Foundry Coke Ash 8
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 10,000MT m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Foundry Coke Ash 8%
Parameters | Guarantee |
Total Moisture (As received basis) | 5% Max |
F Fixed Carbon (dry basis) | 90% Min |
Ash (dry basis) | 8% Max |
Volatile Matter (dry basis) | 1.5% Max |
Sulphur (dry basis) | 0.6% Max |
Size: | 80-120mm or 120-250mm |
Usage/Applications
Cupola isthe most common type of melting furnace used in the foundry industry. Heat,released from combustion of Foundry coke in the bed, melts the metallic chargematerials. Cupola operators depend upon foundry coke for several reactions intheir melt units:
Energy to support the melting of theiron, alloys and fluxes in any given charge
Carbon pick-up as the iron dripspast the coke bed area upon melting
Main Features of the Product
● High fixed carbon
● Low sulphur
● Ready to ship in stock
Inspection
CCIC at loading port to be final to both parties inquality and quantity
Packaging & Delivery
Foundry coke is to be packedin one ton bag or loose in container.
- Q:What is the sample quantity of coke moisture test? What is the test time? How many degrees? That is the national standard.
- Three, instrument and equipment of drying box: with automatic temperature adjusting device, can maintain the temperature of 170 DEG C and 105 a 180 a 110 C, the tray is made from galvanized sheet iron or aluminium sheet, size is about 300mm x 200mm X 20mm. The glass weighing bottles: diameter 40mm, high 25mm, and a grinding cover tightly. Dryer: inside the color of silica gel or granular anhydrous calcium chloride
- Q:Ca3 (PO4) 2, SiO2, coke and other raw materials for the production of silica gel (SiO2? NH2O), phosphorus, phosphoric acid and CH3OH, the following process raw materials comprehensive utilizationCa3 (PO4) 2, SiO2, coke and other raw materials for the production of silica gel (SiO2? NH2O (P), phosphorus, phosphoric acid and CH3OH, the following process raw materials comprehensive utilization rate is high, less waste(1) in the reaction, which belongs to the replacement reaction is ______[optional: (I), (II) and (III), (IV), (V).(2) chemical reaction equation II under high temperature of ______; solid waste can be used for ______. CaSiO3(3) reaction to be carried out in isolation and oxygen under anhydrous conditions, the reason is ______.(4) CH3OH can be used as a fuel cell fuel in strong acid medium, the electrode reaction type anode for ______.(5) pointed out that the significance of ______. (VI) in this part of the industrial production(6) written by P H3PO4, the reaction of the ______ ______.
- The answer is: Ca3 (PO4) 2+5C+3SiO2High temperature.?3CaSiO3+2P+5CO =; production of cement, brick or building materials such as;(3) R Si, Si and HCl reaction is the reaction of SiHCl3 with hydrogen, by the reaction of the hydrolysis of SiHCl3, IV, and the generation of hydrogen and oxygen in a certain range will explode, so it must be in contact with oxygen and anhydrous conditions,Therefore, the answer is: SiHCl3 hydrolysis, while the production of H2, mixed with O2 explosion, etc.;(4) methanol oxidation reaction, under acidic conditions, methanol in the cathode of carbon dioxide and hydrogen ions, CH3OH+H2O-6e-=CO2+6H+,The answer is: CH3OH+H2O-6e-=CO2+6H+;(5) the significance of this link in industrial production: recycling of raw materials, energy saving and emission reduction,The answer is: recycling of raw materials, energy-saving emission reduction;(6) from P to H3PO4, the phosphorus and oxygen into water and phosphorus pentoxide, compound phosphate, the equation is P+O2=P2O5, P2O5+3H2O=2H3PO4,The answer is: P+O2=P2O5; P2O5+3H2O=2H3PO4
- Q:Why is coke used in blast furnace steelmaking?Why not use coal?
- The role of coke in blast furnace steelmaking is as follows:(1) providing heat: the coke burns fiercely in the raceway in front of the tuyere of the coke oven, and the heat generated by the combustion is the main heat source in the process of blast furnace smelting.
- Q:Braised meat burning coke, iron black layer, I do not know how to clean, please help answer
- Orange to the bottom of the potCut a few slices of orange into the pot boil, stuffy night, second days will be turned over the paste paste, it is easy to clean up.7, the old telephone card, magnetic card washing paste potProblem Description: run out of phone cards, shopping cards, discount cards, VIP cards piled up, although there are people who love this kind of thing, but most people had no interest, so, or use it to do something. When cooking is paste pot, if made of hard coke fouling cleaning shovel, cause scratches with the wooden shovel, and difficult to completely remove the coke fouling. Why not let those old cards reflect the use value?Method of operation: with the card along the edge of the pot, and gradually remove the coke scale clean. Note that when you do not need to force too hard. If the card is made of hard plastic, can also be used to scrape the dirt on the gas stove.
- Q:Who knows the proportion of pig iron and coke used in Cupola
- There are doubts: blank parts output is too low.3, blank export rate: raw materials into melting after the formation of blank, under normal circumstances, the common casting investment for every 1 tons of pig iron, scrap steel and other major raw materials, the lowest to 85% iron, after casting output blanks, nozzle, nozzle, riser, riser for iron smelting water ratio of about 30%; blank standard export rate, nozzle, riser re melted continue after put into use; production enterprises invested 1 tons per dryer, iron scrap and other major raw materials to the lowest 85% of the hot metal, roughly the same with ordinary casting, casting blank after the (standard yield) for hot metal ratio is about 70%, water riser for hot metal ratio is about 15%, and the same outlet riser re melted after continued use.
- Q:Which heroes know, please give the source of the data.
- Each ton of refining coke can produce 430 cubic meters of gas, half melted combustion, the other half must be recovered with a special device, it can only be discharged directly into the air or "point sky lanterns
- Q:After the long-term use of non stick pan, oil stains can not be effectively removed, over a long period of time in the non stick coating on the formation of a layer of coke, the effect of losing non stick. As a result of this layer of coke is relatively dense and smooth, scouring cloth has been ineffective, steel ball can not be used to damage the coating, what chemical or physical methods to remove this layer of coke?
- Soak in hot water for a few hours (or a day and night).Two, with cooking shovel (Mason's Pihui knife is best) to remove surface soft.Three, the same with a spade close to the bottom of the pot to eradicate. Until the last thing left is black.
- Q:What is the effect of coke moisture on the blast furnace?
- The influence of coke moisture on blast furnace can be divided into two parts:
- Q:What is the difference between coke and carbon residue? Coke is a high-temperature refining, carbon residue can be used for civilian fuel it?
- Types of coke:Coke is usually divided by use of metallurgical coke (including blast furnace coke, coke and iron alloy coke, calcium carbide and coke gasification etc.) with coke. The pressurized pulverized coal forming coal, coke carbonization etc. in the new postprocessing process called Formcoke.1, metallurgical coke, metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% are used in blast furnace, the furnace coke often called metallurgical coke.The metallurgical coke quality standard (GB/T1996-94) made in China is the quality standard of blast furnace
- Q:Distinction and distinction of cokeSoil coke, improved coke, coke machine coke do, what is the difference between
- Two, the type of coke:Coke is usually divided by use of metallurgical coke (including blast furnace coke, coke and iron alloy coke, calcium carbide and coke gasification etc.) with coke. The pressurized pulverized coal forming coal, coke carbonization etc. in the new postprocessing process called Formcoke.1, metallurgical coke, metallurgical coke is coke, coke, iron alloy coke and non-ferrous metal smelting coke for metallurgical coke collectively. More than 90% are used in blast furnace, the furnace coke often called metallurgical coke.The metallurgical coke quality standard (GB/T1996-94) made in China is the quality standard of blast furnace
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
Foundry Coke Ash 8
- Loading Port:
- China Main Port
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 10,000MT m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords