WC67K/Y 160T/3200 brake lining press,manual sheet metal/rebar/acrylic wire bending machine
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 5 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
CNC series hydraulic press brake bending machine
Specifications :
CNC series hydraulic press brake bending machine
1. high performance
2. high quality with good price
3. easy to operation
4. brand:DM
Features:
1. Special numeric-control system is fitted with mainframe of the bending machine .
2. Muti-work-step programming function is able to achieve an automatic operation and continuous positioning of muti-step procedures ,as well as an automatic precision adjustment for positions of rear stopper and gliding block .
3. The hdyraulic press brake bending machine is provided with bend counting function ,for a real time display of processing quantity and power failure memory of positions of stopper and gliding block ,as well as producers and parameters .
4. Imported ball bearing lead screw and linear guide rail are used for rear stopper ,to ensure the positioning precision of rear stopper,for processing precision of machine to be higher .
Servo motorized Backgauge(standard)
-CNC back gauge system with X axis by AC servo motor driven ball screw shafts and on linear bearings with an accuracy of 0.01mm.
-Back gauge has well enough mechanical strength and rigidity with tank-type gauge structure .
-High-precision ball screw and linear guide-way ,Particular finger-stop design ,enlarge the range of back gauge .
Bending depth adjustment and RAM structure :
-The bending accuracy and consistency of the repeatability are achieved by a simple mechanical system of adjustable depth automatic (digital readout )and motorized (DA41 CNC control ) adjustable .
-Can move the ram up slowly ,which allows the operator to control work piece conveniently.
-Universal fixing-surface of the upper tool can be meeting with the clamping requirement of the tool farthest.
-Hardened and ground standard sectioned top and 4V-Die bottom tools (4x1000mm sections)
Techical of the products or the other model you can choose : hydrauli bending machine | hydrauli bending machine
Seri-al NO. | Name | Numerical value | Unit | Remark /Number | |||||
63T/2500 | |||||||||
1 | Bending capacity | 630 | KN | ||||||
2 | Optional NC Control of Y+X axis or Delem DA41CNC Control of Y+X+Manual R axis | ||||||||
3 | Table size length-A | 2500 | mm | ||||||
4 | Distance between uprights-B | 2100 | mm | ||||||
5 | Throat depth-D | 250 | mm | ||||||
6 | Y Axis Slider stroke-C | 120 | mm | ||||||
7 | Max.open height between table and slider-E | 320 | mm | ||||||
8 | Worktable height above the ground-F | 800 | mm | ||||||
9 | X Axis Backgauge Range | Travel Range | 500 | mm | |||||
Max.Speed | 200 | mm/sec | |||||||
10 | Speed of Ram Stroke | High Advance Speed | 100 | Mm/sec | |||||
Working Speed | 5-15 | ||||||||
High Return Speed | 90 | ||||||||
11
| Gear Pump | Type | 10MCY14-1B | ||||||
Norminal Flow | 10 | Ml/r | |||||||
Norminal Pressure | 25 | Mpa | |||||||
12 | Oil Tank Capacity | 170 | L | ||||||
13 | Main Motor | Type | Y160M-4 | ||||||
Power | 5.5 | KW | |||||||
Rotate Speed | 1470 | R/min | |||||||
14 | External(LxWxH) | 2560x1350x2000 | mm | ||||||
15 | Power requirement | 380V (-15%,+15%) 50Hz ,3PH | |||||||
- Q:What are the advantages of cement tile machine?
- advanced and efficient. A new generation of equipment to add a remote control, diagnostic system, thousands of miles away on the operation of the data analysis, so that customers on the equipment maintenance easier.
- Q:The processing method of the tile machine
- Watt plate and tile gap is too large, generally should be 1 ~ 5mm. The gap is too large will make the tile broken, the gap will be bad top tile. The tile tray is raised too fast or jitter. Adjust the corresponding air valve can be.
- Q:What steps are required during the installation of the cement tile machine?
- Host installation: the user in accordance with the size of the foundation map dug the foundation, according to the requirements of the drawings for the foot of the embedded hole or under the embedded iron with concrete pouring, for the installation of embedded holes into the anchor bolts (M24 × 360) and then Grouting, embedded iron can be a one-time cast into the installation and direct welding with the host, based on the plane must be level, the smaller the better the better.
- Q:Analysis on the Problems of Cement Shade Machine
- bad weather; the surface of the problem will be wiped or shovel, Let the cement completely dry; coated with a layer of all-round anti-alkali color tile paint.
1. Manufacturer Overview |
|
|---|---|
| Location | |
| Year Established | |
| Annual Output Value | |
| Main Markets | |
| Company Certifications | |
2. Manufacturer Certificates |
|
|---|---|
| a) Certification Name | |
| Range | |
| Reference | |
| Validity Period | |
3. Manufacturer Capability |
|
|---|---|
| a)Trade Capacity | |
| Nearest Port | |
| Export Percentage | |
| No.of Employees in Trade Department | |
| Language Spoken: | |
| b)Factory Information | |
| Factory Size: | |
| No. of Production Lines | |
| Contract Manufacturing | |
| Product Price Range | |
Send your message to us
WC67K/Y 160T/3200 brake lining press,manual sheet metal/rebar/acrylic wire bending machine
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 5 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
