Indoor Solar Collectors Non-Pressurized Heat Pipe Copper Solar Water Heater System
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Introduction of Non-Pressure Solar Water Heater:
Non-pressure Solar Heater is one of the most economical solar water heating device with pretty high efficiency at the same time. It consists of hot water storage tank, solar vacuum tubes with mouth plug in storage tank, and bracket supporting tank and tubes.When cold water in evacuated tubes is heated with solar irradiation, as the specific gravities of hot water and cold water are different, hotter water goes upward to storage tank and colder water goes downward to glass tubes. through this continuous circulation, the cold water in storage tank will be gradually heated till sunset.
Specialty:
1. High thermal performance and working temperature: the heat exchanging rate even in winter can up above 55%.
2. Heat collecting efficiency is at least 20% above common solar systems.
3. Work in all day and all season: no matter any corner of the world, this system can work well even -40℃ to avoid the tube freezing problem.
4. Reliability: No water following through the tube, so water scale can not generate and tube cracks could be avoided, the system still can keep working even with some damaged tubes.
5. It can connect with water tap and work automatically with pressure0.6Mpa, bring enjoyable washing experience.
6. Safety: P/T valve would release pressure and temperature to protect tank..
Technical Specification:
1. Outer tank material: SUS304 stainless steel or powder coated color steel
2. Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
3. Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
4. Frame material: 1.2mm thickness stainless steel
5. Insulation material: 55mm thickness polyurethane
6. Suitable for mains pressure water(up to 8 bar/116psi)
7. Easy plug-in installation
8. Install the T/P valve on the pressurized tank
9. Seal material: Stabilized High Temperature Silicon
Outer tank material: SUS304 stainless steel or powder coated color steel
Inner tank material: 1.2mm thick SUS304 food grade stainless steel ( Optional material SUS316L)
Vacuum tube material: borosilicate glass 3.3; AL-SS-CU absorb coating, with copper heat pipe inside
Frame material: 1.2mm thickness stainless steel
Insulation material: 55mm thickness polyurethane
Suitable for mains pressure water(up to 8 bar/116psi)
Easy plug-in installation
Install the T/P valve on the pressurized tank
Seal material: Stabilized High Temperature Silicon
19. Vacuum Tube | 20. Size (mm) | 21. Φ47*1500 / Φ58*1800 / Φ70*2100 | |||||
22. Tube (pcs) | 23. 10 / 12 / 15 / 18 / 20 / 22 / 24 / 30 / 36 / 42 | ||||||
24. Material | 25. Borosilicate 3.3 glass, magnetron spluttering selective coating | ||||||
26. Coating | 27. Single-target AL-N/AL or Three-target AL/N-Cu-SS | ||||||
28. Water Tank | 29. Capacity | 30. 80L ~ 500L for hot water storage tank | |||||
31. Inner tank | 32. Food-grade stainless steel SUS304-2B / SUS316 | ||||||
33. Insulation | 34. High-density polyurethane foam with 70~80 hour heat preservation | ||||||
35. Tank shell | 36. Food-grade stainless steel SUS304-2B | ||||||
37. Bracket | 38. Shaped strong aluminum alloy structure adaptable for flat or slope roof | ||||||
39. Accessories | 40. Anti-aging silicon seals, Dustproof seals, Air-vent cap, Stainless screws | ||||||
41. Auxiliary Devices | 42. Assistant tank, Intelligent controller, Electrical heater, Magnesium anodes | ||||||
43. Tilt Angle | 44. 25 ~ 50° | ||||||
45. Water Output | 46. 45 - 95°C | ||||||
47. Hail Resistance | 48. Φ25mm diameter | ||||||
49. Model Number | 50. Solar Vacuum Tube | 51. Tank 52. Liter | 53. System 54. Liter | 55. Container Loading Qty /sets | |||
56. Size /mm | 57. Qty /pcs | 58. 20GP | 59. 40GP | 60. 40HQ | |||
61. VNS-58SA12-100 | 62. Φ58*1800 | 63. 12 | 64. 100 | 65. 132 | 66. 58 | 67. 119 | 68. 140 |
69. VNS-58SA15-130 | 70. 15 | 71. 130 | 72. 170 | 73. 54 | 74. 108 | 75. 131 | |
76. VNS-58SA18-150 | 77. 18 | 78. 150 | 79. 198 | 80. 43 | 81. 86 | 82. 105 | |
83. VNS-58SA20-170 | 84. 20 | 85. 170 | 86. 223 | 87. 40 | 88. 80 | 89. 97 | |
VNS-58SA24-200 | 24 | 200 | 263 | 35 | 70 | 85 | |
VNS-58SA30-250 | 30 | 250 | 329 | 28 | 56 | 68 | |
VNS-58SA36-300 | 36 | 300 | 395 | 23 | 47 | 57 | |
Product Show
Our Services
1. OEM service
2. Warranty: 5 years
3. Considerable after sale service
Color steel Compact pressure Thermal solar heater
FAQ:
1. What’s the delivery time?
10 days after receiving deposit.
2. How long is the warranty?
5 years for whole system, 1 year for accessory
3. What’s your production capacity?
6000sets/month
4. What’s the MOQ?
1 set.
5. What’s your payment term?
Container: 30% T/T in advance for deposit, 70% T/T before shipment for fist order.
70% T/T after seeing copy of B/L from second order
Sample: 100% T/T in advance
Other choices: L/C at sight.
6. What certifications do you have?
CE, SOLAR KEYMARK, SRCC and etc.
- Q: What is the maximum temperature a solar collector can reach?
- The maximum temperature a solar collector can reach depends on various factors such as the type of collector, design, materials used, and weather conditions. However, in general, solar collectors can reach temperatures of up to 200-300 degrees Celsius (392-572 degrees Fahrenheit).
- Q: Flat solar collector is a good blue film, or good black chrome? It is best to specify.
- The absorption ratio α and the emission ratio ε of the black chromium coating are 0.93-0.97 and 0.07-0.15, respectively, and α / ε is 6 to 13, and has excellent spectral selectivity.
- Q: Can solar collectors be used for heating sports facilities?
- Yes, solar collectors can be used for heating sports facilities. Solar thermal systems can efficiently capture solar energy and convert it into heat, which can then be used to warm up the interior spaces of sports facilities. This can help reduce the reliance on traditional heating methods and lower energy costs, making it an environmentally friendly and cost-effective solution for heating sports facilities.
- Q: How much do solar collectors cost?
- The cost of solar collectors can vary depending on factors such as size, type, and installation requirements. On average, residential solar collectors can range from $2,000 to $10,000, while larger commercial or industrial systems can cost tens or even hundreds of thousands of dollars. It is recommended to obtain quotes from reputable suppliers or consult with solar professionals for accurate pricing information based on specific needs and location.
- Q: What is the impact of shading on solar collector performance?
- Shading can significantly impact the performance of solar collectors. When a solar collector is shaded, it receives less sunlight, reducing its ability to generate electricity or heat. Shading can decrease the overall efficiency of the system, resulting in lower energy production and potentially reducing the economic viability of the installation. Therefore, it is crucial to carefully consider the shading conditions and design solar collector systems to minimize shading and maximize their efficiency and output.
- Q: Can solar collectors be used in cold storage facilities?
- Yes, solar collectors can be used in cold storage facilities. Solar collectors are devices that capture sunlight and convert it into heat energy. This heat energy can be utilized to provide heating and hot water for various applications, including cold storage facilities. In cold storage facilities, maintaining a consistent temperature is crucial for preserving perishable goods. Traditionally, this is achieved using conventional heating systems that consume fossil fuels. However, solar collectors offer a sustainable and cost-effective alternative. Solar thermal collectors can generate heat energy even in cold weather conditions. These collectors absorb sunlight and convert it into thermal energy, which can be used to heat the air or water in the storage facility. This can help maintain the desired temperature or even provide additional heating during colder periods. There are different types of solar collectors that can be used in cold storage facilities. Flat-plate collectors are the most common and consist of a dark absorbent plate covered with a transparent cover to trap heat. Evacuated tube collectors are another option, which consist of multiple glass tubes that trap solar energy and minimize heat loss. By using solar collectors in cold storage facilities, businesses can reduce their reliance on fossil fuels, lower their energy costs, and decrease their carbon footprint. Additionally, solar energy is a renewable resource, making it a sustainable choice for long-term energy needs. It is important to note that the effectiveness of solar collectors in cold storage facilities will depend on various factors such as the location, climate, size of the facility, and the specific requirements for temperature control. Proper design, sizing, and integration of solar collectors with existing heating systems are necessary to ensure optimal performance and efficiency.
- Q: Can solar collectors be used for water desalination?
- Yes, solar collectors can be used for water desalination. Solar energy can be harnessed to power the desalination process, typically through the use of solar stills or solar-powered reverse osmosis systems. These systems utilize solar collectors to heat water and generate steam, which is then condensed to produce fresh water while leaving behind the salt and other impurities. Solar-powered desalination is an environmentally friendly and sustainable solution to address water scarcity in areas with access to ample sunlight.
- Q: Can solar collectors be used for heating rehabilitation centers?
- Yes, solar collectors can be used for heating rehabilitation centers. Solar thermal systems can provide a reliable and sustainable source of heat energy for such facilities, reducing dependence on traditional fossil fuel-based heating systems. This can help in achieving energy efficiency, cost savings, and environmental benefits for rehabilitation centers.
- Q: Can solar collectors be used for generating electricity on lakes?
- Yes, solar collectors can be used for generating electricity on lakes. Floating solar panels or solar farms can be installed on the surface of lakes to harness sunlight and convert it into electricity through photovoltaic technology. This method of generating electricity is known as floating solar or floating photovoltaic (FPV) technology. It offers several advantages such as maximizing land use efficiency, reducing evaporation from the water surface, and potentially reducing algae growth.
- Q: Can solar collectors be used in airplanes?
- Yes, solar collectors can be used in airplanes. In fact, some aircraft have already adopted solar technology to power auxiliary systems or assist in propulsion. Solar panels installed on the surface of an aircraft can harness sunlight to generate electricity, reducing reliance on traditional fuel sources and enhancing energy efficiency. However, due to the limitations of current solar technology, it is not yet viable to solely rely on solar collectors for all aircraft power needs.
Send your message to us
Indoor Solar Collectors Non-Pressurized Heat Pipe Copper Solar Water Heater System
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 6000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
