Q:What are pneumatic triple parts?

Pneumatic FRL is set 1. oil filter (compressed air filter), 2. valve (through gas pressure regulator), 3. oil mist (oil atomizing), the three functions of air purification of pneumatic components.

Q:Will the gas in the gas path corrode the pneumatic components after passing through the oil sprayer?

The operating principle is that the atomizing oil is lubricated with high pressure air to the pneumatic equipment, and is not corrosive. Although the pneumatic solenoid valve or cylinder is no need to add lubrication. But friction products increase the service life by adding lubricating oil.Gas atomizer does not recommend adding common quality oil. It is recommended to use turbine No. 1 atomizer special oil.

Q:What is the gas in the two pneumatic combination?

GB brand: 7 mechanical lubricants (viscosity about 7E degrees) is also a relatively convenient choice. The oil mist can be ejected into the pipeline about 2M or so. And after the oil mist lubrication, it will be discharged with the valve, not in the cylinder memory.

Q:Graphical symbols for pneumatic componentsThis is a manual valve on the Oh!

This valve works as follows:Manually switch the three control bits, and then switch the valve to locate the valve by the circlip inside the valve bodyLeft function, -1 through 4,2, 3 (marked on the 3 pass 2 is obvious error);

Q:What are the main parameters of pneumatic components?

There are many kinds of pneumatic components. In general, they can be divided into auxiliary components, control elements and actuating elements:Auxiliary components: filters, pressure reducing valves, oil mist, etc., the main parameters are the pipe diameter, flow size, filtering accuracyControl components: mainly electromagnetic valve, the main parameters are voltage, nozzle diameter, bit through function, installation method, flow, single coil or double coil, etc.Pneumatic actuator: the main parameters is the cylinder stroke, installation, installation size, positive reaction, etc.Basic parameters on these, special occasions special treatment

Q:What are the classifications of cylinders in pneumatic components?

The cylinder is one of the most widely used pneumatic actuators in pneumatic systems. Depending on the conditions of use, the structural characteristics of different, the use of different functions, installation of different forms are classified as follows:

Q:Types of pneumatic Triplex Oil

Now most of the cylinder, valve generally in the pneumatic components of the pre sliding parts parts into the semi-solid grease like (or paste oil) called non oil components. Therefore, there is no need to provide oil mist lubrication in such pneumatic transmission. If the oil mist lubrication to non oil pneumatic components, not only has no meaning, and semi solid lubricating grease is very thin oil mist and oil slowly dilute the sealed gas loss is bad. If the oil has been supplied with oil mist, it should remain the same.

Q:I've never touched this piece of pneumatic components. How do I get started?

1, first find the book entry materials gas technology at recommended SMC practical modern pneumatic technology is a book, more user-friendly and comprehensive, clear main pneumatic components, such as filter, solenoid valve, cylinder, understand the use, shape, broadly divided into categories, do not need to look at theory and calculation.2, check the object, in the dealer or factory to see what pneumatic components, focusing on the use of the original, and gradually form the concept of pneumatic systems.

Q:What elements are most common in pneumatic?

Hello, pneumatic components inside the most commonly used 1, pneumatic joints, 2, PU/PE trachea, 3, solenoid valve, 4, cylinder, 5, gas source.

Q:What are pneumatic components?Pneumatic components include:

Pneumatic components include: air treatment system components, pneumatic components (such as cylinder, pneumatic motor), pneumatic control components (such as pressure control valve, directional control valve, flow control valve, pneumatic logic element, pneumatic sensor), pneumatic auxiliary components (such as filter, oil mist for pipes, pipe joints, pipe etc.).