6mm width Strip 2835 DC 12V 300leds bendable led strip for corner of letter
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 500000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
6mm width strip 2835 12V 300leds bendable led strip for corner of letter
Item: BL-SF-H2835-WW/NW/CW/R/G/B/Y -300
Bendable led strip Specfications:
Product name | LED sign light |
Part number | BL-SF-H2835-WW/NW/CW/R/G/B/Y-300 |
Inpute Voltage | DC12V |
Power/m | 14.4w/m |
Rendering Index | >80Ra |
Working Temperature | -20+60°C |
Frequency | 50-60HZ |
Humidity | <85< span=""> |
Power Factory | >93% |
Brightness | 300x24lm |
Lumen decline | <2% Per 1000hs |
Dimension | width:6mm length:5m/reel |
LED quantity | 60LEDs/m |
bendable led strip Features:
1.Use the super brightness SMD2835 LED chip as as lighting source.
· 2.300 super brightness 2835 LED/5M.
· 3.Size:5000X6MM
· 4.Available Warm white/Natural white/Cool white
· 5.Input Voltage :DC12V
· 6.Max power :72W
· 7.Can be cut by 3 LEDs and connect again by our accessories.
bendable led strip Parameter:
bendable led strip Advantages:
1) Continuous length flexible LED light strips
2) 5 meters/roll, cuttable every 5cm
3) Runs on 12-volt systems like solar cell charged batteries
4) Super bright SMD top LED
5) Solid-state, high shock or vibration resistant
6) Major reduction in power costs
7) 120-degree wide angle illumination
8) No RF interference
- Q: LED the band is cut off in the middle. Is it still bright ahead?
- LED flexible lamp belt over extrusion products, resulting in LED flexible light chip damage, or solder joint deformation off and not bright
- Q: How many light slots should I leave for the LED light belt?
- This size is OK, but LED and T are different, so you should put the line from the top to the bottom, because each LED has to connect to the power alone, and the T4 and T5 can be connected
- Q: How to solve the problem of LED lamp heating problem?
- The heat of the LED bulb is introduced here, because any LED can be made into a lamp, so the heat generated by the LED chip is always removed into the air through the housing of the lamp. If the heat dissipation is not good, because the heat capacity of the LED chip is very small, the accumulation of a little heat will make the chip's junction temperature rise rapidly. If the long time work in high temperature state, its life will soon shorten. However, these heat can really lead the chips to the outside air and go through many ways.
- Q: Can different color LED lights come together?
- 1) Yes, as long as the conventional 5 meter roll of light bars, the voltage is DC 12V, can be connected together;2) just the color of the light bar is different, the color after the light is not the same, depending on your actual needs;3) the same power cord in series together with the light bar, the longer the connection, the back is not bright, generally not more than 2 volumes as well.
- Q: How does the LED light band connect the dimmer controller?
- The LED light belt needs to be connected with a drive with dimming function. This can be connected to the dimming controller via the signal line.
- Q: What happens if the 12vled lights are connected to the 24V transformer?
- Light emitting diodes, referred to as LED. Made from compounds containing gallium (Ga), arsenic (As), phosphorus (P), nitrogen (N) and so on. When electrons and holes are combined, they can radiate visible light, so they can be used to make light-emitting diodes. In circuits and instruments, as an indicator, or in combination with text or digital display. GaAs diodes glow diode gap, green silicon carbide, yellow light diode, light emitting diode gan. Because of the chemical properties and organic light-emitting diode OLED and inorganic light-emitting diode LED.
- Q: What kind of material does the light belt have?
- Later developed into a flexible circuit board is used FPC as carrier, because of its simpler processing technology, quality is easier to control, longer life, higher brightness and color and gradually replaced the earlier process, become the trend.Because the lamp belt is generally welded LED, so there are many LED lights, but because the noun is too long and simplified into a band
- Q: Which of the 12 volt LED light band and 220 volt LED lamp is brighter? What's the difference in electricity costs? Want to use it in the mall counter, 12 volts
- First of all, I doubt this lamp seller really understand it, can use 12V lights with constant voltage power supply 12V, you do not know this lamp with 1 meters is the number of W, generally 1 meters 30 meters 10W, that is 300W, you can buy a 300W constant voltage power supply, positive and negative with positive and negative light with constant voltage output, is very simple, do not worry about the brightness of the problem, as long as you do not exceed the constant power load. As you said, 220V lights, 220V lights directly connected with no real meaning, is the need to add an adapter in front of the adapter is 220V, this adapter is actually a driver.
- Q: Connect the LED light belt to change the electric wire!! the result electrify! The electric wire heating, the interface is electric hot, how to return a responsibility?
- Changed the wire and wire heating, mainly the current rating of the wire is too small, that is to say, the line is too thin. The main reason for the junction fever is not connected, not tight, so a contact resistance, resulting in fever.
- Q: How much band wavelength does LED blue light have?
- The light varies at different wavelengths, probably around 463-475nm.Light emitting diodes, referred to as LED. Made from compounds containing gallium (Ga), arsenic (As), phosphorus (P), nitrogen (N) and so on.
Send your message to us
6mm width Strip 2835 DC 12V 300leds bendable led strip for corner of letter
- Loading Port:
- Shekou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m
- Supply Capability:
- 500000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords