Bearings four row cylindrical roller, model FCD2230120
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Bearings four row cylindrical roller, model FCD2230120
Four row cylindrical roller bearings
Four row cylindrical roller bearing is usually use in rolling mill’s work roll or back-up roll. It mainly take much radial load, which is extensively used on the work roll of wire rod mill, section mill and bloomer mill , as well as the back-up roll of dressing machine, cold rolling mill and hot rolling mill.There are three kinds of structures: FC, FCD, FCDP. There are three grades for tolerance : 0 , 6 , 5.
FC： double outer ring, single inner ring, inner ring without rid;
FCD： double outer ring, double inner ring, inner ring without rid;
FCDP：double outer ring, double inner ring, inner ring without rid
★ Product Features:
The rollers of the cylindrical roller bearing are usually guided by two flanges of a ring.
Because this assembly part composed of cage, roller and guide ring can be separated from
another ring, the cylindrical roller bearing belongs to separable bearing. This type of bearing
can be easily mounted and dismounted. Its advantages are obvious especially when there is
interference fits between the inner, outer ring and the axis, housing.
This bearing is usually subjected to radial load, only the single-row bearing with inner& outer
rings flanges can bear small steady axial load or great intermittent axial load. It has a high
requirement on the processing of the fitting parts such as axis and housing bore, etc.
★Product Application:
Cylindrical roller bearings are mainly used for:
- Iron and steel metallurgical industry
- medium and large motor
- generator
- combustion engines
- gas tuibine
- machine tool spindle
- speed reducer
- loading and unloading machinery and all kinds of industrial machinery
Four Cylindrical Roller Bearings Catalugue
- Q: KOYO cylindrical roller bearings, //KOYO cylindrical roller bearings, how to determine the accuracy level?
- The allowable deviation of 1, the inner and outer diameter, width and the width of the assembly allowable deviation 2, roller diameter and the outer round round in group 3, the diameter of the chamfer size bounds value 4, the width of the allowable rotation accuracy (momentum and rotating body beating related projects) 1, inner ring and the outer ring allows for radial and axial beating 2, inner ring 3, allowing the lateral runout of outer surface inclination to allow changes in volume 4, the thickness of the thrust bearing raceway permissible variation
- Q: Which column roller bearing brand is good?
- Foreign SKF is better, the domestic is Kazakhstan axis, and then is Taiwan's Rui Rui, you can look at yourself, they recently in the Qingdao market to great influence, you can understand.
- Q: Double row full cylindrical roller bearings, NNCF5008 installation, we need to pay attention to the direction of it?
- Double row cylindrical roller bearings have no directionality, so they do not need to pay attention to the direction! However, it should be noted that the inner ring and outer ring should be positioned separately to prevent axial movement!
- Q: What is the limit speed and rated dynamic load of NSK full M40-19g cylindrical roller bearings, HTF?
- D - tapered roller bearings with a contact angle of 28 degrees. C, CA (with solid brass cage), CD (with stamping cage), spherical roller bearing with high load. E -- high load cylindrical roller bearing. H - thrust roller bearing high load. J - tapered roller bearings of the outer raceway, the small end diameter, angle, outer ring width is consistent with the provisions of ISO. (2) material G - ring, rolling body is carburizing steel. H - ring, roll for stainless steel. (3) holder M - copper alloy solid cage. T - synthetic resin cage. W - press holder. V - no cage. (4) sealing ring, dust cover Z, ZS - one side with steel plate dust cover. ZZ, ZZS -- dust cover for two side steel plate. D, DU - one side contact rubber ring. DD, DDU -- two faced contact rubber ring. V - one with a non-contact rubber ring. VV -- two side non-contact rubber sealing ring. (5) ring shape K - taper hole, taper 1:12. K30 -- taper hole, taper 1:30. E - there is a notch or oil hole in the ring. E4 - oil tank with oil holes on the outer ring. N -- outside outer diameter band stop groove. NR -- outer ring, outer band, stop groove, stop ring.
- Q: Attention problems of cylindrical roller bearings
- 1. The installation of bearings must be carried out in a dry, clean environment. Before installation, the machined surface of the shaft and shell, the shoulder end, the groove and the joint surface shall be carefully inspected. All mating surfaces must be carefully cleaned and removed, and the cast surface must be clean. 2, before the installation of bearings, should be cleaned with gasoline or kerosene, dry after use, and ensure good lubrication, bearings generally grease lubrication, oil lubrication can also be used. Grease lubrication, grease, anti rust, extreme pressure and other excellent greases should be used. Grease filling capacity for bearings and bearing box volume of 30%-60%, should not be too much. Double row tapered roller bearing and water pump shaft bearing with sealing structure have been filled with grease, which can be used directly by users and can not be cleaned again. 3, bearing installation, must be applied equally in the circumference of ferrule end face pressure to press into the ring, and may not directly tap bearing end face to the top tool, so as not to damage the bearing. Small amount of interference in the case, at room temperature can be used to suppress sleeve bearing ring face, beating with a hammer sleeve, the sleeve will be pressed into the ring balance. If installed in large quantities, use hydraulic press. When pressing, the outer end surface of the outer ring and the outer shoulder of the shell face shall be ensured, and the inner ring end face is tightly pressed with the shoulder end of the shaft platform, and no gap is allowed.
- Q: My notes is the former has a taper hole on the cone position preload, the latter is a nut. But the online information seems a little different. Are the preload methods for two direction thrust angular contact bearings and angular contact ball bearings the same?
- Dissimilarity！ The former is mainly used as the support of the shaft with larger load. The main prevention is the radial runout, which is usually used individually, so there is not much demand for the preload.
- Q: Cylindrical roller bearings NUP2311E mounting dimensions: Da (max): 69Da (min): 64DB (min): 72DC (min): 80Da (max): 111What are the specific meanings of these dimensions? Thank you, master
- I don't know what you mean. The size of NUP2311E is: inside diameter, 55mm, outside diameter, 120mm height: 43
- Q: What is called a semi convex roller, a fully convex roller, a logarithmic curve roller?
- The logarithmic curve roller is also a convex roller, which belongs to a full convex roller;The shape roller refers to a roller which has a slight modification to the diameter of the outer end of the roller to prevent the stress concentration at the end of the contact between the roller and the raceway.The corresponding types of bearings are cylindrical roller bearings and tapered roller bearings. Modified roller and convex roller have been widely used in domestic roller bearings, which can improve the service life of the products.
- Q: Rolling bearing face to face or back to back on the use of cylindrical roller bearing pairs, the speed limit will be reduced? Please, thank you!
- Cylindrical roller bearings themselves require that the applied speed can not be too high, especially in short axis applications
- Q: Can it be used for axial alignment? Forty-fiveWhat is the function of the flat retaining ring of NUP cylindrical roller bearings with flat retaining rings? Can it be used for axial alignment?How much axial force can I bear then?You are the ZWZ? Can you make a friend?!How much axial force can you bear? Do you have a formula or a recommended value?NUP is needle roller bearings, brothers, I dialed the wrong number:What is the function of the flat retaining ring of the needle roller bearing with flat ring NUP? Can it be used for axial alignment?There seems to be no experts here, all mixed up
- What is the function of the flat retaining ring of NUP cylindrical roller bearings with flat retaining rings?Used for more loose transition fit, so that the disassembly and assembly, to play an axial positioning and to bear axial thrust
Send your message to us
Bearings four row cylindrical roller, model FCD2230120
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 500 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
