High Alumina Brick for Hot Blast Stove, Blast Furnace & Lime Kiln
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
High Alumina Refractory Brick for Hot Blast Stove&Blast Furnace&Lime Kilny
Feature:
1. bricks are made from high quality bauxite
2. dry pressed
3. burned under tunnel kiln
4. accurate dimension
5. high strength
Item | Properties | |||||
LZ-80 | LZ-75 | LZ-65 | LZ-55 | LZ-48 | ||
Al2O3 ,% | 80 | ≥75 | ≥65 | ≥55 | ≥48 | |
Refractoriness °C | ≥1790 | ≥1790 | ≥1790 | ≥1770 | ≥1750 | |
Bulk density,g/cm3 | 2.65 | 2.5 | 2.45 | 2.4 | 2.3 | |
Softening temperature under load | 1530 | ≥1520 | ≥1500 | ≥1470 | ≥1420 | |
Permanent linear change,% | 1500°CX2H | +0.1 | +0.1 | +0.1 | +0.1 | |
1450°CX2H | +0.1 | |||||
Apparent porosity,% | 22 | ≤23 | ≤23 | ≤22 | ≤22 | |
Cold Crushing strength Mpa | 55 | ≥50 | ≥45 | ≥40 | ≥35 | |
Application | All industrial furnace |
Production & Quality
1.Production Process
Crushing→Mixing→Shaping→Drying→Firing→Inspection→Packing shipment
2.Quality Control
a.According to the chemical content,raw materials are classified into different levels to ensure quality of brick first.
b.During the production,every brick will be weighed twice strictly to reduce the error of weight .
c.Before delivery, the inspectors will inspect the size,appearance,physical and chemical properties of brick again in factory.
F&A
Q1.Are you a manufacture or trader?
A:To be honest we are a trader,but we have stable cooperation factories.And we can supply good pre-sale service, after-sales service.
Q2.Can we visit your company?
A:Sure,welcome at any time,seeing is believing.
Q3. Do you provide samples?
Yes, samples are available.
Q4. Do you accept OEM?
Yes, we can do OEM.
Q5.What's the MOQ of trial order?
A:No limit,We can offer the best suggestions and solutions according to your condition.
Q6.What are the payment terms?
Usually T/T,but L/C,Western Union etc are available for us.
Q7. How long is delivery time?
The delivery time will be determined according to the quantity of the order.
Q8.How are your products’ quality?
The products will be strictly inspected before shipment, so the quality could be guaranteed.
Q9.How to slove the quality problems?
A:If the products are not confirmed to customer samples or have quality problems,our compay will be responsible to make compensation for it.
Q10.What is the service life of your bricks?
A:The service life of different bricks is unlike.It also depends on your using condition and method.
Q11.How about your company's certification?
A:ISO9001 and Test Report,also we could apply other necessary certification.
- Q: What is the heat preservation material used in a laboratory furnace?
- Silicon carbide (SiC) is made from quartz sand, petroleum coke (or coal tar), sawdust (green salt produced when adding green silicon carbide) and other raw materials by smelting with resistance furnace at high temperature. Silicon carbide also rare minerals in nature, Mo sangshi. Silicon carbide, also known as carbon silica. Silicon carbide is the most widely used and the most economical kind of refractory materials in C, N, B and other non oxide refractory materials. It can be called "carborundum sand" or "refractory sand".
- Q: What is the difference between corundum and high alumina??
- The difference between them lies in the content of alumina and the alumina refractory products with alumina content higher than 48%The content of Al2O3 is higher than 90%, which is called corundum brick.
- Q: Difference between low creep high alumina brick and ordinary high alumina brick
- The emphasis is on the physical and chemical indexes of low creep and high alumina bricks. The physical and chemical indexes of the high alumina bricks are different, too. They are DRL-1550And LZ-75 perform GB GB/T2988-2012
- Q: Which is faster for heat transfer between corundum bricks and high alumina bricks?
- There must be a difference. They vary in color from the amount of aluminum, the weight, the temperature, and the color.
- Q: Can high alumina brick resist carburizing?
- Louzhu can use heavy impervious material, it is neither high alumina brick nor mullite, this product can resist seepage and have good compressive strength
- Q: What kinds of minerals are there in the five major categories of ore crystal chemistry?
- Natural element minerals. Of minerals produced by an element (elementary substance). There are about 90 natural elements in the earth's crust, accounting for 0.1% of the total weight of the earth's crust. Can be divided into metal elements, mainly platinum and copper, silver, gold, etc., non-metallic elements, carbon, sulfur, etc., half metallic elements, arsenic, bismuth and so on.
- Q: What's the weight of the refractory bricks?
- Fireclay refractory bricks: 3.4kg-3.8kg - according to the quality of raw materials, prices ranging from 1 yuan to 2.7 yuan, high alumina refractory brick: three, high aluminum in 3.9kg or so. Ordinary T-3 firebrick weight calculation method: 230*114*65*2.2/2.1.
- Q: What is the difference between high alumina brick and clay brick?
- There must be a difference. They vary in color from the amount of aluminum, the weight, the temperature, and the color. For example: 75 high aluminum and 43 clay bricks, 75 single weight 4.5kg or more. 43 3.65kg or so, the use of temperature 75, high aluminum in about 1520, 43 of brick 1430 or so, the color of 75 pan white, 43 of the Loess color. In short, the difference is great.
- Q: How are the grades of high alumina bricks differentiated?
- If the content of Al2O3 is higher than 90%, it is called corundum brick. Because of the different resources, the standards of different countries are not exactly the sameFor example, European countries limit the content of Al2O3 for high alumina refractory materials at 42%.
- Q: What are the lining structures of lime rotary kilns and what are the requirements for refractories?
- The rotary kiln lining structure of rotary kiln and requirements on refractories calcining active lime according to the general output is divided into Nissan 300t, 400 t, 600 t, 800 t, 1000 t, 12000 t of kiln type, calcining zone temperature at 1350 degrees celsius. The kiln is divided into a discharge end, a cooling zone, a burning zone, a preheating zone and a feeding end, and the temperature of each section of the kiln ranges from 1000 DEG C to 1350 DEG C, and the requirements for refractory materials are different. The kiln refractory materials not only to withstand the high temperature impact, but also need to bear the material erosion, kiln rotation stress produced, so not only on the physico-chemical properties of refractory materials have strict requirements, but also for the construction of brick should be strictly.
Send your message to us
High Alumina Brick for Hot Blast Stove, Blast Furnace & Lime Kiln
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords