High Lumen 100M/Roll Flexible Led Strip 220V
- Ref Price:
-
- Loading Port:
- Fobshenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 5000 Rolls Per Day roll/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
High Lumen 100m/roll Flexible LED Strip 220V
Specification
| Material | FPC board and SMD |
| Light color | red,green.bule,yellow,white,warm white and RGB |
| Watt | 2.4w/4.8W/7.2W/14.4w |
| Voltage | 110v/220v/230v/2240V |
| Waterproof | IP65 |
| Beam angle | 120° |
| Working environment | -25°C~+45°C |
| Life span | 50,000 hours |
| Warranty | 2 years |
| LED Chip | Epilstar |
| Color Temperature | 2700k-6500k |
| Power for single LED | 1W/350mA,3W/700mA |
| SMD type | 3528/5050 |
| Light Color | single color projecting,chasing and colorful |
Feature
Eco-friendly
NO UV radiation
Easy to be installed
High voltage 110/220/230/240v no need of transformer
Unique optical design,no light pollution,glare-free,uniform light field
Color rendering index greater than 90,good color performance,close to nature light
10~30years life span(6 hours per day)
Above 85% power effciency
2700k-6500k wide range color temperature
Significant energry saving,saving more than 90% saving rate compared to conventional incansescent lamp.
Application
Hotel . Restaurant .Dinner room.
Jewelry store. Shopping mall . Exhibition .
Corridor Emergency hallway lighting .Concealed lighting.
Backlighting for signage letters .Channel letter lighting.
Archway, canopy and bridge edge lighting.
Bar, KTV, Disco, Club. entertainment.
Advantage
110v/220V led strip can be used indoor and outdoor decoration and commercial lighting. It is an "updated version" of the low voltage strip. The use of DC 12V led strip has to be with a mini watt adapter, and its best length is 5 meters. For the projects, it's not convenient. Now our high voltage strip could deal with all the problems. 100 meters in one line without connection, and no signal amplifier needed. As 220-240V voltage is dangerous to our body, so we use the PVC material to protect and also the PVC material is waterproof.
Installation Diagram
1.Install:Take out the package,make sure it comes with necessary accessories,which should include:fixing clips,middle plugs,end caps,head wires.fix the strips with clips onto where you need,put the wire into sockets to light the strips.
2.Cut: Please cut the strips only along the cutting mark on the PCB,don't cut at random.Block up the end with end caps,seal with enough glue to make sure it is still waterproof.
3.Connect: Plug the head wire into a strip to conduct the electricity,or plug a middle plug into the ends of two separate strips to connect them into a long strip,after well connected,seal all the plugs with enough glue.
Our service
Your inquirey related to our products or price will be replied within 24 hours.
All your inqurieies will be well explained by our experienced staff .
OEM&ODM also provide customized service.
Distributorship is avialable for your unique design and some our current models.
We will keep secret for customer area, design ideas and all private information.
Packaging & Delivery
Package:
1 x Box
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q: The structural difference between the LED low voltage band and the high voltage band
- The biggest difference is: the high voltage lamp belt is in a meter parallel to the core line (you can 100 a pass!) The low voltage is directly to the line power supply (due to the thin line), if the line is long, it is bound to cause the back part and the first half of the brightness is completely different!
- Q: The problem of residual light in LED lamp after power failure
- The power line can be switched to zero. The main switch is off and caused by a zero line.
- Q: What is the wattage of the LED lamp with one meter?
- Each band must be equipped with a dedicated plug (plug with a transformer); when connected, be sure to remove the transparent plastic cover, and then try the lights and then cover. It must not be connected directly with a cover, so it is easy to short-circuit!
- Q: How does the PS make the band?
- This simple ah, on a new layer, with a white brush, or other color you want, draw a strip (lines), and then to the layer with a layer style, choose the Outer Glow layer style, select the color you want, and the appropriate size, value can be.
- Q: How much is the output voltage of the LED lamp belt driver?
- A series parallel circuit and the main LED bulb lamp with you, if you are a series circuit with 3 LEDs, the driving voltage is 12VDC, 6 beads, the driving voltage is 24V, of course, the circuit should be added to the current limiting resistor.
- Q: LED can the light belt be put in the water?
- No waterproof treatment, no, oh
- Q: LED lights belt, what mobile power, can not pull wires
- The LED light strip is usually powered directly by the 220V alternating current. Do not want to pull, use mobile power supply, can have DC 200V voltage to also be able to be illuminated. Such a high voltage mobile power supply, unless customized, the market may not have this specification mobile power supply.
- Q: What brand is the LED lamp with?
- If you want to buy, first of all, pay attention to test the anti-static ability of LED lamps. Antistatic capability is one of the important criteria to judge the quality of LED lamps. Generally speaking, LED lamps with high antistatic capability have long life and have higher safety factor. Therefore, in the purchase of LED lamps, be sure to pay attention to the strength of its anti-static capacity. Secondly, pay attention to check whether the current leakage exists in the LED lamp. And general lamps are different, LED lamps belong to one-way conductive light, if there is reverse current, this is the leakage. Once the leakage current of the LED lamp is large, the service life of the LED lamp will be relatively short.
- Q: LED current increases beyond 20MA, or when 30MA-50MA has consequences for LED lights?
- The first is the increase of temperature, and decay increase, if more than the maximum value of LED will soon be damaged
- Q: How do I choose the light belt?
- Light color choice belt mainly according to the customer's own style of decoration and color to determine the general Jiezhuang recommended with warm white, the color is yellow and white light color comfort, moderate brightness, decorative effect is warm. White LED decorative effect, clean and tidy. Light color consistency is good, suitable for simple style. The yellow light effect LED tone warm, but because the Yellow LED lamp luminous efficiency is not high, light is dark, so the color is dull. The use of more than the recommended number. Blue can be placed in the bar, the effect of the dream is fresh, whole room decoration ring can also highlight the glamorous and elegant style of decoration. The red and green light belt needs to be used with the background. It is not recommended. The color light needs to be coordinated with the controls. It can be used in audio-visual rooms and other decorations.
Send your message to us
High Lumen 100M/Roll Flexible Led Strip 220V
- Ref Price:
-
- Loading Port:
- Fobshenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 1 Roll roll
- Supply Capability:
- 5000 Rolls Per Day roll/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
