T8 LED Tube SMD Chip High Efficiency 0.9M 13W
- Ref Price:
-
$7.46
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- TT
- Min Order Qty:
- 10 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
T8 LED Tube SMD Chip High Efficiency 0.9M 13W 1. This product meets the standard of CE certification.
2. With internal No-isolated power supply.
3. Round and the elliptical tube are available.
4. Use the most mature international well-known LEDSMD2851 as the light source, which can ensure the led tub35 as the light source, which can ensure the led tube brightness and long lifetime, also can reduce the light decay.
5. Use the high quality aluminum PCB for LED’s better heat dissipation.
6. High-grade PC cover with nice light transmittance(> 95%),Transparent PC cover and frosted PC cover are available.
7. 180 degrees beam angle makes the lighting effect better.
8. CRI(standard products)>70,it can be over 80 if required.
9. Ambient temperature:-20°C-40°C, surface temperature: 42°C-45°C
10. No mercury, lead or other hazardous materials; no radiation, no electromagnetic radiation, no frequency flash, instant start up, no hurting eyes.
Applications:
Replacement for conventional fluorescent tubes:
1. Hotels
2. Conference/ meeting room
3. Commercial Complexes
4. Residential/ Institution Buildings
5. Schools, colleges & Universities
6. Hospitals General li
2. With internal No-isolated power supply.
3. Round and the elliptical tube are available.
4. Use the most mature international well-known LEDSMD2851 as the light source, which can ensure the led tub35 as the light source, which can ensure the led tube brightness and long lifetime, also can reduce the light decay.
5. Use the high quality aluminum PCB for LED’s better heat dissipation.
6. High-grade PC cover with nice light transmittance(> 95%),Transparent PC cover and frosted PC cover are available.
7. 180 degrees beam angle makes the lighting effect better.
8. CRI(standard products)>70,it can be over 80 if required.
9. Ambient temperature:-20°C-40°C, surface temperature: 42°C-45°C
10. No mercury, lead or other hazardous materials; no radiation, no electromagnetic radiation, no frequency flash, instant start up, no hurting eyes.
Applications:
Replacement for conventional fluorescent tubes:
1. Hotels
2. Conference/ meeting room
3. Commercial Complexes
4. Residential/ Institution Buildings
5. Schools, colleges & Universities
6. Hospitals General li
- Q: The light tube is directly connected to the zero fire line at 220V, and the other end is empty
- Without special LED daylight tube bracket, that a head of both foot and had to be taken up with, so that two feet you a foot line, the other foot to zero, then formed the phase line directly after the zero line, which is very dangerous, short circuit,
- Q: What about the quality gap between leds?
- This one, you may want to consult a professional, I know that so much
- Q: How to detect the good and bad of the fluorescent lamp
- If you measure the resistance at both ends, it's not bad
- Q: Why is it that when my electric car is charged, the light bulb is burning in the house, and the incandescent lamp is fine, and the other appliances are normal
- It is possible that the high frequency pulse of the charger inside the charger is flowing into the power grid, causing the fluorescent lamp ballast to work and burn down. Electric car charger belongs to the circuit structure of the switching power supply, and the internal vibration circuit is used to produce high frequency signal to drive the transformer. Please use the TV interference method to test electrical good or bad. Put the charger in the TV next to blunt electricity. Television will have interference image will solve the problem that there is something wrong with the charger repair and replacement..
- Q: How do I get the four joints of the LED fluorescent tube, and I'm going to do any two of them that can search through the AC220V to light up, and not make the wire and the zero line together? thank you
- It is impossible to realize that the four joints are actually the lead of the two filament, if the wire and the zero thread are attached to the ends of a filament, the filament is instantly broken. And the lamp is lighted with a core-ballast or electronic ballast. 220V can't be lit.
- Q: What kind of lamp tube is the 2G11 lamp of LED fluorescent lamp
- It's a lamp holder, which is different from T8 T10. The spacing of the pins is different. Look at figure 2G11. If you don't understand, you can add me Q9, 5, 3, 4, 7, 2, 5, 3, 2
- Q: How many leds will be able to reach the 30W T8 lamp?
- The LED T8 14W is fully up to 30W.I hope my answer will work for you.
- Q: Use LED fluorescent lamp tube to replace, the line of original daylight-tube seat should be refitted
- If both ends with electronic ballast, it is necessary to put the two end of the circuit board uninstalled, two card old fluorescent lamp line sub respectively, and then to the outside power, install the LED fluorescent lamp with respect to OK.
- Q: Feasibility analysis report of LED lamps
- A: hello, may I help you? Is the report for the government? I have contact information in my profile
- Q: Is the normal daylight tube replaced by an LED line
- Step 1: use a screwdriver and a pliers to disconnect the ballast from the wire. But my home is the sun lamp base of zhengtai, the quality is too good, it took 10 years. I didn't even get down to the ballast, which was stuck in a full thick iron base, so I disconnected the wire. The wire that disconnects from the ballast is sure to have two heads, just to disconnect the connection. There is a lot of direct skewers of black tape, some of which use that connector and screw the two wires together. It's the same thing. This is the connector that is used in this case. Disconnect the regenerator, remove the wire and then rewire the two broken wires together and attach the black tape (which is the insulating tape). Put the base back to the original. Install the fluorescent tube, and remember to place the head of the European logo on the base of the current. And when you put it in place, it's going to be OK.
We are a leading manufacturer of a broad range of LED strip light and LED Tube light. From 2011, we have integrating sphere spectrometer, high speed automatic placement machine, reflow soldering machine, automatic dispensing machines and other specialized equipment and professional R & D department. LED strip light can produce up to 300000 meters per month.
1. Manufacturer Overview
| Location | Shenzhen,China |
| Year Established | 2011 |
| Annual Output Value | |
| Main Markets | Mid East；Western Europe |
| Company Certifications |
2. Manufacturer Certificates
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period |
3. Manufacturer Capability
| a) Trade Capacity | |
| Nearest Port | Shenzhen |
| Export Percentage | |
| No.of Employees in Trade Department | 20 People |
| Language Spoken: | Chinese |
| b) Factory Information | |
| Factory Size: | Above 4,000 square meters |
| No. of Production Lines | About 5 |
| Contract Manufacturing | OEM Service Offered；Design Service Offered |
| Product Price Range | Cheap |
Send your message to us
T8 LED Tube SMD Chip High Efficiency 0.9M 13W
- Ref Price:
-
$7.46
/ pc
- Loading Port:
- Shenzhen
- Payment Terms:
- TT
- Min Order Qty:
- 10 Pcs pc
- Supply Capability:
- 100000 Pcs Per Month pc/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
