Dlc Ul Etl Lm79-80 Smd2835 T8 Led Tube Lamp ,4Ft 1.2M 120Cm 1200Mm 18W 48Inch
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 5 Pieces pc
- Supply Capability:
- 50000 Pieces pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1:Certification : ETL &CETL CE ROSH PSE Approval
2:LM79-80 tested
3:No need to remove the Starter and Ballast
Detailed Product Description
1.Original manufacturer
2.With patent structure
3.Good heat sink, 2-5 years warranty
4UL .ETL,CE,RoHS,PSE,CETL
Ideal replacement of fluorescent lamp | v1.5 | |||||||||
Specification: | • No mercury and other hazardous materials, fully RoHS-compliant,100% recyclable • Solid state, high shock / vibration resistant • Quick and easy installation to minimize retrofit costs • Ra>75 • Temperature Increase ≤17°C (Room temperature@25°C ) • Instant soft-start • No RF interference • No Noise • No Flickering • Electronic Ballast Free • No starter and inductive ballast removal requirement • Rotatable Tube hat version available ( + $3.00/pc ) • Warranty: 2 years | Bitmap | ||||||||
Part No. | SMD Q'TY | Tube Cover | Operating | Watts | Luminous | Packing Dimension | ||||
(pcs) | Voltage | (W) | Flux (LM) | LxWxH (cm) | ||||||
H-T8-3S-060-08W Size:600*26mm | 120 | Clear | AC110-277V | 8W | 800LM | Carton Size: 70*31*26cm 30pcs/Carton | ||||
Striped | 750LM | |||||||||
Frosted | 650LM | |||||||||
H-T8-3S-060-10W Size:600*26mm | 144 | Clear | AC110-277V | 10W | 900LM | |||||
Striped | 850LM | |||||||||
Frosted | 750LM | |||||||||
H-T8-3S-090-12W Size:900*26mm | 180 | Clear | AC110-277V | 12W | 1100LM | Carton Size: 100*31*26cm 30pcs/Carton | ||||
Striped | 1000LM | |||||||||
Frosted | 900LM | |||||||||
H-T8-3S-120-15W Size:1200*26mm | 240 | Clear | AC110-277V | 15W | 1500LM | Carton Size:130*31*26cm 30pcs/Carton | ||||
Striped | 1400LM | |||||||||
Frosted | 1200LM | |||||||||
H-T8-3S-120-18W Size:1200*26mm | 288 | Clear | AC110-277V | 18W | 1800LM | |||||
Striped | 1700LM | |||||||||
Frosted | 1450LM | |||||||||
H-T8-3S-120-20W Size:1200*26mm | 312 | Clear | AC110-277V | 20W | 1900LM | |||||
Striped | 1800LM | |||||||||
Frosted | 1550LM | |||||||||
H-T8-3S-150-18W Size:1500*26mm | 288 | Clear | AC110-277V | 18W | 1800LM | Carton Size:160*31*26cm 30pcs/Carton | ||||
Striped | 1700LM | |||||||||
Frosted | 1450LM | |||||||||
H-T8-3S-150-22W Size:1500*26mm | 336 | Clear | AC85-165V AC165-277V | 22W | 1980LM | |||||
Striped | 1880LM | |||||||||
Frosted | 1600LM | |||||||||
H-T8-3S-150-24W Size:1500*26mm | 360 | Clear | AC85-165V AC165-277V | 24W | 2180LM | |||||
Striped | 2080LM | |||||||||
Frosted | 1750LM | |||||||||
H-T8-3S-180-26W Size:1800*26mm | 384 | Clear | AC85-165V AC165-277V | 26W | 2300LM | Carton Size:190*31*26cm 30pcs/Carton | ||||
Striped | 2200LM | |||||||||
Frosted | 1850LM | |||||||||
H-T8-3S-180-30W Size:1800*26mm | 432 | Clear | AC85-165V AC165-277V | 30W | 2500LM | |||||
Striped | 2400LM | |||||||||
Frosted | 2000LM | |||||||||
H-T8-3S-240-36W Size:2400*26mm | 576 | Clear | AC110-277V | 36W | 3400LM | Carton Size:250*31*26cm 30pcs/Carton | ||||
Striped | 3400LM | |||||||||
Frosted | 2800LM |
LED Tube Light Applications:
Widely applied in hotel , meeting room , offices , hospitals , schools , factories ,
shopping malls , supermarkets , kitchen, home indoor lighting and so on
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
Air freight | 3-10 business days |
By Sea | 30-40 business days |
1. 3-5 business days for Sample Orders; 7-30 business days for Bulk Orders for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
Factory:
- Q: What about the quality gap between leds?
- You can look at the whole of the lamp tube first, see the mark on the lamp, mark, model, rated voltage, rated power, etc. And then see if the lamp tube is made of fine workmanship, and how it feels.
- Q: How long does the energy-saving daylight lamp tube change?
- Fluorescent lamp use time is long, the brightness is low is normal [because of the efficiency of fluorescent powder is reduced, cause lamp tube brightness drops]. The general store is not convenient to replace at any time, it is better to replace it at once. If you increase the density of the light, the light efficiency of the tube will not increase much, and the energy will increase with the opening of the tube, a little waste. A one-time change is a lot of input and a lot of it is compared to the actual computation.
- Q: How does the traditional daylight lamp tube replace the LED light tube?
- You don't have to change any of the lines, you have to remove all of the fluorescent lights, you just leave two lines, and then you connect the two ends of the LED lights
- Q: What is the flux of the general led daylight light
- My own production of LED fluorescent lamp, single lamp 130 lm/W, if the light bead is 16.5 W, the total luminous flux can reach 2145 lm, efficient use of power supply in 90%, total power is around 18 W lights lit, overlapping there will be a loss, the loss and the printing ink of aluminum plate used reflective effect has much to do, usually in about 10% of the loss, add cover outside, usually the light transmittance of transparent cover is 94%, milky white cover transmittance is 75% to 75%, so in a transparent bubble of 18 W LED fluorescent lamp, for example, using the highest light LED, the total luminous flux can reach 130 * 16.5 * 94% * 90% = 1800 lm, the whole lighting effect of about 100 lm/W, quite obvious energy saving effect or hi
- Q: How do you know whether a fluorescent tube is good or bad
- There is a small filament in each end of the normal daylight lamp, and the two feet on each side of the lamp are interlinked with the multimeter (only very small cold resistance). Working principle is: making after vacuum tubes when filling the silver (mercury), a small drop of water on the walls painted with fluorescent powder, the bulb is started, at the ends of the filament after heating, mercury evaporates into gas, gas is ionized conductive lines into loop, gas release a large number of ultraviolet (uv), at the same time by the ultraviolet radiation fluorescent powder from visible light. In addition, when after the lamp aging on both ends of the filament evaporation guide to black on both ends of the tube, the tube sometimes no broken cannot use the filament lamp to glow (so).
- Q: Daylight lamp tube is broken, does not clean can be bad? In the office
- Of course, it's easy to clean up the broken glass and then put it in a paper bag and throw it in the trash
- Q: Is an LED 20 watt equivalent to 40 tubes?
- The equivalent of 40 to 60 w. Theory led luminous efficiency is more than 10 times of incandescent lamp, energy-saving lamp is 2 to 3 times, but according to the feeling of the human eye not probable, because the led color temperature difference is very big, also is white is a lot of kinds, unlike CFLS in general only warm white (3000 k) is the white (4500 k) two kinds, calculate by is white multiples this is true, but when the temperature above 6000 k will feel a lot of dark, smooth color slants, a bit like a jack-o '-lantern, so buy the led lamp in the guest is white, the bedroom to warm white (3500 k) advisable, can't see how much watts.
- Q: The various specifications of LED fluorescent tubes
- LED fluorescent tubes with the traditional fluorescent lamp in installation dimensions are the same caliber, length of 1500 px and 3000 px, 3750 px, the three kinds of the length of the LED fluorescent lamp power is 16 w and 10 w, 20 w, length is 600 mm, 900 mm and 1200 mm, 1500 mm, its power, respectively, 14 w, 9 w 18 w and 25 w, 20 w and traditional fluorescent lamp actual power consumption of about 53 w, 40 w fluorescent lamp traditional practical about 68 w power consumption; 9 w LED fluorescent lamp brightness than 18 w fluorescent lamp brightness to light, 18 w LED fluorescent lamp brightness than the traditional 40 w fluorescent lamp, LED fluorescent lamp brightness is especially more soft and make it easy for people to accept. The service life is between 30, 000 and 50, 000 hours of power supply as ac85v-260v (communication).
- Q: What are the advantages and differences of the LED panel lights?
- In the case of thickness, the luminescent panel lamp is generally more than the side glow, and the side glow is usually done
- Q: The LED fluorescent tube plus the ballast why is it still going to press?
- Capacitor to eliminate the effect of the power supply of electromagnetic interference with ballast tank formation, and increase the voltage amplitude of the start pulse. An electrode in the discharge tube with double metal,
Send your message to us
Dlc Ul Etl Lm79-80 Smd2835 T8 Led Tube Lamp ,4Ft 1.2M 120Cm 1200Mm 18W 48Inch
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 5 Pieces pc
- Supply Capability:
- 50000 Pieces pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches