GSM900&1800&2100MHZ 2G&3G Tri- Band Mobile Signal Booster Amplifier Repeater with Full Kits
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
Application:To expand signal coverage of GSM900&1800&2100MHz which signal blind areas where signal is weak or unavailable.
A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band.
No more dropped calls ! No more poor reception !
No more runing to the windows or going outside to talk on your mobile phone !
A cheap and immediate solution that would allow them have clear phone calls or higher speed broad band.
No more dropped calls ! No more poor reception !
No more runing to the windows or going outside to talk on your mobile phone !
Now you can reach everywhere with signal boosters!
Features:
1. 300~1500 square meters indoor coverage.
2. Frequency bandwidth of 900MHZ&1800MHz&2100MHZ
4. Full-duplex mode (improvement of out coming and incoming )signal.
5. Low power consumption and avoid to interference to BTS.
6. LED indicate and judge to signal level of uplink and downlink.
7. Compatibility with CE and RoHS standards .
2. Frequency bandwidth of 900MHZ&1800MHz&2100MHZ
4. Full-duplex mode (improvement of out coming and incoming )signal.
5. Low power consumption and avoid to interference to BTS.
6. LED indicate and judge to signal level of uplink and downlink.
7. Compatibility with CE and RoHS standards .
8. Supports up to (30) users / calls simultaneously.
Specification:
Indoor coverage : 300-1500 m2
Frequency Range :890-915MHz/935-960MHz,1710-1785MHz/1805-1880MHz,1920-1980MHz /2110-2170MHz
Up-link Gain: 60dB
Down-link Gain: 65dB
Output Power UL: 20dBm, DL: 20dBm
Band Flatness: ≤±6
ALC: 31dB @ 0.1dB step
Time Delay: 1 us
Spurious Emission: Out-Band ≤-36dBm
Power Supply: AC110V～220V to DC+5V/8A
Working Temperature: -25 to+55 C
Humidity: 5-95%
Packing:
1. Repeater unit with power supply.
2. High Gain outdoor antenna.
3. Omni indoor antenna.
4. 5m and 15m RF cables.
5. A manual.
Warranty & Return Policy:
1. Warranty covers replacement within 12 months.
1. Warranty covers replacement within 12 months.
2. All returns must have an RMA number before they are returned to us. If product is received without an RMA number
it will not be processed.
3. You must place the item(s) including all accessories to be returned in protective packaging (shipping box) with bubble
wrap and make sure that the item(s) do not shake or rattle. Items that are sent in envelopes and incorrect shipping
containers will be refused and returned at your expense.
4. All unauthorized, no reason, etc. returns are subject to 10% restocking fee.
- Q:Can Tengda F6 repeaters be controlled by mobile phones?
- The repeater is the most simple and inexpensive networking equipment under the LAN environment to extend the network distance, the operation of OSI in physical layer, the repeater has a regenerative amplifier function for the signal on the line, to extend the LAN segment length (only for connecting the same LAN segment).
- Q:What is the principle of fiber repeaters?
- Black and white life explained the principle of fiber amplifiers, usually using rare metals to play a role in amplification;However, the optical repeaters will receive weak light signals from the optical fiber and convert them into electrical signals by the optical detector. After the regeneration or amplification, the light source will be excited again and converted into strong optical signals, which will be sent into the optical fiber to continue transmission. In the middle there is a process of converting electrical signals and regenerating them;The purpose of this process is to:In long distance optical fiber communication system, the loss of optical signal of optical cable line is compensated and the distortion of signal and the influence of noise are eliminated
- Q:What does a repeater connect to through a router?
- Enter the management of the higher router IP, login into the background, access to the wireless settings, all settings must ensure that the relay router settings and touch the same;Check "open WDS" and enter the SSID and BSSID (MAC address) of the wireless router to be bridged;
- Q:Is the bus relay fiber interface integrated with the bus repeater?
- Optical fibers use optical pulses to transmit information along the optical line, instead of using electrical impulses to transmit information along the cable. At one end of the system is the transmitter, the starting point of the information to the fiber line. The received electronic pulse information of the transmitter is derived from the copper wire cable, and then the information is processed and converted into an equivalent coded optical pulse. A light emitting diode or an injection laser is used to generate an optical pulse, and a lens is used to focus the light pulses into the optical fiber medium so that the light pulses are transmitted along the line in the optical fiber medium. The total internal reflection principle shows that the optical pulse easily eye optical line movement, optical principle of total internal reflection shows that when the incident angle exceeds the critical value, the light will not overflow from the glass; on the contrary, the fiber will be reflected back to the glass if the above do not want to see, look at this: is by resending the data signal or forward, to expand the network transmission distance to generate signals (i.e., amplifying and shaping of the original signal). Principle: a repeater is a device for connecting network lines, often used for two-way forwarding of physical signals between two network nodes. The repeater is the most simple network interconnection equipment, mainly to complete the physical layer, is responsible for the physical layer of two nodes according to a transmission of information, copy, adjust and complete the signal amplification function, in order to prolong the network length.
- Q:Japanese fire automatic alarm system. How can I dial the repeater?
- Now generally electronic dial code, S+S - that is loop bus. Passive contact is an action feedback signal, the need to relay things to 24V, in the 24V jumper to the beginning of the regular. The action of the module is to relay the 24V, and it is cut.
- Q:Are signal amplifiers or repeaters powered?
- Add switches and something like that in 100MA repeater is a device for amplifying signalsBut now that HUB has been replaced by switches, the white spot is that HUB is out of date
- Q:What is the difference between relay and bridge?
- Relay mode is the use of a wireless connection between the wireless router, wireless signal transmission from one point to the next relay relay, the signal is enhanced, and the formation of new wireless coverage area, to extend the coverage of wireless network to. In fact, as long as there are two relay enabled wireless router, you can expand the network coverage.
- Q:What is the meaning of intrinsically safe CAN repeater
- It should be intrinsically safe CAN repeater. CAN bus because of its good error control ability,
- Q:How does the jCG wireless router set up the Q5 repeater?
- Set the main router (legend is FAST brand):1, enter the router management page, set the LAN port IP:192.168.1.1 (keep the default settings);2, DHCP service settings: enabled (must be enabled);3, SSID number: WIFI user name, can be changed to remember, the default is. Bridge router to scan, select the number;Channel: 6 (1 or 11). The bridge should be consistent with this channel from the router;Start wireless function: tick;Turn on SSID radio: tick;Account No. WDS: no tick;4, wireless security settings: select WPA-PSK/WPA2-PSK;Authentication type; automatic;Encryption algorithm: automatic;PSK password: WIFI password, these 4 settings must be consistent with those from the router;5, save, restart the router.
- Q:Can the wireless repeater amplify the signal output by wire?
- If the wireless router can select AP mode when a router is used, the end users need to dial, generally the long nail flap with solid change thanks to cool routing with AP mode with whales, and when the router, and used to transmit radio signals.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
GSM900&1800&2100MHZ 2G&3G Tri- Band Mobile Signal Booster Amplifier Repeater with Full Kits
- Ref Price:
-
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 5000 pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
