10W Bifacial Vertical Solar Panels Mini Solar Panel Hot Selling CNBM Solar Panel
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 set
- Supply Capability:
- 300000 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Polycrystalline Solar Modules
CNBM offers a range of small, medium and large polycrystalline solar modules, designed for a range of requirements.
Specifications:
+/-3% |
Polycrystalline silicon solar cells (156 x 156mm) |
60 (10 x 6) |
1650 x 990 x 40 |
25.5 |
Limits:
Operating Temperature | -40~+85? |
Storage Temperature | -40~+85? |
Maximum System Voltage | 1000 VDC max. |
Hail Impact | Diameter of 28mm with impact speed |
Temperature and Coefficients:
NOCT | 48C+/-2? |
Voltage temperature coefficient (%/K) | -0.35 |
Current temperature coefficient (%/K) | 0.05 |
Power temperature coefficient (%/K) | -0.45 |
Characteristics:
Model: | SGM-200P | SGM-210P | SGM-220P |
Max-power voltage Vmp (V) | 29.2 | 29.4 | 29.41 |
Max-power current Imp (A) | 6.85 | 7.14 | 7.48 |
Open-circuit voltage Voc (V) | 36.5 | 36.69 | 36.9 |
Short-Circuit Current Isc (A) | 7.28 | 7.6 | 7.93 |
Max-power Pm(W) | 200 | 210 | 220 |
Model: | SGM-230P |
Max-power voltage Vmp (V) | 29.8 |
Max-power current Imp (A) | 7.72 |
Open-circuit voltage Voc (V) | 37.31 |
Short-Circuit Current Isc (A) | 8.19 |
Max-power Pm(W) | 230 |
STC: Irradiance 1000W/m2, module temperature 25?, AM-=1.5
Poly Crystalline Solar Panels Specifications Range
Maximum Power (Pm) | Dimension | Weight | Operating Voltage (Vmp) | Operating Current (Imp) | Open Circuit Voltage (Voc) | Short Circuit Current (Isc) |
0.45W | 140x80x10mm | 0.08kg | 3.3V | 150mA | 4.6V | 160mA |
1.0W | 162x140x10mm | 0.16kg | 7.5V | 150mA | 10.3V | 160mA |
4.5W | 269x251x23mm | 0.8kg | 16.5V | 0.27A | 20.5V | 0.3A |
10W | 420.1×268.9×22.6mm | 1.92kg | 17.5V | 0.58A | 20.5V | 0.6A |
20W | 425x502x50mm | 3.0kg | 16.8V | 1.19A | 21.0V | 1.29A |
30W | 593x502x22.6mm | 3.9kg | 16.8V | 1.78A | 21.0V | 1.94A |
40W | 655x537x50mm | 5.75kg | 17.3V | 2.31A | 22.1V | 2.54A |
50W | 839x537x50mm | 6.0kg | 17.5V | 2.9A | 21.8V | 3.17A |
65W | 1111x502x50mm | 7.2kg | 17.6V | 3.69A | 22.1V | 3.99A |
80W | 1204x537x50mm | 7.7kg | 17.6V | 4.55A | 22.1V | 4.8A |
- Q: I have a rental property and use a 230-Volt 6-Amp Pool Pump.I would like to use a solar panel to run it when the house is empty, using mains power when guests are here.The building is in the Caribbean so plenty of sun!!I wanted to run it quot;directand not use batteries. Is this possible??What size panel would I need? A DC invertor too??Thanks!!
- Why don't you use the mains as the battery with net metering. That way you don't have to have two pumps, a DC pump for the solar and an AC pump for the mains. A 230 V, 6 A pump draws 3.68 kw. A typical solar panel produces about 400 watts so you would need about 0 solar panels which should run you about $20,000 US. Of course, you may not need to run the pump continuously but in order to use fewer solar panels for sporadic use, you would need the batteries or the net metering. Keep in mind that with the costs of the panels, you will be paying about 38 cents a kwh. Grid power usually costs around 5 cents a kwh.
- Q: What are the different applications for solar panels for residential use? How many should I purchase if the avg panel produces 80 watts .
- For a starter you would look at how many watts you use. And how deep in you want to go. 80 watts at 2volts dc is nice.. But getting it to 20 ac. You will need a good inverter, battery's. There is things that you can replace in your house that will run on 2 volts. Lights fans. But to answer your question you would first have to look at what you use or and what you want to change over. I have got 900 watts of panels and 2700 Amp hours of battery's on one system. That will run all my lights computers and TVs Also on this I have converted a ups for the 20 VAC. I have been working on this for 0 plus years with no plans to finish. ( there is no end for what you can do with the power of the sun)
- Q: I am seriously thinking about installing PhotoVoltais Solar panels (that generate electricity) on my roof. Besides the usual (cost, ROI, etc.), I was researching for the maintenance of these panels. We have tall trees around the house and needles and leaves fall on our roof all the time... not to mention the dirt and grime that collects over time.Do these decrease the capacity of the panels? Do the panels require a regular maintenance?Thanks!
- panels need full sun. any shade reduces out put. leaves left on them will cause the individual cells burn out. they nneed adjusting every season, an washed with a soft cloth once a year.
- Q: I have a home made 24 volt electric cart. It is powered by two 2Volt deep cycle batteries. Since the motor runs on 24 volts the batteries are wired in series to produce the 24 volts. I only have a 2 volt battery charger, but I also have two 2 volt solar panels. It is a pain having to unhook wires, rewire it, or charge them one at the time.HERE IS THE QUESTION REALLY... Can I wire the two 2 volt solar panels together in series (ie: negative to positive) then connect it to the existing 24 volt system and have it charge the batteries fine. I know basic wiring, but I know nearly nothing about solar panels, will it work fine? will it cause them to break? or short out?(additional info, the solar panels are only rated at 5 amps so it will not overcharge the batteries or anything)
- Although I'm not experienced with solar panels, I would say no. if you wire them in series you'll actually be putting voltage through one of the panels. Can't believe this would be good. My suggestion would be to wire one panel to one battery and one panel to the other battery. I really don't believe there's a need to disconnect the batteries from each other. However if you would disconnect the one wire between the two batteries you would be guaranteed safe and I know that would work.
- Q: I hooked up a 2V solar panel to a small relay. The relay switches at 9V. When I have light shining on the panel it puts out aorund 3-4V, but when I hook it up directly to the relay it drops to V and doesn't switch the relay. Why? and How do I fix it?-2V Mono-Crystalline Solar Panel -JWD 7 4 reed relay
- There is no ampere output listed for the solar panel. There is specs indicating the relay has a 200 ohm coil. This means the current required for the relay is 0 ma. The solar panel should supply that much. Check the resistance of the relay coil. It sounds like you have the relay coil in series with another resistance, such as a loose connection or a corroded connection. If you can, disconnect the wires from the solar panel and twist the two wires connected to the relay coil, and read the resistance of the two wires connected at on end. A high resistance will indicate a problem in the wires. TexMav
- Q: Are solar panels recyclable?
- Yes, solar panels are recyclable.
- Q: Can solar panels be used to power a skyscraper?
- Yes, solar panels can be used to power a skyscraper. With advancements in technology, large-scale solar panel installations can generate enough electricity to meet the energy demands of a skyscraper. However, it may require a significant number of panels and efficient utilization of available space to maximize solar energy production. Additionally, energy storage systems can be employed to ensure continuous power supply, especially during periods of low sunlight or at night.
- Q: Can solar panels be used in areas with high levels of shade or obstruction?
- Solar panels are not very efficient in areas with high levels of shade or obstruction as they rely on direct sunlight to generate electricity. However, there are certain technologies and panel designs available that can still produce energy in shaded areas to some extent, although their overall efficiency may be reduced.
- Q: How can solar panels be used for heating water?
- Solar panels can be used for heating water by using the energy from the sun to heat up a fluid, typically water or antifreeze, which then transfers the heat to a storage tank. This heated water can be used for various purposes such as showers, washing dishes, or heating indoor spaces.
- Q: How do solar panels affect the property's carbon footprint?
- Solar panels can greatly reduce a property's carbon footprint by generating clean and renewable energy. Since solar panels generate electricity by harnessing the power of the sun, they do not emit any greenhouse gases or pollutants during operation. By reducing reliance on fossil fuels and grid electricity, solar panels help to offset carbon emissions that would have been produced by traditional energy sources, thus positively impacting the property's carbon footprint.
Send your message to us
10W Bifacial Vertical Solar Panels Mini Solar Panel Hot Selling CNBM Solar Panel
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 10 set
- Supply Capability:
- 300000 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
