MECHANICAL YARN TENSION METER
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specifications
yarn tension meter
1.portable,compact,mechanical tension measuring device.
2.dependence and accuracy.
1.Brief introduction of instrument:
Measuring apparatus this adopt accurate transmission device that develop newly,can
make the instrument in measurement steady accurate reading the necessary data fast.
this instrumental error values in positive and negative 1 Newton scope.
In the screen printing of network monitoring silk screen version of the manufacture and
use of the process Screen tension values may also be used for other needs Plane tension
measurement products.
2.Instruction:
1.Before using please put the tension meter on the glass and turn round the dial to make the pointer return to zero.
2.Flick the silk screen during measuring, the indication when the pointer stopped is the tension of the silk screen.
3.Tension meter is precision meter, fall and touch is forbidden, be careful during using.
4.Tension meter has been tested precisely when leave the factory, dismounting alone is
not allowed.
5. Can’t touch the bottom side contactor by hand, put the machine vertically without using.
6. The Newton indication is the indication of the tension’s contactor, the error is +0.5N.
7. The indication of the second circle is the measured value during measuring.
3.Warranty:
NR110 digital colorimeter electronic test instruments is under warranty for 12 months from the purchase
date. Customers must provide warranty card and valid proof of purchase.
- Q: Why the blower suddenly does not turn?
- Check the above are normal circumstances, close to see the soft start or inverter equipment, then check whether there is a display alarm number, according to the alarm content investigation
- Q: How to deal with axial fan noise?
- The turbulence of the fan in operation will also produce a part of the noise, eddy current noise is mainly due to a certain turbulence flow of gas flow to the blade when the flow turbulence noise. Airflow through the blade surface due to pulsating turbulent surface layer of turbulence generated boundary layer noise and some other reasons.
- Q: What are the ventilation ducts for wind turbines?
- 8.5.8 When the electric heater is installed in the duct, the fan shall be interlocked with the electric heater. Electric heater before and after the 800mm within the duct and through the fire and other places with easy fire parts of the pipeline, must use non-combustible insulation materials
- Q: What is the basic principle of an axial fan?
- The cross section of an axial fan is generally a wing profile. The blade may be fixed in position or rotatable about its longitudinal axis. The angle of the blade and the air flow or the spacing of the blades can be adjustable or adjustable. Changing the blade angle or spacing is one of the main advantages of an axial fan. The small blade spacing angle produces a lower flow rate, while increasing the pitch produces a higher flow rate.
- Q: What is the fire axial fan?
- 4. According to the silencer classification of silencer fire high temperature smoke dedicated fan and non-silencer fire high temperature exhaust fan.
- Q: Are Roots blowers the same as vacuum pumps?
- The blower has a simple structure and is easy to manufacture. It is suitable for gas delivery and pressurization at low pressure and can also be used as a vacuum pump.
- Q: How to determine the direction of centrifugal fan?
- When the impeller is clockwise and the fan outlet is in the left to the vertical 90 degrees above the vertical blown gas called the right 90 degrees when the impeller is counterclockwise rotation and the fan outlet in the lower right to the horizontal direction when the gas is called left 0 degrees
- Q: Axial fans, centrifugal fans are called blowers?
- The load behind the wind outlet to become a blower, the load in front of the wind inlet is the fan.
- Q: How to see the axial fan is good or bad?
- Axial fans are mainly composed of fan impellers and housings. The structure is simple but the data is very high.
- Q: How to distinguish between the fan coil around?
- To determine the left and right type, on the one hand is based on the drawings of the water pipe position, and then check the fan coil samples, the sample for the left, the right type will have a convention.
Send your message to us
MECHANICAL YARN TENSION METER
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- -
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords