High Pressure Fuel Hose for Automative Reinforced One Layer
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 300000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
Place of Origin: | Hebei China (Mainland) | Brand Name: | PASSION Fuel Hose | Model Number: | ID 1/4'' Fuel Hose |
Fuel Hose Raw Material: | High quality NBR | Inner diameter: | 8mm+/-0.3mm | Thickness: | 3.5mm |
Outer diameter: | 15mm+/-0.5mm | Application: | For the transfer of unleaded, leaded, diesel & E10 fuels. | Properties: | flexibility, good aging resistance |
Coil length: | 50m or 100m etc | Temperature: | -30degree to +100degree | Color: | Black, Blue, Red etc |
Main Market: | European and America |
Packaging & Delivery
Packaging Details: | Well packed by OPP film. we can customize the packing as your request |
Delivery Detail: | Within 30 days for full container after order confirmed |
Paishun Rubber Fuel Hose is one of our main products with 8 years manufacturing experience. We currently export to Europe, American and Australia. it is applied to circulating oil media with fuel circuit in the internal-combustion engine, etc. or petroleum products with the contents of aromatic subsances not more than 50%.
Inner Tube: Smooth black fuel resistant nitrile synthetic rubber
Outer Tube: Smooth black ozone and abrasion resistant synthetic rubber
Reinforced layer: High strength polyester braided
Specification of Fuel Hose
Name
1inch heat resistant rubber hose in factory price
Inner tube
Oil resistant synthetic rubber
Reinforcement
One high tensile steel wire spirals
Cover
Abrasion and weather resistant synthetic rubber
Color
Black/ according to customer's request
Applicable standard
SAE
Hose process
Steel wire braid
Print words
According to customer’s request
Application
Used for petroleum/water/based on hydraulic fluids.
Packing
Woven bag packing or according to customer's request.
Delivery time
15-20 days after receiving your balance payment
Business model
Factory
Tube High oil/ fuel/ gasoline/petrol /hydraulic fluid resistance performance synthetic rubber
Reinforcement One or two high tensile synthetic yarn braids reinforcement or steel wire reinforcement
Cover Weather protective, heat and oil resistant synthetic rubber. (corrugated finishing)
Temperature -30C to 120C
Size 3/16''~5''
Roll 50~100meter
Color Black, Red, Green, Blue, Yellow, Grey
Surface Cloth surface or smooth surface
Application Variety of application for delivery of gasoline,kerosene,diesel oil,lubricating and other mineral oil.
Sample Free
MOQ 100 meter
Printing word "XFY" or according to your demand
Business type Manufacture
Certification UL330, ISO9001:2008
Package Packaged by plastic woven bag or carton
Delivery date Within 2 weeks or according to the quantity
FAQ
1.Q:Are you a factory or trading company?
A:We are a factory
2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in Hebei China.All our clients, from home or abroad, are warmly welcome to visit us!
3.Q:How can I get some samples?
A: We are honored to offer you samples.
4.Q:How does your factory do regarding quality control?
A. Quality is priority. PASSION people always attach great importance to quality controlling from the very beginning to the very end. Our factory has gained CE, ISO, SGS, TUV etc. Authentication.
- Q: Do I need a shim for the flat metal hose joint?
- If one of the two interconnected joints is one of those with a groove and a O ring, it would be better to put the O ring in it and seal it better.
- Q: How can the rubber joint be classified according to the range of temperature?
- A universal rubber flexible joint is suitable for use in water from -15 DEG C to 80 DEG C or in a variety of acid and alkaline solutions with concentrations below 10%.
- Q: The rubber is sheathed on a metal cylinder. How should they be connected?
- If you describe it, it is recommended that a soft binder such as 704 silicone gel will be used to prevent shock absorption and separation. Metal surface to rust treatment, clean can be coated adhesive, rubber cover surface is best polished, degreasing treatment effect is good!
- Q: What does rubber soft joint "KDTF" mean?
- It is a kind of pipe joint with high elasticity, high air tightness, medium resistance and weather resistance. The main outer layer, inner layer, intermediate layer reinforced polyester cord fabric, steel wire pressure protection layer.
- Q: Aging of natural gas pipeline
- 1, when in use, should always pay attention to the color of the fire. Orange flames indicate incomplete combustion of gas, and in this case carbon monoxide is released. The fire can be adjusted by adjusting the air door at the bottom of the stove, and the flame is blue.2, soup or water, containers should not be overfilled, nor unattended, so as to avoid the fire was spilled soup, water and water leakage.3, in a stew or soup, some people love the flame was very small, this can easily lead to leakage or incomplete combustion. Therefore, in the use of gas stoves, the fire can not be too small.Between the 4, and gas appliance hose inlet connector to connect closely, preferably with a pipe clip.5, in the same room, strictly prohibit the simultaneous use of two kinds of fire sources.6, the family is best equipped with dry powder fire extinguishers, so as to be prepared.
- Q: High pressure hose crimping connector, pressed on what position can effectively prevent the head off?
- High pressure hose crimping connector, pressed on what position can effectively prevent the head off, need professional technology, you can find professional installation.If the burst pressure is greater than the standard 4 times the work pressure, even the qualified hose.
- Q: Why should the water stop strip be joined by heat instead of superposition?
- Lap joint of rubber water stop belt is lap joint, this method is not allowed in engineering, glue glue and do not use overlay. In the case of splicing, it is equivalent to not doing any treatment at the joint. In the process of pouring, the sealing strip is prone to roll and twist.
- Q: How long is the service life of a rubber tube?
- Look at what, the water does not move, you can use 5-10 years, activities may not! Generally 3-5 years resistant to oil!! See how it works!!
- Q: Faucet hose connection problem
- Ball valves can be made, but easy to leak. More than a few times to install a feeling, when the screw does not use brute force ah.
- Q: What with the appropriate suction tube Dichotomanthes tube and rubber machine
- The bellows are extruded by the extruder, and the winding tubes are wound in circles
Send your message to us
High Pressure Fuel Hose for Automative Reinforced One Layer
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 300000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
