2.0 Litre Stainless Steel Electric Kettle with Boil-dry and overheat protection
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
2.0 Litre Stainless Steel Electric Kettle with Boil-dry and overheat protection
Descriptions:
² Stainless Steel body
² 360 degree cordless kettle
² Concealed stainless steel heating element
² Automatic switch off
² Boil-dry and overheat protection
² On/off switch with LED light
² Transparent water window
² Cord storage
Specification & Packing information:
Power | 1000~1200W,1850~2200W |
Voltage | 110~130V, 220~240V |
Frequency | 50/60Hz |
Capacity | 2.0L |
N.W per pcs | 0.85Kg |
G.W per pcs | 1.05Kg |
N.W per carton | 12.5Kg |
G.W per carton | 13.5Kg |
Inner packing measurement | 18X18X24.5CM |
Outer packing measurement | 55.5X37X51CM |
Qty per catron | 12pcs/ctn |
Q'ty.20'/40'/40'HQ | 3264/6432/7680PCS |
- Q:Electric kettle heating, but not heating, what's the matter?
- If it is a heating tube, electric kettleFirst, the power line shows that the primary circuit is good. It should check whether the wiring of the heating pipe is loose or not;Second. Check whether the connection of the five rings of the kettle base is looseThird. Use a multimeter to measure the voltage at the ends of the heating tube. If there is a voltage input, the heating tube is burnt out,
- Q:What is the principle of electric kettle heating?
- The working principle of the electric kettle is: double metal sheet using water vapor from the boiling water to steam temperature components of the deformation, using deformation based on the principle of lever push the power switch, so that the electric kettle is automatically turned off after the water boil. The power failure is not self reset, so the kettle will not automatically reheat after power failure.
- Q:The electric kettle temperature control switch is broken. How can I fix it?Can't fix it!
- After heating, the indicator light does not turn onThe fault is often caused by power supply without adding electric heating tube circuit. When overhaul resistance of R * 10 with a multimeter measuring gear base power line 3 core plug L and N ends. Normally, without pressing the reset switch when the resistance is infinite, press the button when the 1500W electric kettle corresponding resistance is 32 ohm. If you press the button for resistance with heating of the tube can be measured. This circuit not pot body 3 core plug N, L resistance, the normal value above. If measured normal results, show that the fault in the base part, should check the power line and the base socket connection is broken or poor contact, a simple structure in general, can quickly find the fault.If the measured resistance is infinite, the fault in the circuit inside the pot body, should open the handle cover components such as maintenance. Focus on the power supply (reset) switch and switch insulation. Multimeter R * 1 gear check switch action and contact on-off case is good. If it is found that the adverse action, the bending angle can be checked a temperature sensing piece of switch and the connecting rod position is normal, otherwise should carry on correction; if the switch action is normal and the contacts are not connected, indicating switch reed or contact damage, can open the switch box cleaning and maintenance.If the power switch is normal, then the fault occurred in the insulation switch. First look at the bimetal if the reed pressure switch contact rod (Bai Sugan), if the pressure is too tight, it can clamp the bent upward, until the distance between the 0.1mm so far. If the spacing of the bimetal sheet and switch contact rod should be normal. Open the switch box, cleaning and maintenance insulation switch springs and contacts.
- Q:With what kind of electric kettle boil water, no scale?
- First of all, boiling water has scale, is the reason for water quality, the calcium ions in the formation of calcium carbonate precipitation, if you want to reduce the amount of scale recommended, you can add vinegar before the little (acid) can be. It can effectively reduce the scale, or put in boiling water inside the container gourd pulp, also can adsorb scale.
- Q:What method can let the electric kettle on the outer layer of clean oil
- Plastic shell is recommended with detergent or neutral detergent, scrub without dilution, and then rinse with clean water.The inner liner of the electric kettle is used for a long time, and the scale is formed on the surface of the electric heating element, and the service life and heating time of the electric heating element are influenced. Descaling method is to use a brush dipped in sodium bicarbonate, water or acetic acid scrub, brush wash, rinse with water, after drying can be used.
- Q:Is the thermos kettle good? Repeated boiling water, drinking on the human body there is no harm?
- Scale problem, electric kettle certainly will produce scale, but open fire kettle will also. Water dispenser is not clean. Therefore, electric kettle as long as the ground wash, nothing, very clean.
- Q:Why is the price of the electric kettle so cheap?
- Electric kettle prices are cheap, but also expensive, ranging from tens to hundreds of dollars, depending on the brand and materials and production process.
- Q:Amoi electric kettle and electric kettle, which is better
- For electric kettles, sealing and leak resistance are very important. After a period of time, should according to the instructions stated, replace the sealing ring of high-temperature timely (recommended original products), otherwise once the leakage is easy to cause a short circuit fault.
- Q:Why did the electric kettle sound just when it was burning?
- Hot boiled water can certainly drink (like electric kettle, but should pay attention to principle):1 to ensure that the water container and the hot clean, no rust.2 of the water in the container must not overheat quickly, not dry heat quickly, otherwise easy to burn out the heater.
- Q:Is the glass electric kettle practical?
- The glass pot is made of high temperature resistant polymer material glass, transparent, visual, convenient for consumers to observe the situation in the pot. The bottom of the glass pot is directly bonded with an electric heating device, and a protective element is also arranged to avoid a safety accident caused by overheating of the kettle. Some also use silica gel pad and a sealing ring tightly against the bottom of the glass pot body, on the one hand in order to be more convenient to remove and replace the glass pot body, on the other hand can also achieve the leakproof effect, anti high temperature, but also conform to the hygiene standards for drinking.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
2.0 Litre Stainless Steel Electric Kettle with Boil-dry and overheat protection
- Loading Port:
- Guangzhou
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 3000 pc
- Supply Capability:
- 10000 pc/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords