tube out, with the dipstick unit, you should find the tape at or near the bottom of the tube. Remove the tape, throw it away, put the tube back in, and sin no more.
- Q: i connected a plastic tube about 7 or 8 inchs long onto a butane can im wondering if when i push down on the can and put a match near it can the fire go back into the can and make the can explode and if so how can i stop that from happening and y would it happened
- The fire in this case is a reaction between butane from the can and oxygen from the air. If either one is missing, there can be no fire. The fire cannot propagate back up the tube, since the tube will be filled with pure butane, meaning there will be no oxygen in the tube.
- Q: What are the different end types available for plastic tubes?
- Some common end types for plastic tubes include open ends, closed ends, threaded ends, flanged ends, and snap-on or twist-on caps. These end types serve different purposes depending on the intended use of the plastic tube.
- Q: Are plastic tubes resistant to bending or flexing?
- Yes, plastic tubes are generally resistant to bending or flexing due to their rigid and inflexible nature.
- Q: Can plastic tubes be used for gardening?
- Yes, plastic tubes can be used for gardening. They are commonly used for various purposes such as irrigation, hydroponics, and creating vertical gardens. Plastic tubes are durable, lightweight, and easily customizable, making them suitable for a range of gardening applications.
Send your message to us
Plastic Tubes PPR Pipe for Landscape Irrigation Drainage System from China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 pc
- Supply Capability:
- 100000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
