CNBM, Concrete pump rubber hose, ISO9001:2008, Black NR and BR synthetic rubber
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 100000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Quick Details
· Place of Origin: Hebei, China (Mainland)
· Brand Name: CMAX/CNBM
Packaging & Delivery
Packaging Details: | Package: plastic films, then wrapped with fabrics |
Delivery Detail: | According to the Quantity |
Specifications
Specifications
High Quality Concrete Pump Delivery Rubber Hose
1.high quality
2.ISO9001:2008
3.reasonable price
1. Material: Black NR and BR synthetic rubber .
2.Reinforcement:Spiral textile/steel wire.
3. Widely application: Schwing PM SANY Zoomlion and other brand concrete pump trucks.
4.Cover:Abrasion resistantant,heat and ozone resistant.
5.Inside diameter:50-152mm
6.Working pressure:8.5 MPA.
7.Detailed specification:
No | Description | ID | OD | Plies | Working Pressure | Burst Pressure | Weight |
1 | 2 inch | 50mm | 70mm | 2 | 8.5MPA 1200PSI | 20MPA 3000PSI | 3.5kgs |
2 | 2.5 inch | 63mm | 88mm | 2 | 8.5MPA 1200PSI | 20MPA 3000PSI | 4.9kgs |
3 | 3 inch | 76mm | 102mm | 2 | 8.5MPA 1200PSI | 20MPA 3000PSI | 6.5kgs |
4 | 4 inch | 100mm | 130mm | 2 | 8.5MPA 1200PSI | 20MPA 3000PSI | 9.3kgs |
5 | 5 inch | 125mm | 155mm | 2 or 4 | 8.5MPA 1200PSI | 20MPA 3000PSI | 10.9kgs |
6 | 6 inch | 152mm | 184mm | 2 | 8.5MPA 1200PSI | 20MPA 3000PSI | 13.3kgs |
- Q: What is the difference between the precast beam of the bridge and the method of pulling out the rubber tube after pouring the concrete? What's the difference between design and calculation?
- Construction process, in order to avoid concrete into bellows, influence later wear steel strand, construction units generally use PVC and other rubber tube into bellows, in order to double insurance, don't let concrete into. Its length is certainly larger than the length of bellows (750mm at one end for easy operation)
- Q: Can the spring hose joint be connected to the tap?
- Two treatment1 if Water Leakage can choose to replace the elbow elbow, the best selection of true Shide profiles or fittings2 if the ground is Water Leakage, nine in ten was a cause of the pipe in the ground before the hot melt glue of the elbow. Then have to ask the property or a professional plumber to weld.
- Q: Why should the high pressure hydraulic tube peel off the outer skin?
- High pressure hose is generally relatively thick, there are steel wire layer, the purpose of peeling is to connect the tooth and steel layer close combination, the joint is more solid. But not all high-pressure hose needs peeling. Now many large companies do not need peeling. For example, pike.
- Q: What is a rubber core pulling method?
- When using the core pulling method, the hole is usually made of 5 - 7 layers of canvas and 6 - 7mm thick rubber tube. The hose can be used for retaining the straight lines, curves or broken lines.
- Q: Classification of metal hoses
- Corrugated metal hose (abbreviated bellow) is a kind of high quality flexible pipe in modern industrial pipeline. The utility model is mainly composed of a corrugated pipe, a net sleeve and a joint. The inner pipe of the utility model is a thin wall stainless steel corrugated pipe with a spiral shape or an annular waveform, and the mesh cover of the outer layer of the corrugated pipe is made of stainless steel wires or steel strips according to certain parameters. The joint or flange at the ends of the hose is matched to the connector or flange of the customer's pipe.
- Q: How can the soft joint of the pipe be elongated during use?
- When the old pipe replacement of new products, old pipelines have the original pipeline flexible joint elongated, elongated here not just elongated, but when the pipeline working every day to pull long, long time, deformation is big.
- Q: The difference between the rubber pipe and PE pipe?
- The appearance of the native HDPE is milky white and is somewhat translucent in the narrow cross section. PE has excellent properties that are resistant to most life and industrial chemicals. PE pipe welding, butt welding of PE pipeline, the method provides the highest reliability and the diameter of the range and pressure process: the end of the heating tube, using a tool called mirror contact pressure and temperature under the definition of "". The ends are contacted rapidly and remain under pressure during cooling. A medium density polyethylene pipe and PE pipe with high density polyethylene pipe. Divided into SDR11 and SDR17.6 series according to the wall thickness. The former is suitable for transporting gaseous artificial gas, natural gas and liquefied petroleum gas. The latter is mainly used to transport natural gas.
- Q: How should we distinguish between the silicone hose and the rubber tube?
- Smell, silicone no flavor, rubber flavor, silicone general flexibility better, rubber mechanical better
- Q: Are the bridges, bellows and rubber tubes drawn out or are they drawn only? And the bellows are tensioned with the steel strand?
- The bellows are buried inside the component and do not need to be pulled out. Through reinforcement, only pre-stressed, without tension bellows. When tensioning anchor is completed, grouting work is necessary.
- Q: Is rubber tube harmful to drinking water?
- If it is a constant water, okayIf you are in the tube for a period of time, it is best to put on the water, then, after all, rubber is not a food container, some of the inside material will gradually dissolved
Send your message to us
CNBM, Concrete pump rubber hose, ISO9001:2008, Black NR and BR synthetic rubber
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 kg
- Supply Capability:
- 100000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords