Maintenance Free Non-Toxic FRP Composite Pipes
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
PRODUCT DESCRIPTION
1.Pipe Introduction
It is the ideal product for the transportations of the chemicals, drinking water, waste water, waste gas and sewer.
2.Characteristics
• Corrosion resistance High mechanical property
• Low friction coefficient
• Light weight
• Non toxic
• Maintenance free
• Long life span
• Double O ring sealing joint make the pressurization more convenient and unique.
• Convenient and quick installation
• Long life of more than 50 years
3.Production Range
Any type and specification RPMP of diameter DN400-DN4000 and pressure PN0.25-PN2.5MPa can be produced. Also, we can provide the customized product according to user’s specific requirements.
4.Application
Due to its own advantages, the RPMP is used extensively in the city engineering water supply and drainage, the water supply and the drainage or the recycle water in the electric factory, the waste water treatment, the oil chemical industry and so on.
TECHNICAL DATA
Stiffness | SN3750 | SN5000 | SN10000 | ||||||
Pressure | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 |
400 | 6.1 | 6.1 | 5.9 | 6.7 | 6.7 | 6.4 | 8.1 | 8.1 | 7.87 |
500 | 7.2 | 7.2 | 7.1 | 8 | 8 | 7.7 | 11.4 | 9.6 | 9.4 |
600 | 8.7 | 8.3 | 8.3 | 9.6 | 9.6 | 9.2 | 12.1 | 11.7 | 11 |
700 | 9.7 | 9.7 | 9.4 | 11.2 | 11.2 | 10.4 | 13.8 | 13.2 | 12.5 |
800 | 11.6 | 11.3 | 10.6 | 12.8 | 12.5 | 11.7 | 15.5 | 15 | 14.2 |
900 | 13.4 | 12.5 | 11.7 | 14.8 | 13.8 | 12.9 | 19.3 | 16.4 | 15.8 |
1000 | 14.6 | 13.7 | 13 | 16.2 | 15.1 | 14.4 | 20.7 | 18 | 17.3 |
1100 | 16.1 | 14.9 | 14.2 | 17.9 | 16.5 | 15.6 | 23 | 19.8 | 18.9 |
1200 | 17.2 | 16.1 | 15.4 | 19.6 | 17.9 | 16.9 | 24.7 | 21.5 | 20.6 |
1400 | 20.4 | 18.4 | 17.7 | 22.7 | 20.5 | 19.5 | 29.2 | 24.8 | 23.8 |
1500 | 22 | 19.9 | 18.7 | 24.4 | 22.1 | 20.7 | 31.4 | 26.3 | 25.3 |
1600 | 23.6 | 21.2 | 20 | 26.2 | 23.4 | 22 | 33.7 | 28.2 | 26.9 |
1800 | 26.3 | 23.5 | 22.4 | 29.2 | 26.1 | 24.7 | 36.4 | 31.6 | 30.3 |
2000 | 27.4 | 25.4 | 23.4 | 35 | 32.4 | 29.6 | 44.7 | 37.3 | 36.1 |
2200 | 29.7 | 27.6 | 25.3 | 37.8 | 35.3 | 32.6 | 48.7 | 41.5 | 40.4 |
COMPANT DESCRIPTION
CNBM,China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china building materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies.
CNBM International Corporation is one subsidiary of CNBM, we focus on offering good-quality products,professional service and complete solution to our customers. Strong delivery capacity, advanced technology& management, strong financing capability and excellent after-sale service are our advantages in sharing international market.
PACKAGING & DELIVERY
1.Packaging Details
Standard packing or your requirement
2.Delivery Detail
Shipped in 30 days after payment
FAQ
Q1.What's your sample policy?
A:We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.
Q2.Can you produce according to the samples?
A: Yes, we can produce or modify the products according to your request.
Q3.How do you deliver the goods to my country?
A:We can provide international express, such as DHL, EMS, UPS, FedEx, etc. We select air freight and sea freight upon your requests. Quotations if without mentioning the shipping costs are shipping fee excluded.
Q4.How much does it cost to ship to my country?
A:When you goanna to place an order, please contact us, because different country has different freight.
Q5.How to get the catalogue?
A:please contact us and tell us what you are looking for.
We will try our best to meet customers' demands. Welcome you come here to visit us. We sincerely welcome partners around the world to establish business cooperation with us on the basis of mutual trust, benefit and development.
PICTURES
- Q: What are the differences between inorganic FRP pipes and plexiglass pipes, what are the advantages and disadvantages?
- Inorganic glass fiber reinforced plastic wind pipe: magnesium magnesite soil and glass fiber mesh cloth made of advantages: flame retardant shortcomings: large proportion, low strength
- Q: What is the heat preservation of the plumbing pipe now? I'd like to use fiberglass Seek help from a master
- The simplest economy is the use of rock wool insulation. A little higher cost is polyurethane foam insulation, and the shell is made of PE yellow jacket. FRP insulation effect should not be too good
- Q: What are the advantages of glass fiber reinforced plastic sand pipe than HDPE pipe?
- Advantages of FRP pipes:1, insulation, acid, alkali and salt corrosion, antistatic, rust, aging is not easy, the service life of up to 50 years.2, non-magnetic, non electrical corrosion, waterproof performance, and can be used in humid environment or water for a long time without deterioration.3, high strength, is the same degree of the original PE pipe is more than 6 times, light weight, smooth wall, perforated cable when the friction coefficient is small, no cable operation.4, heat resistance, antifreeze, fire protection, fire retardant type. It can be used for a long time at -35 ~ 139 degrees celsius.5. The bending modulus is good, the impact resistance is strong, and it solves the defects of metal tube easy to decay and no distortion and elasticity.6, the cable across the bridge and across the river, the use of glass fiber reinforced plastic catheter is more economical and appropriate.7, construction and installation is very simple, no need to tie steel, pouring concrete.
- Q: Would like to ask about the plastic lined steel pipe, steel pipe, glass steel skeleton, the advantages and disadvantages of each ceramic pipe, to know a friend told, very grateful!
- FRP corrosion resistance, high strength (afraid of tanks), light quality, easy to install, socket or flange interface, the price is more expensive than cement
- Q: Are there any differences between FRP pipes and FRP pipes?
- Air duct is a pipe system used for air transportation and distribution. There are two kinds of composite air duct and inorganic air duct. The duct can be classified according to the shape and material of the section. Duct made of stainless steel duct, in the bite mouth, rivet joint, flange, four corners and other cracks painted with sealant (such as neutral glass glue). Surface dust and grease shall be removed before applying sealant. According to the section shape, the wind pipe can be divided into circular duct, rectangular duct, a variety of flat air pipe, wherein the circular duct resistance minimum maximum height, making complex. Therefore, the application of rectangular wind tube based. According to the material, the air duct can be divided into metal wind pipe, composite air pipe and macromolecule air pipe.
- Q: Who knows, how is the glass reinforced septic tank connected with the municipal pipe?
- If a glass fiber reinforced plastic outlet pipe is reserved, a new sewage inspection well is installed at the pipe end, and then a sewage pipe is installed to connect the reserved manhole of the municipal sewage pipe.
- Q: How to connect glass fiber reinforced plastic sand pipe?
- The overall pressure test shall be carried out with reference to the code for construction and acceptance of water supply and drainage engineering pipes (GB50268-97), with a length of not exceeding 1000m for one section. Double "O" type sealing ring connection can bear the small foundation settlement change, this is the most prominent feature. Docking can be used for ground pipeline installation, can also be used to connect the underground pipeline of individual short, if more construction can meet the requirements of pipeline connection, some information that this connection is a flat end of life, is the use of epoxy resin and glass fiber cloth paste paste, the specific operation method is: first brush the connecting part in the pipeline for a layer of epoxy resin after pasting a layer of glass fiber cloth, flat interface paste length is generally about 500 mm, usually labeled with 5~6 paste layer layer is more solid, each layer of paste paste thickness should not be too large to be a layer of initial setting after a layer of paste. Flange connection line rigid connection, mainly used for connecting glass steel pipe and cast iron pipe, valves and other accessories, often used by glass steel bell and spigot size design, processing special steel bell and spigot connection.
- Q: What's the price of fiberglass reinforced sand pipes?
- Specifications: DN100--DN4000 are available.Thickness: 5mm--20mm, bothQ:28O5--9I343I/ I86+O38I+2OO7
- Q: How can FRP tanks be connected to steel tubes?
- Field bonding process is usually provided by glass fiber reinforced plastic manufacturers, if there is no way, I can provide some experience for reference, there is little information, experience only.
- Q: A basic overview of FRP pipes
- FRP pipes are made of resin (feed water, food grade resin), glass fiber and quartz sand as raw materials and made by special process.
Send your message to us
Maintenance Free Non-Toxic FRP Composite Pipes
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 20000 m
- Supply Capability:
- 100000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
