Drilling Machine Truck for construction and buliding
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 100 PCS/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Drilling Machine Truck
What is the application of our products ?
1. Mainly for water well, agricultural irrigation, geological survey and construction.
2. Facilitates convenient to transport and start a new drilling project.
3. Multiple purpose and multiple functions for drilling.
4. Easy to operate and maintain, High reliability and long life for working.
5. Economy compared with machines with the same drilling ability.
What is the advantage of our products ?
1: Does the car provide the power for drilling?
No, the drilling rig is powered by diesel engine or electric motor which is separated from the power of car. And they are
all together with the car, so that the drilling machine can be transported easily.
2: What is the max depth and the max diameter of holes?
Theoretically speaking, the 90mm to 1200mm in max diameter and 200m in the max depth are available. Here please
note that the real depth and diameter might be different as per your special local working strata
3: What is your mentioned “Multiple Functions” of this drill?
More drilling technology, normal and reverse circulations for both mud and air, mechanical unit and hydraulic unit for
mask up-down, etc. If more requirement and questions for this drill rig, please contact us for more details.
Hole Diameter (mm) 120-1500
Hole Depth (mm) 400
Run Of Rod (m) 3, 4
Drill Rod Diameter (mm) φ89
Drilling Technology Normal and Reverse Circulation for Both Mud and Air
Drill Head Inside Diameter (mm) φ80 ,φ120
Drill Head Lifting Speed (m/s) 0.37 0.16
Drill Head Lifting Force (kN) 45.40 105
Drill Head Spin Speed A (Forward: 20-33-73) (Reverse: 13-23-47)
B (Forward: 36-58-127) (Reverse: 23-37-80)
Main Hoist Lifting Force (Kn) 25
Feed Thrust (kN) 0-15
Dimensions (mm) (L-W-H) Working Conditions: 9600*2950*7900
Transport Status: 10200*2470*3300
Supporting Form Hydraulic Screw
Mask Up-Down Hydraulic Unit
Rig Mass (kg) 12500
Chassis JIE FANG CA1127 or DONG FENG EQ1141
Power Unit Diesel Engine
Power (kW) 84
Mud Pump BW600/3 Mud Pump
Pressure 3 Mp 4 Mp 5 Mp
Flow (m3/h) 720 L/min 513 L/min 335 L/min
Note: This specification is just for reference, any changes are subject to the products.
- Q: Procter &gamble has some common cleaning equipment in the cleaning of the property
- Electric escalator cleaning machine: the clean and dry cleaning and drying of electric escalators are the best choice, easy to operate, multi-function and clean environment. Special design for escalators with different softness to choose from. Vacuuming, "water" as a filtration system, and equipped with a drain. The brush cover is equipped with special cleaner distributing device, easy to operate, easy to clean or change. Solve the problem of the traditional cleaning escalator.
- Q: How to keep the equipment clean
- The equipment needs to protect the electric motor circuit and the structure that need to adjust often is good! ~
- Q: What should I consider? To solve the
- Cleaning equipment at present, a lot of international medical devices by using ion exchange, reverse osmosis and ion exchange group legal and reverse osmosis and EDI combination preparation of medical apparatus and instruments clean water, the water treatment equipment manufacturers aimed at the development of medical cleaning equipment market space, are put into research and development industry. According to the process of the preparation of ultra-pure water, there must be an advantage in the development of devices.
- Q: What are the sanitation facilities?
- There are many kinds of clean sanitation equipment, general sanitation cleaning equipment to sweep the floor clean, high pressure cleaning is given priority to, the driving type is sweeping machine was used to replace the manual cleaning equipment, high pressure cleaning machine can finish the stubborn stains such as the ground oil clean.
- Q: How often do the reverse osmosis of pure water equipment wash the search?
- RO reverse osmosis membrane using time according to the general use of regional water quality or in front of the RO membrane filter replacement time, water a day in front of 5 litres of about half a year to replace the RO membrane filter, RO membrane can be used commonly 2 years no problem. The RO film is not well cleaned and should not be used.
- Q: Where can I buy cleaning equipment
- Taobao, ali has a lot of, but the preparation factory actually is a few, the basic of taobao is the trafficker... If you haven't done it, try not to buy it, the depth of the device, it's too easy to get into a pit, find a physical store to practice, and see what they're using to buy the best
- Q: The main parameters of ultrasonic cleaning equipment
- Frequency: greater than 20KHz, which can be divided into low frequency, medium frequency, high frequency 3 segments. 2. The power density, power density = transmission power (W)/launch area (cm2) usually acuity 0.3 W/cm2, the higher the power density of the ultrasonic and cavitation effect is stronger, the faster, the better cleaning effect. But for delicate, surface finish, the high power density of long time can be used to "cavorate" the surface of the object. 3. The ultrasonic frequency, ultrasonic frequency is lower, the easier the cavitation in the liquid, the strength is big, has the stronger, is suitable for the workpiece (coarse, dirty) at the beginning of washing. High frequency of ultrasonic direction, suitable for fine cleaning. 4. Clean temperature: generally speaking, ultrasonic at 30 ℃ and 40 ℃ when cavitation effect is best. The higher the temperature, the greater the effect. Normally when actual application of ultrasonic wave, using the working temperature of 50 ℃ to 70 ℃.
- Q: The heavy oil on the machine should use what cleaning agent to clean up?
- Kay's oil pollution cleaning agent A lot of machinery factory USES oil pollution cleaner now, the effect is very good,. ,,,,,,
- Q: Is there any molding equipment in the car engine?
- You don't want to take the engine apart and you want to clean up the carbon in it? It's going to be a big problem. Be careful. In case the carbon is filled with oil filters, there is a precedent for the effects of a short period of oil. If it's an engine that's removed and the parts of the engine are cleaned, you can use an ultrasonic cleaning machine (I guess you don't mean that). This is the same as weight loss, normal maintenance is crucial, once the carbon is much carbon, processing is difficult.
- Q: How many kinds of cleaning equipment are there for cleaning companies?
- Other cleaning: sofa machine, air conditioner, steam engine, vacuum suction machine, multi-function washing machine, polishing machine, stone retread machine, etc
Send your message to us
Drilling Machine Truck for construction and buliding
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 PCS
- Supply Capability:
- 100 PCS/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
