Prima PVC Tape 8019 Pipe Wrapping Tape
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- USD3000 roll
- Supply Capability:
- 30 Days For 1x20' FCL roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
| BACKING | ADHESIVE | THICKNESS
(mm)
| ADHESION
(N/cm)
| TENSILE
(N/cm)
| ELON-
GATION (%)
| TEMP-
ERATURE (℃)
| FEATURES & APPLICATION |
| PVC | RUBBER | 0.13 | 1.5 | 20 | 180 | 80 | Pipe wrapping protective tape is characterized by weather, rotproof resistance, it is suitable for insulation protection of various pipes. |
| PVC | RUBBER | 0.15 | 1.4 | 22 | 180 | 80 | |
| PVC | RUBBER | 0.17 | 1.4 | 25 | 180 | 80 | |
| PVC | RUBBER | 0.20 | 1.2 | 30 | 200 | 80 | |
| PVC | RUBBER | 0.50 | 1.0 | 50 | 250 | 80 | |
| PVC | RUBBER | 0.115 | 1 | 16 | 150 | 80 | Easy unwinding protective tape is characterized by releasing property used for protection of surfaces |
| PVC | RUBBER | 0.13 | 1 | 18 | 150 | 80 | |
| PVC | RUBBER | 0.15 | 1 | 22 | 150 | 80 | |
| PVC | RUBBER | 0.115 | 1 | 16 | 150 | 80 | General protective tape, used for protection of surfaces. |
| PVC | RUBBER | 0.13 | 1 | 18 | 150 | 80 | |
| PVC | RUBBER | 0.15 | 1 | 22 | 150 | 80 | |
| PVC | RUBBER | 0.11 | 1.2 | 16 | 180 | 80 | Used for protection of glass during blasting. |
| PVC | RUBBER | 0.13 | 1.2 | 18 | 180 | 80 | |
| PVC | RUBBER | 0.15 | 1.2 | 20 | 180 | 80 |
Application of Pipe Wrapping Tape 8019
Used for insulation protection of various pipes. It is characterized by weather, rot-proof resistance.
Backing: Soft PVC
Adhesive:Rubber based adhesive
Thickness: 130,150, 170, 190, 250 micron and other thickness as customers require.
Color:Black, White, etc.
Remarks of Pipe Wrapping Tape 8019
The data above are typical results and subject to change without notice.
Tolerance: Weight and Thickness: ±10%; Width: ±3mm;
Length: Cut Roll & Log Roll ±0.3m, Jumbo Roll ±0.5%.
The products should be stored at room temperature and be kept away wet and/or heat source.
It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied must be clean, dry, and free of grease and oil.
The users should take test and do trial-application on the above products before coming into application so as to witness and ensure suitability for their special purpose and technique.
- Q: What PVC tape is the best? To wear and durable, to the warehouse line, thank you
- Then the thickness of the film, and now on the market all kinds of thickness are, so when buying, than cost-effective. There are 0.13MM, 0.15MM, 0.16MM, 0.17MM. I suggest using 0.17MM
- Q: Which is better for polyethylene foam film with low foaming interval?
- Bridging polyethylene foam low crosslinking (also known as chemical cross-linked polyethylene foam material) XPE, the product is made of low density polyethylene (LDPE) and ethylene vinyl acetate copolymer (EVA) as the main raw material, adding foaming agent AC and other chemical raw materials, mixing, processing, forming, and then after foaming and shaping, a series of postprocessing process produced a very fine,
- Q: What's the maximum temperature of plastic tape?
- They are all used at 180 degrees Celsius, her limit is 260 degrees Celsius, and the production temperature should be 370 degrees celsius!
- Q: Ordinary electrician tape, glossy, black, plastic like, waterproof tape?
- The electric adhesive tape is a kind of PVC insulation tape with good performance and economical practicability. It has good abrasion resistance, moisture resistance, acid and alkaline resistance and environmental changes (including ultraviolet). The PVC tape has a high dielectric strength. Better mechanical protection can be obtained with good shape and less dosage.
- Q: Reasons for tape degumming
- Because hot melts contain plasticizers and migrate to PVC, they tend to drop in viscosity or even disappear.Four, the surface of the contaminated surface is contaminated with oil or dust, leading to degumming.
- Q: How to improve the tensile strength of PTFE defatted raw meal
- Generally referred to as "non stick coating" or "easy cleaning material". The material has the properties of acid fast, alkali resistance and various organic solvents. It is almost insoluble in all solvents.
- Q: What's the meaning of blue tape in 6S management?
- 6S manage the specification parameters of the line: 4.8 cm wide, 25 meters long, 1.2 square meters in total, 0.15 millimeters thick6S management marking tape application: paste on the ground, wall and machine on the prohibition, warning, reminding and stressing roleThe 6S management mark tape is called "tape" when it is used for zoning. It is called warning tape when it is used as warning. But actually, both are the same thing. When used for zoning, there are no relevant standards or conventions to define what areas are to be divided into colors, and green, yellow, blue and white are commonly used. When used as a warning, according to the GB2893 - 2001 "color" security and the Ministry of health released in 2003 "workplace occupation hazards warning signs", monochrome red, yellow and green color red, green and white and Huang Heidou can be used as a warning line. Here, we propose to make a distinction between the marking tape and the warning tape. White and Huang Helv used as a mark; red, red, white, green, white and yellow black as warning.
- Q: Is the adhesive tape for the electrician plastic?
- Electrical tape is called polyvinyl chloride electrical insulation adhesive tape, and some people call it electrical insulation tape or insulating tape. Not the kind of plastic you call.
- Q: Why are bare wires tied with black tape?
- At the same time, it can provide mechanical protection, acid and alkali resistance, weather resistance and other properties. The electrical adhesive tape can be used for insulation and color marking in various occasions according to requirements.
- Q: Toilet water pipe seam water seepage, with raw tape tight, can you?
- If the water leakage is not very severe, it is OK to apply the glass glue outside the pipe and the leaking place, but the premise is that when the glass glue is applied, the pipe must be dry and keep for more than 12 hours at least.
1. Manufacturer Overview
| Location | Beijing, China |
| Year Established | 1985 |
| Annual Output Value | Above US$ 100 Million |
| Main Markets | 40.00% North America 10.00% Eastern Europe 10.00% Southeast Asia 15.00% Northern Europe 10.00% South Asia 5.00% Western Europe 5.00% Africa 5.00% Mid East |
| Company Certifications | ISO 9001:2008 |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Tianjin Port |
| Export Percentage | 35% - 45% |
| No.of Employees in Trade Department | 50-70 People |
| Language Spoken: | English; Chinese; |
| b) Factory Information | |
| Factory Size: | Above 1,000，000 square meters |
| No. of Production Lines | Above 10 |
| Contract Manufacturing | PVC tape, electrical tapes, PET tape, packing tape,double sided tissue tape |
| Product Price Range | High; Average |
Send your message to us
Prima PVC Tape 8019 Pipe Wrapping Tape
- Ref Price:
-
- Loading Port:
- China Main Port
- Payment Terms:
- TT or L/C
- Min Order Qty:
- USD3000 roll
- Supply Capability:
- 30 Days For 1x20' FCL roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
