PC Frosted Panel and Polycarbonate Solid Sheet
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Product specifications
Item Name | polycarbonate solid sheet | Specific gravity | 1.25 |
Material | polycarbonate | Application Temperature | -40 °C ~+120 °C |
regular Size | 1220*2440mm | Impact Strength | 850J/m |
regular Thickness | 1-15mm | Light transmission | 88% |
Color | transparent/clear | Heat Conductivity | 2.3-3.9 W/ m2°C |
Product categories:
PET Hollow Sheet
polycarbonate hollow sheet
twin-wall polycarbonate hollow sheet
triple-wall polycarbonate hollow sheet
honeycomb polycarbonate hollow sheet
X-profile polycarbonate hollow sheet
solid sheet one sides UV resistant
Application scope of Polycarbonate solid sheet
1. roofing for swimming pool, shopping malls, commercial streets
2. sunshade for stadiums and bus stops, gazebo, open air carport
2. lighting canopy for corridors, passages and subway entries
3. flashing for bank ATMs, telephone box, gateways, garages
4. sound and heat insulation wall for expressways and houses
5. instead of glass, decoration door, curtain wall
6. sound-proof material for partitions
7. unbreakable material for glazing widows, roof glazing.
8. lighting of modern villa, rainproof lighting shed of underground garage entryway
9. front wind shields of motorcycles , airplanes ,trains ,liners, vehicles, motorboats ,submarines and police glass shield
Polycarbonate two wall hollow sheet
Thickness: 4mm / 6mm / 8mm / 10mm
Width: 2100mm
Product Pictures
- Q: What is the difference between sun panels and plexiglass?
- Sun panels are generally hollow, plexiglass is solid. There is one side of the sun is anti-condensation, one side is anti-ultraviolet. Plexiglass on both sides. Sun panels can be exposed directly to the outside, and plexiglass generally can not accept direct sunlight.
- Q: Which friends know how to remove the plastic film on the sun?
- In the PC sun panels and accessories installed when fixed, it is best to tear the protective film 30mm to 50mm, this is to avoid the accessories to suppress the protective film pressure. But should pay attention to is not too much to expose, or easy to install the operation because of scratching the sun plate.
- Q: What is the difference between PC stamina and PC sunboard?
- In addition, the use of sun panels and endurance boards are the same in many ways, but there are also differences, such as sun panels are generally used in the stadium lighting roof, greenhouse lighting ceiling, warehouse lighting roof and so on. Stamina board is used to make shields, outdoor light boxes, advertising signs, etc. are more common. So customers in the choice of PC sun panels, PC Nai Liban or need to be based on their actual use and needs to choose.
- Q: What is the difference between a hollow board and a sunboard?
- The material selected for the panel should be FRP, and the selection material for the sun board is PC. The lighting board is fixed with aluminum fastener, and the corrugated board is fixed with a light plate and a self-tapping screw. The position of the lighting plate is generally set in the middle.
- Q: PC Nai Liban and Sunshine board Which domestic manufacturers of the best products?
- A penny of goods, different prices will have different products, not the best, only the most appropriate!
- Q: How much of the installation of the sun board installation of a square meter
- The sun panels are mainly made of PC / PET / PMMA / PP. English is sunlight, referred to as hollow board, pc sun panels to polycarbonate as the main raw material manufacturing. Sunshine board in the mid-80s into the building materials quickly.
- Q: What is the difference between sun panels and lighting panels?
- Thermal expansion The thermal expansion of the lighting material directly affects the ease of construction, construction costs, and the performance of the water after the completion of the project. Therefore, the thermal expansion of the lighting material in the roof of the web plus color plates is the most important factor in design and construction. FRP thermal conductivity of 0.158w / m.k, light rate of 50% - 85%. PC thermal conductivity of 0.166w / m.k, light rate of 85% - 91%.
- Q: Lighting board and sunshine board which is good?
- This can not say which is better, can only say which product is suitable for you to use, the general enterprise plant lighting with lighting panels, and some flower room on the temperature requirements of the more stringent must use sun panels and shade net supporting the use.
- Q: Can the sun board cover the bedroom?
- is allowed. Insulation: Insulation performance is 40% to 60% higher than glass of the same thickness. Fire resistance: to GB8624 flame retardant level (B1 level) standard. Light weight: the proportion of only the general glass 1/12, and not easy to crush, handling installation time and effort, especially for tall buildings. Easy processing: bending radius up to 175 times the thickness of the plate, suitable for processing a variety of shapes. Greenhouse board energy saving: sun panels have lower than ordinary glass and other plastic thermal conductivity (K value), so that greatly reduce the heat loss, for heating equipment, construction, environmentally friendly materials. Greenhouse Anti-condensation: Under normal circumstances, when the outdoor temperature is 0 ℃, the indoor temperature is 23 ℃, as long as the indoor humidity is less than 80%, the surface of the material will not be condensed.
- Q: What are the differences between plastic endurance boards and sun panels?
- PC board in two kinds - solid for the endurance board, hollow for the hollow board or sun panels.
Send your message to us
PC Frosted Panel and Polycarbonate Solid Sheet
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 200 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords