CY-D Fully-automatic stretch blow moulding machine CY-D2-2
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 30 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Chenyu Packing is a professional company specializing in R & D, manufacturing, technical service and sales of beer and beverage packing machinery.
Among the products, RCGF series, CGF series, DCGF series bottle packing and QGF series barrel packing beverage production lines and QHS series beverage mixer are all designed and made on the base of importing the advanced technology from German, Italy and Japan and its technology keeps the same level as international.
Also the company provides technical consultation, factory planning, installing and adjusting technological train and other services.
CY-D Fully-automatic stretch blow moulding machine:
Usage:
CY-D series full-automatic pet bottle blow molding machine is the most stable two-step automatic stretch blow molding machine. It has one to four cavities and the maximum size of the bottles is 2L, and the maximum capacity is 3800pcs per hour. It can blow bottles in shapes: carbonated, mineral, pesticide, cosmetics, wide-mouth, hot filling, and other packing containers, which is made of plastic of crystalline type, such as PET and PP etc.
Main Technical Parameters:
TYPE | ITEM | CY-D2-1.5 | CY-D2-2 | CY-D3 | CY-D4 |
CONTAINER | Number of cavity | 2 cavities | 2 cavities | 3 cavities | 4 cavities |
Theoretical output | 1800-2500 pcs/hr | 1700-2400 pcs/hr | 2400-3200 pcs/hr | 2800-3800 pcs/hr | |
Max.container volume | 1.5L | 2.0L | 1.5L | 1.5L | |
Max.neck diameter | 38mm | 38mm | 38mm | 38mm | |
Max.container diameter | 90mm | 105mm | 90mm | 105mm | |
Max.container height | 330mm | 330mm | 330mm | 330mm | |
ELECTRICAL SYSTEM | Number of lamp | 32pcs | 32pcs | 40 pcs | 52 pcs |
Max.heating power | 48kw | 48kw | 60kw | 78kw | |
Installation power | 51kw | 51kw | 63kw | 63kw | |
Actual power consumption | 16kw | 16kw | 20kw | 24kw | |
AIR SYSTEM | Operatating pressure | 7kg/c㎡ | 7kg/c㎡ | 7kg/c㎡ | 7kg/c㎡ |
Low pressure consuming | 1100 Ltr/min | 1100 Ltr/min | 1400 Ltr/min | 2000 Ltr/min | |
Blowing pressure | ≤40kg/c㎡ | ≤40kg/c㎡ | ≤40kg/c㎡ | ≤40kg/c㎡ | |
High pressure consuming | 2000-2500Ltr/min | 2000-2500Ltr/min | 2000-3000Ltr/min | 3000-3500Ltr/min | |
CHILLER WATER | Operating pressure | 5-6 kg/c㎡ | 5-6 kg/c㎡ | 5-6 kg/c㎡ | 5-6 kg/c㎡ |
Temperatuer | 10℃ | 10℃ | 10℃ | 10℃ | |
Consuming | 5600kcal/hr | 5600kcal/hr | 7600kcal/hr | 7600kcal/hr | |
Flow rater | 30Ltr/min | 30Ltr/min | 45Ltr/min | 45Ltr/min | |
MACHINE | Machine dimension | 3.0×1.7×2.0 | 3.0×1.7×2.0 | 3.0×1.7×2.0 | 2.1×1.9×2.0 |
Machine weight | 2.5ton | 2.8ton | 3.0ton | 3.2ton |
- Q: What is the design basis of automated packaging?! Just for today!
- 1. each manipulator is controlled by a single computer. A packaging machine for the completion of complex packaging operations, the need to be completed by a number of robot hand. When the package is completed, the information is monitored and controlled by the computer controlled camera, and the manipulator completes the required actions according to the instructions of the computer program to ensure the quality of the packaging.2. high resolution of material and thickness. In the packaging process, the thickness and material change in packaging materials is not easy for the human eye to identify changes in the design of packaging machinery is often used by the computer control of the camera and the detector to identify the thickness of packing material and material. The camera has now been developed to automatically check and identify pictures of the camera and display it on the screen. At present, the machine in the processing speed can not be changed, the future should be based on the change of the material through discrimination can change the speed, so as to control the work in the optimal state, complete the packaging process in the shortest time, and realize the automatic cleaning, automatic sterilization and automatic cleaning
- Q: What are the main plastic forming processes?
- 3. cold pressing molding. Cold pressing molding is also called cold pressing sintering molding. The difference between the cold press molding and the ordinary compression molding is that the material is pressurized and molded at room temperature. The mold after release can be heated or cured by chemical action. This method is used in the forming of polytetrafluoroethylene and some high temperature resistant plastics (such as polyimide, etc.). The general process is three steps of billet sintering cooling.4. transfer molding. Transfer molding is a molding process for thermosetting plastics. When molding, the mold is heated and softened in the heating chamber and then pressed into the mold cavity where it has been heated. According to the different types of transfer molding equipment form: trap type; the tank; the piston.The requirement of plastic molding for transfer molding is that the plastic should have a greater fluidity before reaching the curing temperature, and the curing rate must be faster at the curing temperature. Phenol, melamine, formaldehyde and epoxy resins can meet this requirement.Transfer molding has the following advantages: less waste edge products, can reduce the processing quantity; second molding with fine or brittle insert and perforation of the products, and can keep the insert and the hole position is correct; the product performance is uniform, accurate size, high quality; the mould wear small. The disadvantage is that the manufacturing cost is high compression mold die; the plastic loss; the fiber reinforced plastics for fiber orientation and anisotropy; and around the insert around the plastic, sometimes due to melting is not strong and make the products according to the strength reduction.
- Q: What are the packing machines?
- Heat shrink packaging machine, mask packaging machine, pillow type packaging machine, food packaging machine, I suggest you can go to see
- Q: What machine does the packing carton machine have?
- Since its establishment, the company has continued to provide specialized packaging equipment and transportation equipment for domestic first-class enterprises, as well as perfect solutions for automated transportation systems.
- Q: Food packaging process is not standardized, there is no responsibility?! For example, after the production of candy, because there is no corresponding packaging equipment, the need for artificial packaging
- You can send me a picture of your product and the process, so that I can answer your question exactly. More than 70% of the candies on the market are now automatically packed.
- Q: How much is the tableware wrapping machine?What's the price of the tableware wrapping machine?
- Tableware packaging machine machine standard price of about 38000, excluding tax, tableware packaging machine is designed for tableware (e.g., chopsticks, bowls, dishes and so on) a modern packaging machinery packaging, this machine is mainly composed of conveyor, packaging machine, output machine, shrink machine, composed of four parts.
- Q: How is the production and characteristics of ceramic wall tiles different from the size and performance of molding?
- Ceramic wall and floor tile is a special term used in building ceramics industry. It refers to the ceramic tile used for paving internal walls, exterior walls and floors.It includes:Glazed tiles: white glazed tile, colored shaddock tile, embossed glazed tile, mottled glazed tile, patterned glazed tile, mural glazed tile.Floor tile: paving brick, red floor tile, ceramic mosaic tile (ceramic mosaic), ladder brick.The exterior wall tiles, glazed tiles, glazed tiles, imitation brick, brick from #.
- Q: What is the working principle of the pillow packing machine?
- Some packaging machinery manufacturers, many varieties of products, in the purchase of packaging machines, I hope a device can pack all their own varieties
- Q: What does the mechanical equipment include?
- Hydraulic lifting track machineHydraulic tamping machine, rail sawing machine, rail machine
- Q: Food, equipment, tools, containers, packaging materials, etc. shall comply with food safety standards or requirements
- 5009.101 determination of antimony in polyester resins and their moulding products for food containers and packaging materialsGB 13113 hygienic standard for polyethylene terephthalate moulding articles for food containers and packaging materials
Send your message to us
CY-D Fully-automatic stretch blow moulding machine CY-D2-2
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 pc
- Supply Capability:
- 30 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
