12V Smd Aluminum Hard Led Strip Rigid Led Bar 5050 Warm White/White/Cold White/Rgb 60Led/M
- Ref Price:
-
$1.03 - 2.06
/ m
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 100 Meters m
- Supply Capability:
- 100000 Meters Per Day m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
General Introduction
12V SMD Aluminum Hard LED strip Rigid LED bar 5050 warm white/white/cold white/RGB 60led/m 300led
Specification
1.Light source: SMD 5050
2.LED Qty: 60leds/m
3.Color: Warm white/white/cold white/RGB
4.Beam Angle: 120°
5.Work Voltage: DC12V, 24V
6.Work temperaturer: -20 C~+ 50 C
7.PCB color: White
8.Packing: 5m/roll
9.Lifespan: 50000Hours
| SD-LRS-5050-60led | LED RIGID Strip | 1.PCB Size: L1000*W15*T7mm 2.Lumens:30-50LM/led*60led/m=1800-3000LM/Strip 3.Color Temp.:2700K-9000K/CW,White,WW 4.LEDs Distance: 12mm 5.LED QTY & Type: 60PCS SMD5050 6.Voltage/Current: DC12v or 24V/0.9A 7.Adding 151Ω resistance to limit the current of each row (3 LEDs/Row) |
Advantage
1.Pretty appearance as quality
2. 70%-80% energy-saving
3. Long lifespan(50, 000H)
4. Fashion design and different types
5. Easy to install and use
6. No risk of mercury emission, environmental protection
Feature
1) .Use life is 50000 to 100000 hours, 10 times than ordinary energy-saving lamps long service life, even the incandescent light bulb life 50 times.
2 ).Power consumption than traditional Lantern Festival 50 ~ 90% can,
3).High luminous efficiency
4).No ultraviolet ray and radiation, the light is no heat, no radiation
5 ).The light penetrating extremely, stereo sense is strong, to improve the grade of jewelry, great show jewelry value.
6 ).Safety: work current. In human safety voltage range.
7 ).The green environmental protection: waste recycling, no pollution,
8 ).Extremely light color rendering: lamps colour temperature value from 2600 K to 10000 K (warm white, natural white, is white, cold white optional) according to different types of jewelry in a specific configuration, the maximum highlights the value of jewelry.
Application
1). Architectural decorative lighting
2). Advertising board lighting.
3). Auditorium walkway lighting
4). Stairway lighting & decoration
5). Border/contour lighting
6). Emergency & security lighting
7). Under-cabinet light , cove lighting
8). according to different types of jewelry in a specific configuration, the maximum highlights the value of jewelry
Cool white :diamond lighting
White:diamond and Jade ,silver ornament lighting
Warm white:gold ornament lighting
Our Services
1. For all your inquires about us or our products, we will reply you in detail within 24 hours
2. We own well-tranied and passional sales & after sale services who can speak fluent Engligh language.
3. We offer OEM services. Can print your own logo on product , can customize the retail box packing and other things.
4. We have very experienced R&D engineers and we have strong ability to do ODM projects.
About us
We are looking for Agent in the world and we are willing to offer ODM & OEM service for our customers. It's our great honor to cooperate with you based on equality and mutual beneficial.
Packaging & Delivery
Package:
1 x Box
Delivery:
Shipping Service | Estimated Delivery Time |
DHL | 2-8 business days |
FedEx | 3-8 business days |
TNT | 2-10 business days |
UPS | 1-7 business days |
EMS | 6-14 business days |
ePacket | 7-12 business days |
China Post Air Mail | 7-15 business days |
China Post SAL | 14-30 business days |
By sea | 30-40 business days |
1. 3-10 business days for Sample Orders; 7-40 business days for Bulk Orders.
2. "Business days" means Monday-Friday, excluding holidays.
3. DHL and UPS cannot ship to military or P.O. boxes address.
4. The Shipping Service above is for reference only, for any other questions, please feel free to contact us.
- Q: LED lamp belt, why turn off, still bright, seek expert solution
- Because of your LED light line, the switch control (off) is zero line. You might as well see if there are any other fluorescent lights or LED lights off at home. If there is, the bus FireWire and zero line exchange, and if only this one, then the LED lights line for FireWire and zero line swap, this phenomenon will disappear.
- Q: LED lamp with frequency converter burn, what's the matter?
- In the inverter power supply, the inverter input special filter, or inverter input dedicated reactor to try.
- Q: LED can the band be cut at will?
- Each of the 3 LED lamp 12VLED lamp with a module, modules can be arbitrarily cut.
- Q: LED lights with 0-10V dimming when flashing what reason?
- The main reason for stroboscopic is frequency, and nothing to do with itYou can't adjust the voltage directly by using the common transformer to adjust the voltageThe best dimming method for LED is the PWM, which is actually frequency modulatedLED is not realistic to want to be completely strobe, but the average frequency is above 100HZ, you can't feel the strobe completelyYou use a transformer to tune, the supply or the city's standard 50HZ frequency, 50HZ must have strobe, but some of the lights may not be too obvious, and some obviously.So, if you want to sit with LED lamp dimming, recommended to buy a dimmer, the price may be relatively high, to hundreds of yuan, if your light load is not large, buy a large manufacturer of the wireless light, with remote control, an estimated more than 200.
- Q: Led how should I choose the light belt?
- There are many kinds of lights: LED flexible band, LED hard light strip, LED rainbow tube, can be called "light strip" or "light belt", I will talk about flexible lamp belt selection method:Look at this lamp with FPC, is also the circuit board, now a lot of businesses in order to save costs, the single copper has to do such a lamp with a long time, severe fever, LED life, is only a single panel you can see the back line (no LED this surface is smooth, the color is uniform) 2, double sided board have a line, a line of local color is deep, hands feel thick
- Q: Why is the LED patch band always flashing?
- Power supply is not enough, can not often indirect, otherwise the power will burn.
- Q: What kind of LED lights are useful to power adapters? How many volts power adapters are used in general?
- The adapter output voltage varies according to the type of the LED lamp. Usually between 3 volts and 80 volts. LED portable light, LED lamp holder and other power adapter output voltage is 5 volts, you can directly use mobile phone charger instead. LED, advertising lights, etc., need higher voltage, or even reach 80 volts.
- Q: What's the LED band?
- The light belt is the abbreviation of the LED light belt. Most people are not accustomed to the noun when they say it is too long, so the LED in front is omitted. It is called the light belt directly. In this way, the band with the name also includes a lot of big, second line, big three lines, round, second line and so on, the direct use of wire to connect LED, instead of FPC or PCB old band, of course, also includes flexible light band and hard light belt
- Q: My living room, I do not want the ceiling can use LED lights? How can we install it?
- LED light belt with double-sided adhesive tape, you can tear off stickers, affixed to the need to install the place, and press the hand can be flat.
- Q: LED lights with a connector, at most can bring a few meters of band
- Low voltage light bar is not more than 10 meters, usually 5-7 meters, because too long the current will not go, the back and front of the lamp brightness will not be consistent, if it is high voltage light bar, the length is 100 meters. The connection of the light bar depends on how many watts it takes to work out how many strips.
Send your message to us
12V Smd Aluminum Hard Led Strip Rigid Led Bar 5050 Warm White/White/Cold White/Rgb 60Led/M
- Ref Price:
-
$1.03 - 2.06
/ m
- Loading Port:
- Shenzhen
- Payment Terms:
- L/C,T/T
- Min Order Qty:
- 100 Meters m
- Supply Capability:
- 100000 Meters Per Day m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
