Home Storage All in one Battery with IP65 VPP and IOT JX Good Quanlity
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 pc
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Specification
Absolute max Voltage (dc.V):
600V
No.of Strings per MPP Tracker:
1
No.of MPP Trackers:
2
Max DC input Voltage(W):
4800W
Home Storage All in one Battery with IP65 VPP and IOT JX
| Model | WH-SPHA3.6H-5.12kwhWH-SPHA3.6H-10.24kWh | WH-SPHA4.6H-5.12kwhWH-SPHA4.6H-10.24kWh | WH-SPHA5.0H-5.12kwhWH-SPHA5.0H-10.24kWh | WH-SPHA6.0H-5.12kwhWH-SPHA6.0H-10.24kWh |
| Absolute Max Voltage(d.c.V) | 600 | |||
| MPPT Voltage Range(d.c.V) | 100-500 | |||
| Max.DC Input Power(w) | 4800 | 6200 | 6650 | 8000 |
| Start-up Voltage(d.c.V) | 90 | |||
| Rated Operating Voltage(d.c.V) | 360 | |||
| Max.Input Current(d.c.A) | 12.5/12.5 | |||
| Max.inverter backfeed current to array(d.c.A) | 0 | |||
| Isc PV(d.c.A) | 18 | |||
| No.of MPP Trackers | 2 | |||
| No.of Strings per MPP Tracker | 1 | |||
| Battery Model | WH-BXB5.12 | WH-BXB10.24 | ||
| Battery Capacity | 5.12kWh | 10.24kWh | ||
| Nominal Battery Voltage(dc.V) | 204.8 | 409.6 | ||
| Battery Voltage Range(dc.V) | 160-227.2 | 320-454.4 | ||
| Max.Charge/Discharge Current(dc.A) | 25/25 | |||
| Cycling times | 6500 | |||
| Depth of Discharge(%) | 90 | |||
| AC Input/Output | ||||
| Rated output power(W) | 3600 | 4600 | 5000 | 6000 |
| Rated Apparent Power to Grid(VA) | 3600 | 4600 | 5000 | 6000 |
| Max.Apparent Power to Grid(VA) | 3600 | 4600 | 5000 | 6000 |
| Max.Apparent Power from Grid(VA) | 7200 | 9200 | 10000 | 12000 |
| Rated Voltage(ac.V) | 220/230/240 | |||
| Rated Frequency(Hz) | 50/60 | |||
| Rated AC Current to Grid(acA) | 15.6 | 20 | 21.7 | 26.1 |
| Max.output current(ac.A) | 17.2 | 22 | 23.9 | 28.7 |
| Max.Current from Grid(ac.A) | 31.2 | 40 | 43.4 | 52.2 |
| Inrush current(acA) | 16 a.c.A (peak), 11.3 us (duration) | |||
| Max.output fault current(ac.A) | 57 (peak), 40 (rms) | |||
| AC output Maximum output overcurrent protection(ac.A) | 40 | |||
| AC input power factor | -0.8~+0.8 | |||
| AC output power factor | 1 (-0.8...+0.8 adjustable) | |||
| THDi | <3%< td=""> | |||
| EPS Output | ||||
| Max.output power(W) | 3600 | 4600 | 5000 | 6000 |
| Rated Apparent Power(VA) | 4320 | 5520 | 6000 | 7200 |
| Max.Apparent Power(VA) | 4320 | 5520 | 6000 | 7200 |
| Rated Voltage(ac.V) | 230 (±2%) | |||
| Nominal Frequency(Hz) | 50/60 (±0.2%) | |||
| Max.Output Current(ac.A） | 18.8 | 24 | 26.1 | 31.3 |
| Inrush Current(ac.A） | 16 a.c.A (peak), 11.3 us (duration) | |||
| Max.output fault current(ac.A） | 57 (peak), 40 (rms) | |||
| EPS output Maximum output overcurrent protection（ac.A) | 40 | |||
| Switch time(ms) | <10< td=""> | |||
| THDv@Linear Load (%) | <2< td=""> | |||
| Power Factor | -0.8~+0.8 | |||
| Efficiency | ||||
| PV Max.Efficiency(%) | 97.6 | |||
| PV Europe Efficiency(%) | 97 | |||
| PV Max.MPPT Efficiency(%) | 99.9 | |||
| Battery Charge by PV Max.Efficiency(%) | 98 | |||
| Battery Discharge Efficiency(%) | 96.7 | |||
| Protection | ||||
| Over/Under voltage protection | Yes | |||
| DC isolation protection | Yes | |||
| DC injection monitoring | Yes | |||
| Residual current detection | Yes | |||
| Anti-islanding protection | Yes | |||
| Over load protection | Yes | |||
| Battery Input reverse polarity protection | Yes | |||
| PV reverse polarity protection | Yes | |||
| Surge protection | Yes | |||
| Over heat protection | Yes | |||
| General Data | WH-BXB5.12 | WH-BXB10.24 | ||
| Dimension(W/D/H)(mm) | 550 × 233 × 1125mm | 550 × 233 × 1750mm | ||
| Dimension of packing(W/D/H)(mm) | 655 × 302 × 1390mm | 655 × 302 × 2085mm | ||
| Net weight(kg) | 68 | |||
| Gross weight(kg) | 78 | |||
| Operation Temp(°) | -10~+55 | |||
| Relative Humidity(%) | 0~95 | |||
| Altitude(m) | ≤3000 | |||
| Ingress Protection | IP65 | |||
| Cooling | Natural | |||
| Inverter Topology | Non-isolated | |||
| Over Voltage category | Ⅲ(AC), Ⅱ(DC) | |||
| Protection class | ClassⅠ | |||
| Active anti-islanding method | frequency shift | |||
| Human Interface | LED/APP | |||
| BMS Communication Interface | RS485/CAN | |||
| Meter Communication Interface | RS485 | |||
| Noise Emission(dB) | <25< span=""> | |||
| Stand by Power Consumption(w) | <5 | |||
| Safety and Approvals | ||||
| Safety | IEC62040.1:2019 IEC 62109-1&-2 IEC62619 UN38.3 IEC60730-1 EN IEC 61000-6-2:2019 EN IEC 61000-6-3:2021 | |||
| Country | AS/NZS 4777.2:2020 VDE-AR-N 4105:2018-11 MEA:2015 PEA:2016 EN 50549-2:2019 EN 50549-1+Poland deviation G99/1-6:2020 G98/1-6:2021 RD1699+UNE Distribution Code VDE0126+UTE C10/11: 2021 | |||
Product Introduction of Home Storage All in one Battery with IP65 VPP and IOT JX
Agave-SH, a hybrid all-in-one BESS, compatible with high voltage LFP battery system, can achieve the best function to maximize clean solar power usage for your home.
Convenient: Battery pre-installed
Quiet: Less than 25dB, no noise pollution
Flexible: IP65 Inverter up to 6KW, battery capacity up to 10KWh
Adaptative: Self-power, backup, and load shifting modes
Independent: No additional modules and inverters are required
Smart: Support VPP and IOT
Application Scenario of Home Storage All in one Battery with IP65 VPP and IOT JX
Certificates:
Our company
- Q: How is the capacity of the battery defined?
- General circuit has a battery protection circuit, once the battery voltage is less than 10.8V will automatically cut off the electricity to prevent the battery because of over-discharge and damage. (Nominal value of 12V battery internal six cell grid) with the battery discharge current multiplied by the discharge time to express how much energy the battery can store, is a very image of a measure. The greater the value of the battery, indicating that the battery can store more energy. But does not mean that the battery can use such a large current discharge.
- Q: What are the technical parameters of the battery?
- Battery capacity is defined as ∫ t0tdt, theoretically t can be infinite, but in fact when the battery discharge is lower than the termination voltage continues to discharge, which may damage the battery, so t value is limited, the battery industry, in hours (h) Battery sustainable discharge time, feel the C24, C20, C10, C8, C3, C1 and other nominal capacity value.
- Q: How to determine the battery is good or bad?
- Observe the battery electrolyte is turbid, turbidity that the battery positive plate softening. Observe the bottom of the battery whether there is sediment, if the plate off the battery capacity has been inadequate. Hand hit the battery two electrode piles If you hear an empty voice that pole pile and plate break. With a thick wire short-circuit positive and negative pile observation of the battery filling holes, such as the discovery of a bubble appears that the interval has been damaged.
- Q: Maintenance-free battery how to detect it?
- Keep the battery surface clean. If the discovery of solid oxide on the pole, it should be timely with hot water pouring, to be removed, so as not to affect the pole and the terminal between the continuity. After cleaning up, wipe the battery surface, in the pole and the terminal cast on the butter to ensure that the pole is not oxidized.
- Q: What battery does the van use?
- The most obvious feature of lead-acid batteries is the top of the plastic cover can be unscrewed, there are ventilation holes above. These fillers are used to fill pure water, check the electrolyte and the use of exhaust gas. In theory, lead-acid batteries need to check the density of each electrolyte and the level of liquid, if there is a need to add distilled water. But with the upgrading of battery manufacturing technology, lead-acid battery development for the lead-acid maintenance-free batteries and colloidal maintenance-free batteries, lead-acid batteries do not need to add electrolyte or distilled water. Mainly the use of positive electrode to produce oxygen can be absorbed in the negative oxygen cycle, to prevent water reduction. Lead-acid water batteries are mostly used in tractors, tricycles, car start, etc., and maintenance-free lead-acid battery wider range of applications, including uninterruptible power supply, electric vehicle power, electric bicycle batteries. Lead-acid batteries according to the application needs to be divided into constant current discharge (such as uninterruptible power supply) and instantaneous discharge (such as car to start the battery).
- Q: What is the meaning of the battery above 12v65Ah?
- 12V represents the rated voltage. 65Ah indicates that the battery capacity (ie 1 ampere current can be used for 65 hours).
- Q: How should the battery be well maintained?
- Electrolyte density This is to evaluate whether the battery charge is normal, whether the aging of the important parameters, the use of density meter or electrolyte density tester can be measured. If the electrolyte density is too small, you need to charge. And the electrolyte concentration is too thick or too thin to a certain extent, it means that such as the occurrence of plate vulcanization, short circuit or overcharge phenomenon, this time on the need for maintenance.
- Q: 80ah how much battery storage capacity?
- The size of the battery storage power refers to the battery capacity. Battery capacity is generally calculated in AH (safety). You 80Ah battery capacity is 80Ah, meaning that if you discharge current to 80A, you can put an hour.
- Q: Battery 200ah / 104 what does that mean?
- This should be refers to 2V200AH battery 104, power with the 220V. Lead-acid battery nominal voltage is 2V / (each or monomer), but in fact will be higher than 2V, so the actual use and charging equipment for the matching will use 104, also useful 103, also useful 108 Only.
- Q: How does battery activation work?
- If you are talking about dry batteries, that is, to add sulfuric acid can use the battery (commonly known as water bottles), then it is because the long-term storage so that a high degree of oxidation of the negative board, plus acid will be a high temperature, Low, you can add acid in the pool after the addition of a small current for a long time to charge, you can solve. Generally with 0.05C charge to 3 times can be.
Send your message to us
Home Storage All in one Battery with IP65 VPP and IOT JX Good Quanlity
- Ref Price:
-
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 50 pc
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
