Hp 400mm Graphite Electrodes - Gextruded Graphite Rod/Hpraphite Electrode/Synthetic Graphite Rod Blank Dia 90mm
- Ref Price:
-
$9.88
/ m²
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 1000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Description:
Graphite electrode is made from the domestic first petroleum coke and high quality needle coke and widely used in the electric arc furnaces for production of alloy steels, metal and other nonmetallic materials, etc. The graphite electrodes include regular power, high power, super high power, ultra high power and square electrode. The range of diameters covers from 200mm to 700mm. Our products own the following characteristics: low electric resistance, good electric and thermal conductivity, high oxidation resistance, greater resistance to thermal and mechanicalshock, high mechanical strength, high machining accuracy.
Graphite Electrodes Features:
RP HP UHP Graphite Electrode
1.Dia:40-600mm or1.6"-24"
2.Length:250-2400mm or10"-96"
3.Nipples:3TPI,4TPI
4.ISO9001:2008
Graphite Electrodes Application:
Used in EAF and LF for steel making, as well as in electric smelting furnace for producing industrial silicon, phosphorus, etc.
Graphite Electrodes Specifications
1.Good electrical conductivity
2.High resistance to thermal shock
3.High mechanical strength
Grades:RP, RPI, HP, SHP, UHP
All graphite electrodes are offered with tapered nipples, i.e. 3 or 4 threads per inch, and meet the internationally accepted tolerances as per NEMA CG 1/ IEC 60239 / JIS R7201 standards.
Technical data:
Note: The consumption of Electric Arc Furnace(EAF) is about 3-5kg per ton steel. The Ladle Furnace(LF) is about 1kg per ton steel. The converter with Ladle Furnace(LF) is about 0.5kg per ton steel. All the information is for your reference. There are many factors can influence the consumption, such as the kinds of steel, conduction time, process production and so on. So if you have any question, please don’t hesitate to contact us.
FAQs:
Q1 What’s the transport method?
A1 FCL delivery goods with wooden pallet; If LCL delivery, must with wooden case; Sometimes need open top, flat rack or bulk cargo.
Q2 What’s the required payment term?
A2 Generally 30% TT as the prepayment, 70% TT before delivery. If need, 100% Irrevocable Letter of Credit or negotiation.
Q3 Which country are our products exported to?
A3 Apart from entire Chinese market, the US, Russia, Japan, Korea, Australia and some Southeast Asian Nations.
- Q: Thermal expansion coefficient of graphite
- Thermal expansion coefficient (100 degrees Celsius --600 degrees Celsius) diameter 200--500 graphite electrode body is not greater than 2.410 of the negative four times per degree Celsius
- Q: How long is the graphite electrode machining cycle?
- The dust produced in the processing of graphite electrode is relatively large, the possible intrusion to the machine tool guide screw and spindle, which requires a corresponding machining device of graphite graphite dust machine, sealing better, because the graphite toxic.
- Q: Are graphite and carbon electrodes the same? What kinds of ore furnaces are used?
- Graphite electrode should be relatively pure, composed of graphite.
- Q: Why is the production of one ton of ultra high power graphite electrode requires 1.05 tons of coke?
- After calcined to eliminate ash and volatile part of the points in this process will be a lot of weight loss, in the process of crushing mixing in process of baking or graphite in high temperature heat treatment, another part of the impurities were excluded, so the raw material is higher than the rate of finished products.
- Q: Graphite graphite graphite graphite electrode what is the use?
- Electrode graphite powder that can be used for the production of electrodes, because the conductive properties of graphite electrode, so that the electrode graphite powder can become conductive graphite powder, graphite powder can also be applied to the field of conductive or conductive composite materials production.
- Q: What are the losses in graphite electrode?
- So tell, this problem is to answer a lot, graphite under high temperature oxidation, generally around 400 degrees, began a slight oxidation, but the human eye is to be observed, with the increase of temperature, the graphite oxide will increase, this time should be used to protect gas or vacuum to protect what you said is, nitrogen protection, and general protection of nitrogen can reach more than 2000 degrees, if the high temperature to 3800 degrees, will you say that vapor formed in graphite surface. To achieve this temperature, it is necessary to add inert gas to achieve, otherwise, can not reach, generally to 4350 degrees, the graphite began to soften.
- Q: What kinds of carbon are there?
- Carbon products by product use can be divided into graphite electrode, carbon block, graphite anode, carbon materials, carbon electrode, carbon paste, electric, carbon fiber, special graphite, graphite heat exchanger etc..
- Q: What do carbon products include?
- Carbon and graphite materials are mainly carbon based non-metallic solid materials, in which carbon material is basically composed of non graphitic carbon material, and graphite material is basically composed of graphite carbon material. For the sake of simplicity, carbon and graphite materials are sometimes referred to as carbon materials (or carbon materials).
- Q: Electrolysis of CuCl2 solutions with graphite electrodes
- After energization, electrolysis occurs, not ionizationIonization does not require energization, and can occur in aqueous or molten state.
- Q: Graphitized anode, cathode and graphite electrode, respectively How can one differentiate and use differently?
- In electrolysis industry, using graphite anode plate as the anode has a history of more than 100 years, the metal anode is in recent decades, the research and application of metal anode in China late last century, only in 70s the technology related to the research and experiment of metal anode, anode on electrolysis industry, mainly through the silver (2%) (0.5%): low silver lead silver alloy, lead and silver tin antimony alloy, lead calcium alloy and lead silver alloy adding nucleating agents and several stages
Send your message to us
Hp 400mm Graphite Electrodes - Gextruded Graphite Rod/Hpraphite Electrode/Synthetic Graphite Rod Blank Dia 90mm
- Ref Price:
-
$9.88
/ m²
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 1 m²
- Supply Capability:
- 1000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
