High Quality 5050 SMD LED Cool White From China Professional Manufacture
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Quality 5050 Smd led Cool White in professional manufacture
Specification
chip material | INGaN/GaAsp |
chip brand | cree,bridgelux,epistar |
available power | 1w,2w,3w,5w,10w,15w,18w,20w,30w,50w,80w,100w,200w,300w,500w |
viewing angle | 60degree,120degree,140degree,175degree |
color | red,blue,green,yellow,orangle,bi-color,RGB |
white color temperature | 2700-3500k,5500-6500k.7000-8000k |
products strength | high bright,low power consumption,good quality, |
factory strength | automatic equipments,professional engineer,prompt delivery time best service, |
Main Features
1. LED Sources: 5050SMD LED
2. Colors: white, warm white, red, green, yellow, purple and pink are both available.
3. Viewing angle: 120 degrees
4. LED Quantity: 60pcs LEDs per meter
5. Working Voltage: 5V
6. Power Consumption: less than 4.8 W per meter
7. can be altered by cutting at the detaching point in groups of 3 LEDs each. Length of the shortest functionable unit detachable is 50mm
8. Waterproof(IP67 or IP65) or nonwaterproof are both available
Packaging & Shipping
Packing:
Inner package:anti-plastic bags or in tapes. Outer package:in cartons
Delivery time:
>Sample: 1-3 days.
>Normal order: 4-7days
Payment terms:
T/T, L/C
Other Remarks
1. Do not touch the surface of the led, in case to influence the normal emitting.
2. Make sure the right positive and negative pole.
3. Reference voltage is 6.5V, Voltage range is 0~10V, higher voltage would destroy the device
4. Do not watch closely, it is harmful to your eyes.
About Us
Our company specialized in manufacturing LED, with the capacity of researching ,manufacturing and selling. The factory is equipped with advanced equipments, professional technicians and highly qualified management team, with the principle of survive by quality, develop by technology ,oriented by the market and aim at service, providing high-quality productions and services.
- Q: What is the principle used in SMD LED lamp, should pay attention to what the problem?
- LED installation method 1, don't install the LED pin in 2, under the condition of deformation in printed circuit board when installing LED, circuit board hole center distance and LED pin center spacing should be the same, if the hole spacing will make the lamp feet have residual stress and welding...
- Q: How can I install the patch LED lamp belt on the wood chip casting board? With double-sided glue will be hot, and can not use the clip on the screw, what should I do?
- With double-sided adhesive, the temperature will not be very high. So it won't fall either. That's how I got it. It took me more than half a year, and I didn't have any problems
- Q: LED light SMD LED package in what form, trouble you under the guidance of...
- Draw your own line, mm is replaced by mil on the line, with vernier caliper measurement, or know the model, count the number of mil. For example, 5050 is a close square with a width of 5.0mm*5.0mmInline LED (such as straw hat lights, 5mm), piranha LED, surface mount LEDSinglechip collection from hardware to software chm
- Q: What, in what way do I shunt the LED?
- In series, the voltage is 20 times the rated voltage, in parallel, the voltage is rated voltage, but in tandem, a LED is broken, it is not bright, so it is recommended not to use it.
- Q: What is patch SMD-LED?
- SMD LED is the surface mount light emitting diode. It is a solid state semiconductor device that converts electricity directly into light. The heart of LED is a semiconductor wafer, one end of which is attached to a bracket, one end is negative, and the other is connected to the positive electrode of the power to encapsulate the entire wafer with epoxy resin.
- Q: Is the forward voltage drop of the patch LED too large or too small?
- If you have to be good or bad, then I can say "small" to you,Some clients have strict requirements for this
- Q: What is the difference between patch LED beads and LED beads: General
- Patch is a LED lamp, 0805, SMD beads 3014, 3528, 2835, 5050, 5630, 5730 and so on.
- Q: Which is good for LED patch and LED bulb?
- The LED patch is the same as the LED bulbLED (light emitting diode) patch (package)The LED patch (SMD) is made of FPC circuit board, LED and high quality silica gel sleeve. Waterproof performance, using low voltage DC power supply is safe and convenient, light colors, bright colors; outdoor use can be anti UV aging, yellowing, high temperature resistance and other advantages, the products are widely used in building lights, decorative lighting, advertising and entertainment quasi decorative lighting lighting field.LED bulbWith the LED patch or LED plug-in LED (light emitting diode), series or parallel, driving power supply, making a combined shell lampshade capable of converting electrical energy into visible solid semiconductor devices, which can be directly converted into electricity to light.
- Q: LED patches have several ways of welding. Which ones can be reflow? What can be done by eutectic welding? Is the welding of viscose and lens material is required?
- Chip and stent welding methods are: eutectic welding, silver glue fixed, resin insulation and fixed silicone rubber insulation fixedWelding beads: reflow soldering, hot plate welding and manual soldering.
- Q: Patch LED light broken one, short circuit can use it?
- Only when a constant current source is used, the LED in series can be shorted. For the shunt power supply shunt LED, the open circuit LED can be disabled without having to manage it. The short circuit must be removed
Send your message to us
High Quality 5050 SMD LED Cool White From China Professional Manufacture
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1000 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches