Frp Pipe Fittings Light Weight and High Quality
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Specification
COMPANY INTRODUCTION
CNBM, China National Building Materials Group is a state-owned enterprise in charge of administrative affairs in china buiding materials industry. Established in 1984, CNBM is a large group corporation of building materials with total assets of 25 billion RMB and a total staff of 30,000.CNBM now owns 200 subordinating firms of solely owned and joint-venture companies.
CNBM International Corporation is one subsidiary of CNBM, we focus on offering good-quality products, professional service and complete solution to our customers. Strong delivery capacity, advanced technology & management, strong financing capability and excellent after-sale service are our advantages in sharing international market.
PRODUCT DESCRIPTION
FRP Fitting, a wide range of fittings as elbows, reducers, tees, caps, flanges etc. is available. Fittings are manufactured by the hand lay-up, contact molding and spray-up process. In hand lay-up and contact molding processes veil and alternate layers of mat and woven roving saturated with resin are applied on the mold. In spray-up process continuous strand roving is fed through a chopper gun, combined with catalyzed resin, and sprayed onto the mould surface.
CHARACTERISTICS
1. High anti-corrosion capability, long designed service time of 20 years;
2. Good hydraulic property, smooth inner surface with absolute roughness of 0.01mm, which is far less than that of carbon steel pipe or cast iron pipe;
3. Lightweight and facility to install and transport;
4. High specific intensity and reliable mechanical performance;
5. Low thermo-conductivity and small thermo-stress, which are allowed to be used in various conditions: exposed buried or suspended, in ocean or in deserts, freezing or humid;
6. Less joints and rapid assembly design: According to concrete engineering conditions, there are a several ways of connection designed for clients to choose, which include Adhesive-bonded Plug Joint, Adhesive-bonded End-to-end Joint, Flange Joint, Plug Joint with O-ring Gasket(with key-lock) and Thread Joint etc.
7. Good electrical insulation
8. Not rust, rot or corrode, not permeate, and without consequent pollution;
9. Anti-furring and vermiculate resistance;
10. Flexible design: the pipe can be designed on the shape and function according to its conditions of usage.
Technical data
Stiffness | SN3750 | SN5000 | SN10000 | ||||||
Pressure | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 | 0.25 | 0.6 | 1.0 |
400 | 6.1 | 6.1 | 5.9 | 6.7 | 6.7 | 6.4 | 8.1 | 8.1 | 7.87 |
500 | 7.2 | 7.2 | 7.1 | 8 | 8 | 7.7 | 11.4 | 9.6 | 9.4 |
600 | 8.7 | 8.3 | 8.3 | 9.6 | 9.6 | 9.2 | 12.1 | 11.7 | 11 |
700 | 9.7 | 9.7 | 9.4 | 11.2 | 11.2 | 10.4 | 13.8 | 13.2 | 12.5 |
800 | 11.6 | 11.3 | 10.6 | 12.8 | 12.5 | 11.7 | 15.5 | 15 | 14.2 |
900 | 13.4 | 12.5 | 11.7 | 14.8 | 13.8 | 12.9 | 19.3 | 16.4 | 15.8 |
1000 | 14.6 | 13.7 | 13 | 16.2 | 15.1 | 14.4 | 20.7 | 18 | 17.3 |
1100 | 16.1 | 14.9 | 14.2 | 17.9 | 16.5 | 15.6 | 23 | 19.8 | 18.9 |
1200 | 17.2 | 16.1 | 15.4 | 19.6 | 17.9 | 16.9 | 24.7 | 21.5 | 20.6 |
1400 | 20.4 | 18.4 | 17.7 | 22.7 | 20.5 | 19.5 | 29.2 | 24.8 | 23.8 |
1500 | 22 | 19.9 | 18.7 | 24.4 | 22.1 | 20.7 | 31.4 | 26.3 | 25.3 |
1600 | 23.6 | 21.2 | 20 | 26.2 | 23.4 | 22 | 33.7 | 28.2 | 26.9 |
1800 | 26.3 | 23.5 | 22.4 | 29.2 | 26.1 | 24.7 | 36.4 | 31.6 | 30.3 |
2000 | 27.4 | 25.4 | 23.4 | 35 | 32.4 | 29.6 | 44.7 | 37.3 | 36.1 |
2200 | 29.7 | 27.6 | 25.3 | 37.8 | 35.3 | 32.6 | 48.7 | 41.5 | 40.4 |
2400 | 32.6 | 30.3 | 28.4 | 41.8 | 38.8 | 34.6 | 53.4 | 44.6 | 42.8 |
2600 | 36.3 | 33.5 | 31.5 | 45.2 | 40.5 | 35.4 | 55.8 | 47.2 | 45.6 |
2800 | 39.6 | 36.0 | 34 | 49.4 | 45.1 | 42 | 62 | 53 | 51 |
3000 | 41.0 | 38.1 | 36.2 | 52 | 47 | 45.3 | 67 | 58.2 | 54 |
- Q: Why FRP pipes for outdoor waste gas treatment equipment are selected?
- Relative to the iron and steel materials such as glass, steel price is the highest, and can reach more than 25 years of life in the outdoors; other materials, such as: PP material, although very similar characteristics of steel and glass, but there is a fatal flaw: the outside is very easy to be corroded and aging, especially direct sunlight high and low temperature conditions, the service life is often less than two years.
- Q: Is the installation of FRP pipes required qualification?
- However, some industries may have corresponding requirements, and some owners may also require it. For example, apply fiberglass pipes to shipyards
- Q: Glass fiber reinforced plastic pipe to withstand 1.0MPa pressure, pipe wall to do how much thickness?
- This depends on the size of the pipe diameter, the greater the diameter, the thicker the wall.
- Q: FRP acceptance standard
- Perform hydrostatic test. In order to comprehensively check the installation quality of pipes, the pressure test shall be carried out according to the test methods stipulated in the code for construction and acceptance of water supply and drainage pipe works, and the allowable seepage water quantity shall be carried out according to the standards of the steel pipe.
- Q: Mending method for glass fiber reinforced plastic pipe
- Tip: if glass fibre reinforced plastic pipe is broken, it is suggested to replace it with new pipe.
- Q: Do I need CCC certification for ventilated GRP?
- The air duct is made of 10MM thick fiberglass pipe, and the design of the air duct is wrong. The FRP pipe is developed for fire control and smoke exhaust.
- Q: What are the materials used in smoke exhaust pipes?
- The exhaust pipe in the environmental protection system is divided into: suction duct, mine gas drainage pipe, coating cloth cylinder etc. in mine industry and construction industry in the central air conditioning system of factory and office building, with dust, smoke, oil, exhaust pipe, industrial environment with comfortable air supply pipe or post industrial pollution control. The exhaust pipe in accordance with the use of this distinction is several, the exhaust pipe is generally not used in building drainage pipeline in the smoke tube, because the rain is very prone to corrosion of steel, so in general use PC tube drain pipe.
- Q: Galvanized steel sheet and inorganic glass fibre reinforced plastic pipe are calculated according to this norm or norm
- 1, the quota valuation, wind pipe materials, such as the "loss" of galvanized steel has been included in the quota content, including the lap and material loss, making the wind pipe.2, when calculating the actual material, it can be calculated according to the calculation area of the air pipe * (1+ fixed loss) = the actual amount of material used.
- Q: What's the difference between glass fiber reinforced plastic pipe and glass fiber reinforced sand pipe?
- Sand sandwiched glass fiber reinforced plastic pipes only have more than one sand sandwiched with glass fiber reinforced plastic pipes, and sand layer can be understood to replace glass fiber with quartz sand. The sand pipe with the same thickness is compared with the glass fiber reinforced plastic pipe, but the sand holding pipe is cheap, but the strength is poor; and the glass steel pipe is opposite.
- Q: Can FRP pipes be used in heating pipes?
- FRP pipes are generally not used in heating pipes, because the use temperature of FRP pipes is limited, as detailed below:1. universal unsaturated polyester FRP can only be used for less than or equal to 60 degrees (HG/T20696-1999)2. bisphenol A unsaturated polyester FRP can only be used for less than or equal to 100 degrees HG/T20696-1999)3. vinyl unsaturated polyester glass fiber can only be used for less than or equal to 120 degrees HG/T20696-1999)4. epoxy FRP can be used for less than or equal to 90 degrees HG/T20696-1999)5. glass fiber reinforced plastic sand holding pipes can only be used for less than or equal to 50 degrees (GB/T21238-2007)
Send your message to us
Frp Pipe Fittings Light Weight and High Quality
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 50 pc
- Supply Capability:
- 50000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords