Fireclay Brick - Chamotte Fireclay Fireproof Refractory Bricks SK32/SK34/SK36/SK38
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
It is widely used in metallurgy, petroleum, chemical industry, building materials,
machinery processing, military, etc of thermal technology equipment.It is widely
used for MgO Reduction Furnace, Blast furnace, Hot Blast Stove, Tunnel kiln ,
Steel Ladle,Steel smelting furnace, Coke oven,chimney,Waste incinerators ,Casting
products,Boilers, Cement kilns, Carbon furnace, Glass kilns and a variety of furnace
linings and thermal equipment.etc.
Products data:
ITEM | SK-32 | SK-34 | SK-36 | SK-38 |
Al2O3(%)Min | 35 | 38 | 48 | 65 |
Fe2O3(%)Max | 3.00-4.00 | 2.50 | 2.00 | 2.00 |
0.2Mpa Refractoriness under load (°C) Min | 1300 |
1350
|
1450
|
1500
|
Apparent porosity(%) | 22-26 | 20-24 | 20-23 | 20-22 |
B.D(g/cm³)Min | 2.05-2.10 | 2.10-2.2 | 2.25-2.35 | 2.40-2.50 |
Cold crushing strength Mpa | 22 | 25 | 45 | 50 |
FAQ
Q1: How do you control the products quality?
A1: With strict quality control system throughout the materials selection and production process, our refractory and ceramic fiber products quality is effectively controlled to meet customer requirements.
From the raw materials selecting, our quality control begin. The quality certificates of raw materials are required and each batch will be tested before using. During production, the quality control are conducted by workers and then each piece will be sorted and examined by quality supervis
Q2: What`s the lead time for my order?
A2: It depends on customers’ requirements and our production schedule. And usually we need 30-60 days for refractory bricks,10-25 days for unshaped refractory materials and 10-20 days for ceramic fiber blankets.
Q3: Can you offer Door-to-Door delivery?
A3: Yes, but only for some countries such us U.S., UAE, Saudi Arabia, Iran, and Russia, etc.
- Q: Which thermal stability of clay bricks and high alumina bricks is good?
- Thermal shock stability is much better than clay brick.
- Q: Whether the cement kiln refractory bricks belong to hazardous waste or not?
- No, there is no harmful gas produced, and it will not pollute the ground.
- Q: What kind of coal should be used to burn refractory brick? and how many calories smoke is suitable?
- Coal briquette's effect is also good
- Q: Can refractory be used to sharpen knife?
- Many factories build a smelting furnace by using this kind of bricks. A special knife grinder can be used to sharpen knife, can on 1. They are sizing and non-sizing refractory bricks respectively. Refractory brick is now a lot of fields and industry will introduce one of the raw materials. Products are divided into two different types, refractory brick as a high temperature resistance of the raw materials. In simple terms, working temperature is 770 DEG C, 580 C and 1, of course, refractory bricks also can be used to sharpen knife, use smooth brick to sharpen, need to choose high hardness
- Q: Is the waste of the fire resistant hazardous waste?
- it mainly depends on whether the refractory bricks contain chromium, if not, we only need to properly dispose of them, it would cost less and assure that there is no bad effect on people and the environment, shoot two hawks with one arrow; if there is hazardous elements like chromium and mercury, it may cost much and be disposed as industrial waste(or construction waste) by local environmental protection department, it is ok if there is a large amount of waste, because the environmental protection department will not take those waste that is not obviously dangerous seriously, even if it is dangerous waste. If there is no suitable manufacturers. It is better to look for a refractory brick manufacturers to recycle it, the cost is acceptable if the amount is small. In general, these heavy metal containing refractory bricks need to be disposed by the company that has quality to dispose such hazardous waste.
- Q: What is the difference between clay brick, glazed tile and brick?
- Glazed tiles are bricks that have been burnt and glazed on the surface of bricks. Is the surface of glaze firing together, the main body consists of clay and clay two, back out of the red clay, abaxially grayish white porcelain clay fire. Glazed tile surface can do a variety of patterns and patterns, than polished brick color and pattern rich, because the surface is glaze, so wear resistance is better than polished brick.
- Q: Can thick steel plate be used instead of the furnace inside the refractory brick?
- It depends on the temperature. The steel plate is a kind of heat conduction material which hasn't heat insulation, which should be based on the working environment.
- Q: can castable refractory replace refractory bricks in rotary?kiln?
- depend on where you use, rotary kiln is not a good place to use it. it can repair the kiln.
- Q: Where are clay bricks or cement bricks?
- Cement brick is the use of fly ash, cinder, coal gangue, slag, chemical residue or natural sand, sea mud etc. (more than one or several kinds of raw materials) as the main raw material, made of cement coagulant, a kind of new wall materials by high temperature calcination made called cement brick.
- Q: Why is there cracks in the use of refractory bricks?
- Several reasons for the emergence of cracks: (1) temperature difference stress (2) mechanical stress (3) crystal type change stress
Send your message to us
Fireclay Brick - Chamotte Fireclay Fireproof Refractory Bricks SK32/SK34/SK36/SK38
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 m.t.
- Supply Capability:
- 10000000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
