High Quality Composite FRP Tanks and Vessels with High Mechanical Inertness
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 23 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
INSTRUCTION
FRP tanks and vessels can be largely used in many areas of the light industry, petroleum, chemical, food brewing, transportation and so on. Such product can resist the corrosion of various acids, alkalis and salts.
CHARACTERISTICS
• High mechanical strength
• High mechanical inertness
• Resistance to weathering
• Low thermal and electrical conductivity
• Long Life
• Non-toxicity
• No need for maintenance
• Light weight
DESIGN PHILOSOPHY
The correct structuring of any kind of G.R.P. tank consist of three distinct types of layers:
• Chemical Resistant Layer
• Mechanically Resistant Layer
• Outer Protective Layer
OTHER DESIGN CONDITIONS
• Working pressure, Vacuum
• Support span
• Working temperature
FRP small-scale storage tank: Diameter ≤ 4M
Large-scale jobsite winding vertical storage tank: Diameter 4200mm-25000mm
EXECUTIVE STANDARD
FRP small-scale storage tank
JC/T587-1995 (Glass fiber reinforced plastic storage tank)
Large-scale storage tank
HG/T3983-2007 Industry standards of Chemical Corrosion-resistant jobsite Winding FRP Large-scale storage tank
HG/T20696 Design Requirements of FRP Chemical Equipment
COMPANY INTRODUCTION
CNBM, China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china building materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies
.
CNBM International Corporation is one subsidiary of CNBM, we focus on offering good-quality products, professional service and complete solution to our customers. Strong delivery capacity, advanced technology
& management, strong financing capability and excellent after-sale service are our advantages in sharing international market.
PICTURE S
- Q: What are the manufacturing processes of FRP tanks?
- The lining has the skeleton and the airtight function, is a part of the finished product. When designing the lining, pay attention to the sufficient strength and rigidity. The thickness of the inner layer is more than 3mm (see Table 1), and the resin content is greater than 80%. The corrosion resistant surface felt, short cut felt and cloth handle paste can be used for making the inner layer. Its production process is roughly as follows: mold making, mold, tank head hand paste glass fiber products, after curing, stripping adhesive, bonding head, air nozzle test, grinding, repairing, too. For the qualified lining lining molding, using two type sealing and simplified one and head connecting two. Thus, it is easier to produce a qualified lining and increase productivity than a three end combination of a sealed tail, a simplified type and a head. The key to making the qualified lining is the connection between the head and the cylinder. The head and the cylinder should be made of socket joint, because the plug joint has the advantages of high strength of joint, good performance of internal pressure, uneasy leakage and convenient assembly. As long as the socket structure is reasonable, it will not leak after use. The bonding joint depends on the resin cement and the outer FRP reinforcement. Wherein, the daub is applied between the socket and the socket and plays the first line of defense. It is made up of resin and filler, and resin has the function of adhesion and seepage prevention. It requires good toughness and higher adhesion, so epoxy resin should be used as daub. After the first line of defense, the seepage prevention mainly depends on the FRP reinforced layer. The layer consists of fiberglass products and resins. Among them, glass fiber products such as blankets and cloth between the fiber gap, can not be impermeable, can only play a strengthening role.
- Q: What type of resin is used in FRP tanks for electroplating waste water?
- At present commonly used are: latitude 901, Jinling DSM A430, Chang MF - 1 vinyl resin or epoxy resin.
- Q: How long is the normal service life of FRP cans? How long will it take if I use it in harsh conditions?
- The quality of the resin will directly affect the service life of your product, and the specific environmental factors need to be analyzed in detail. Suggest you contact specific supplier, put forward your requirement, just can provide the product that you need according to your requirement
- Q: Physical properties of FRP tanks
- Good corrosion resistanceFRP is a good corrosion resistant material. It has more resistance to atmosphere, water and acid, alkali, salt, and various kinds of oils and solvents. Has been applied to all aspects of chemical corrosion, is replacing carbon steel, stainless steel, wood, nonferrous metals and so on.
- Q: There is a storage tank, which was originally village glue, and now prepared to glue on the basis of the village glass fiber reinforced plastic anti-corrosion, can?
- No, it is decided by the characteristic of FRP. It can not stick.
- Q: What material for liquid storage tank
- Liquid tank liquid alkali storage tank according to the types of polyethylene material storage tank, steel lined with polyethylene material tank two series.
- Q: Glass fibre reinforced plastic water storage tank
- The solidification of glass fiber reinforced plastics can raise the strength of 10% or more. Vacuum curing is one of the effective ways to improve the strength of FRP products. In the manufacturing process, there are still some residual solvents and other low molecular substances, which can not be completely removed at atmospheric pressure.
- Q: Is glass steel transparent? Transparent and opaque glass steel have?
- There are mainly in accordance with customer requirements, my family is now producing transparent glass steel tile, transparency can reach 90% - 95%.
- Q: The thickness of the coating of glass steel tank initiations how detection
- During the test, a distance not less than 20mm the measured point edge or corner of the inner member. The probe shall be in vertical contact with the surface of the measuring point. The contact time should be kept from 1s to 2S, and the measured values displayed by the instrument shall be read and printed or recorded.
- Q: Glass steel anti-corrosion tank glass steel coating thickness to detect initiation
- Probe to choose in the more smooth place, but also smear some oil, similar to the hospital to do B ultrasound. There is no data across the air.
Send your message to us
High Quality Composite FRP Tanks and Vessels with High Mechanical Inertness
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 23 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
