MD₁Electric Hoist,Electric Hoist, Hoist,General Electric Hoist
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Profile
Main application and scope
Model CD, MD wire rope Electric Hoist is a small-sized and light lifting equipment, which can be mounted on single beam、bridge、gantry and jib crane. With slight modification, it also can serve as winch. Thus, it is widely used in factories、mines、harbors、warehouse、cargo storage areas and shops.It is essential in raising working efficiency and it also can improve working conditions.
Model CD Electric Hoist has only one normal speed, which can satisfy normal supplication. MD Wire rope Electric Hoist is provided two speeds: normal speed and low speed. At a low speed, it can do precise loading and unloading、mounding of sand box、maintenance of machine tools and etc. Thus, MD Wire rope Electric Hoist is more widely used than Model CD.
To meet the needs of lifting heavier cargo, our factory manufactures WH20T and WH32T Electric hoist.
Installation method
First, you need to install the chain box first.
Second, connect the power cord.
When connecting the power cord, must be cut off the power in advance.The ground line should be well grounded at same time, otherwise the operator may feel electric shock when touching any part of the gourd or chain.
Third, the load chain of Lubricated ring chain electric hoist
The lubrication degree of chain is an important factor affecting the service life of load chain.Timely and effective lubrication of load chain can guarantee the effective service life of the chain.
Fourth, check the chain alignment
For multi-chain ring chain electric hoist, should make sure that the hook rack is not flipped.If flipped, return it to normal and ensure that the chain is arranged in line.Do not hang the load on the chain's twisted gourd.
Finally, check the working voltage
Because of the link chain electric hoist out of the factory, they are made according to the user specified voltage or high voltage equipment (only for dual voltage), such as 230/460 v, the operator to check and confirm whether meet the requirements of power supply voltage.If not, please refer to the instructions to meet the required working voltage requirements.
Technical Specification
Type | CD1 MD1 | |||||||||
Lifting capacity(t) | 0.25 | 0.5 | 1 | 2 | 3 | 5 | 10 | 16 | ||
Hoisting height(m) | 3/6/9 | 6/9/12 | 6/9/12/18/24/30 | 6/9/12/18/24/30 | 6/9/12/18/24/30 | 6/9/12/18/24/30 | 9/12/18/24/30 | 9/12/18/24/30 | ||
Hoisting speed(m/min) | 8(0.8/8) | 7(0.7/7) | 3.5(0.35/3.5) | |||||||
Traveling speed(m/min) | 20 | 20/30 | 18 | |||||||
Wire rope | Dia (mm) | 3.6 | 4.8 | 7.4 | 11 | 13 | 15 | 17.5 | ||
specification | 6*19 | 6*37 | ||||||||
Track | 10-20b | 16-28b | 20a-32c | 25a-50b | 32b-50b | 32b-63c | ||||
Min. Curvature radius(m) | 0.8 | 1.5 | 1.5/2/3/4 | 2/2.5/3/4 | 2/2.5/3/4 | 2.5/3/4/4.5/6 | 3.5/4/6/7.5/9 | 3.5/4/6/8/11 | ||
Type | ZD₁12-4 | ZD₁21-4 | ZD₁22-4 | ZD₁31-4 | ZD₁32-4 | ZD₁41-4 | ZD₁51-4
| |||
ZDS₁0.2/0.8 | ZDS₁0.2/1.5 | ZDS₁0.4/3.0 | ZDS₁0.4/4.5 | ZDS₁0.8/7.5 | ZDS₁1.5/13
| |||||
Power(RW) | 0.4 | 0.8(0.2/0.8) | 0.2(0.2/1.5) | 3.0(0.4/3.0) | 4.5(0.4/4.5) | 7.5(0.8/7.5) | 13(1.5/13) | |||
Rotation speed(r/min) | 1380 | 1400 | ||||||||
Current (A) | 1.25 | 2.4(0.72/2.4) | 4.3(0.72/4.3) | 7.6(1.25/7.0) | 11(1.25/11) | 18(2.4/18) | 30(5.2/30) | |||
Type | ZDY₁10-4 | ZDY₁11-4 | ZDY₁12-4 | ZDY₁21-4 | ||||||
Power(RW) | 0.06 | 0.2 | 0.4 | 0.8 | ||||||
Rotation speed(r/min) | 1400 | 1380 | 1380 | 1380 | ||||||
Current (A) | 0.3 | 0.72 | 1.25 | 2.4 | ||||||
No. Of connecting | 120 | |||||||||
Duty classification | Intermediate FC=25% | |||||||||
Power source | Three-phase AC 380 V50Hz | |||||||||
L | 391 | 616/688/760 | 758/856/954/1150/1346/1542 | 820/920/1020/1220/1420/1620 | 932/1038/1138/1327/1533/1738 | 1047/1157/1257/1467/167//1887 | 1602/1783/2145/2507/2869/1872/2092/2532/2952/3387 | |||
L1 | Basic Dimensions (mm) | 78 | 274/364/418 | 345/443/541/737/933/1129 | 352/452/552/752/952/1152 | 380/483/586/792/998/1204 | 415/525/625/835/1045/1255 | 875/1056/1418/1780/2142/1136/1356/1796/2216/2651 | ||
L2 | 216 | 125 | 158 | 187 | 229 | 267 | 301 | |||
L3 | 318/390/462 | 401/499/597/793/989/1185 | 418/518/618/818/1018/1218 | 448/551/654/860/1060/1272 | 485/606/695/905/1115/1325 | 949/1130/1492/1854/2216/1210/1430/1870/2290/2725 | ||||
L4 | 190 | 196 | 240 | 264 | 320 | 376 | ||||
B | 279-315 | 884 | 930 | 1055 | ||||||
H | 423 | 650 | 667/767 | 840/950 | 954/1058 | 1120/1183 | 1350 2100 | |||
d | 17 | 20 | 25 | 25(31) | 25(37) | |||||
b | 185 | 185/270/470/660/860 | 205/280/480/680/880 | 205/320/530/730/940 | 228/340/550/760/920/ | 490/670/1030/1395/1760/860/1080/1520/1940/2375 | ||||
CD1 | Crane weight (KG) | 44/45/46/ | 121/125/130 | 137/145/172/188/204/220 | 221/232/285/309/332/353 | 281/297/354/390/420/451 | 437/495/597/646/686/726 | 1048/1098/1209/1301/1411/1130/1183/1286/1463/1563 | ||
/MD1 | 138/142/147 | 164/174/199/215/231/247 | 256/267/320/344/361/388 | 311/327/384/420/450/481 | 508/532/654/703/743/783 | 1104/1154/1265/1366/1467/1220/1273/1376/1553/1653 | ||||
CD1(FIXED) | 30/31/32 | 89/94/99 | 105/112/120/135159/165 | 166/179/186/209/229/249 | 222/236/250/284/312/340 | 377/400/415/456/493/529 | 795/841/943/1035/1127/850/903/1006/1183/1283 | |||
MD1(FIXED) | 106/111/116 | 132/140/147/162/177/192 | 201/211/221/244/264/284 | 252/266/280/314/342/370 | 430/457/472/513/549/586 | 851/897/999/1091/1183/949/997/1090/1273/1373 |
Installation method
Firstly, you need to install the chain box first.
Secondly, connect the power cord.
When connecting the power cord, must be cut off the power in advance.The ground line should be well grounded at same time, otherwise the operator may feel electric shock when touching any part of the gourd or chain.
Third, the load chain of Lubricated ring chain electric hoist
The lubrication degree of chain is an important factor affecting the service life of load chain.Timely and effective lubrication of load chain can guarantee the effective service life of the chain.
Fourth, check the chain alignment
For multi-chain ring chain electric hoist, should make sure that the hook rack is not flipped.If flipped, return it to normal and ensure that the chain is arranged in line.Do not hang the load on the chain's twisted gourd.
Finally, check the working voltage
Because of the link chain electric hoist out of the factory, they are made according to the user specified voltage or high voltage equipment (only for dual voltage), such as 230/460 v, the operator to check and confirm whether meet the requirements of power supply voltage.If not, please refer to the instructions to meet the required working voltage requirements.
- Q:A bucket in an old well is hoisted upward by a rope which winds up on a cylinder having a radius of .05 m.?
- finish the problem
- Q:Pad extensions may be needed when hoisting what type of vehicle? a Small cars b Pickup trucks c Vans d Either B or C Technician A says that a hoist can be stopped at any level as long as the safety latch engages. Technician B says that the vehicle should be hoisted to the top of the hoist travel for safety. Which technician is correct? a. Tech A only b.Tech B only c.Both techs A and B d.Neither tech A nor B Before lowering the vehicle, what should the technician do? a. Be sure nothing is underneath the vehicle b.Raise the vehicle enough to release the safety latch c.Be sure no one will be walking under or near the vehicle d.All of the above When checking for proper pad placement, how high should the vehicle be raised? a.About 2 inches (5 cm) b.About 6 inches (15 cm) c.About one foot (30 cm) d.About 3 feet (91 cm)
- Pad extensions may be needed when hoisting what type of vehicle? answer: D Technician A says that a hoist can be stopped at any level as long as the safety latch engages. Technician B says that the vehicle should be hoisted to the top of the hoist travel for safety. Which technician is correct? answer:C..both techs have valid points since tech b adds the words for safety. Before lowering the vehicle, what should the technician do? answer: D When checking for proper pad placement, how high should the vehicle be raised? answer: if one can't see while the car is over the hoist is on the ground and the pads are out how and where to properly place the pads to raise, the operator should turn the job over to a qualified hoist operator before someone gets hurt.
- Q:I think you have to jump on the gusteau sign and i can get onto the first hand and then his head in the middle but i cant seem to jump onto his other hand any ideas?
- You swipe his tail on the water faucet
- Q:I'm meaning for example why do some British people get upset when folks from the commonwealth want to move to Britain or some French people get upset etc..... after all the connection and the link is very much there?
- The whole idea of colonization was to get as much as possible from the colonized country. People from those countries, feeling a connection to the colonizing country, then return and make claims to be treated as citizens or equals to the colonizer, hence demanding that something (rights? opportunities? jobs? whatever) be given to them. Naturally this causes a problem for the colonizing country that was only interested in profit, not equality.
- Q:my direct lift pro-9d car hoist wont come all the way down. could it be due to the equalizing cables?
- try taking it up again...
- Q:I'm not sure what any of them mean,could someone post each of them in a simple sentence and the definition?The words are-convulsedconstituentshoisteddubiouscontortionmollifyI really need the help!
- This Site Might Help You. RE: Can someone put theses words in a sentence? I'm not sure what any of them mean,could someone post each of them in a simple sentence and the definition? The words are- convulsed constituents hoisted dubious contortion mollify I really need the help!
- Q:Can i use a 400lb engine hoist to remove a 350 engine?
- Not a problem unless the transmission is still attached.
- Q:would like to change out my powerstroke motor, i have a 7.3L and would like to put it in the place of the 6.0L, change them out.
- For less than four grand you can get ARP head bolts and studs and an EGR delete done at a shop, that should solve most the the typical 6L problems, rather than gambling on a whole new motor which you wont be able to tell if it was taken care of or beat to hell.
- Q:Can electric gourds make freight elevator?
- It depends on your relationship with the local quality and technical supervision bureau. I have installed several on the jiujiang river. It's still four floors, and it's controlled like an elevator. You can call, but you can't do it with two contacts. To realize the flat layer brake.
- Q:i think we are once again, the team to beat. Look out Hollywood Fakers
- the team to beat? celtics aint the defending champs... you think boston's top dog now just because they got a washed up rasheed wallace who gives up on his teammates and only launches 3's? the guy is not a threat homie hollwood fakers? okkkk i dont even need to say much to dog on massacusetts or however you spell that $hit hole state. learn how to talk
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
MD₁Electric Hoist,Electric Hoist, Hoist,General Electric Hoist
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 1000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords