Truck and Bus radial tyre pattern 386
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 8000 set/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
You Might Also Like
- Q: How often will the tires be replaced?
- The following five conditions need to change:1, tire wear to wear limit mark must be stopped using (ie tread tread depth is less than 1.6 mm).2, tire aging.3, tread deformation or bead damage of the tire, lack of gas, causing the tire side of the tire was crushed, corrosion by chemical tires may not continue to use.4, drum wrapped tires shall not continue to use.5, other damage, if the use of tire safety, may not continue to use.
- Q: 750, can I use the truck tires? The wire has been broken, and one of them has leaked out,
- The so-called "semi steel" and "all steel" difference, half steel refers to the tread area with steel wire as a strengthening layer, the carcass is nylon or polyester material; all steel, in addition to tread, the carcass is all with steel wire to bear the force. The radial tire is relative to the oblique tire. The main material of the supporting force of the diagonal tire (the term frame material) is nylon.
- Q: What kind of car is a solid tire used for?
- The utility model is mainly suitable for special vehicles, such as anti riot vehicles, cash trucks, anti terrorist vehicles, engineering vehicles, forestry machinery, etc..A solid tire is a tire corresponding to a pneumatic tire (hollow tire), and the carcass is solid, with no cord as a frame, without inflating, and no inner tube or air tight layer.
- Q: How often will the pickup tires be replaced?
- According to international regulations, if the tire is used properly, the tire must be replaced when it is worn to a depth of 1.6 mm. Almost all tyres have markings at a depth of 1.6 millimeters. If used normally, the mileage used by ordinary tires is about 5 - 100 thousand kilometers.
- Q: How to identify the specifications of car tires?
- The speed rating indicates the maximum speed at which the tyre carries the specified load under specified conditions.The commonly used speed rating: Q 160 km / h V 240 km / h R 170 km / h W 270 km / h S 180 km / h Y 300 km / h T 190 km / h H 210 km / h Z ZR faster than 240 km / hour, if there is ZR, such as P275/40ZR17 93W, then the highest speed rating ("93W" in "W") is 270 km / h.
- Q: How are the tires classified?
- According to the air pressure can be divided into high-pressure tires, low pressure tires, ultra-low pressure tires.According to the structure is divided into 5 - bias tires and tire:The general characteristics of tire cord fabric layer and buffer layer is adjacent cord cross arrangement, each layer of cord and crown center line into the 350~400 angle, and is called tire. The cushion layer is between the ply and the tread.The ply of a radial tire is arranged at 90 degrees or near 90 degrees across the center line of the tread, and the cord is distributed like the meridian of the earth, hence the radial tire. Between the ply and tread is a band of plies. The angle between the ply cord and the center line of the tread is 10 degrees -20 degrees.From the design perspective, bias tyre has many limitations, such as cord cross strong friction, easy to make the matrix heat, so the accelerated wear tread, and the curtain line layout is not good enough to provide excellent handling and comfort; and irregular steel ribbon in radial tire it has good flexibility to adapt to the impact of the road, and durable, it also means that the fabric structure is much smaller than the oblique line friction in the car, which has long service life and better tread fuel economy. At the same time, the radial tire itself makes it possible for the tyre to have no inner tube. Tubeless tire has a recognized advantages, namely when the tire is punctured, unlike a tubeless bias tyre burst (as this is very dangerous), but to make the tire can maintain pressure within a period of time, improve the safety of driving a car. In addition, the radial tire has better grip ability than the inclined line tire. Because the radial tire has the above advantages compared with the inclined line tire, it is now widely used in the car radial tire.In fact, the direction of tire development is radial tire, tubeless and flat.
- Q: How much gas does the car tire?
- Under normal circumstances, we recommend referring to the pressure specified on the car announcement or the maximum pressure 80-100% indicated on the side of the tire. If you are ready for a long-distance high-speed, please raise pressure 10-15%, to reduce the heat caused by the sidewall flex. In addition, the load capacity of tire inflation pressure is corresponding to it, must be reasonable to determine the tyre pressure according to the load condition of the vehicle, and not according to the change of climate and season to raise or lower pressure.Too high or too low pressure will affect the service life and safety performance of tires. First of all, too high or too low pressure will lead to partial wear of tires and shorten tire life. Secondly, the low pressure is likely to lead to excessive heat generation, structural delamination, cord breakage, and more likely to cause the impact of drums, but also increase oil consumption. The pressure is too high will make the tire increased rigidity, reduce area, thus easily lead to sideslip and spin phenomenon, but also increases the risk by the impact of tire.
- Q: How heavy does a heavy truck tire?
- Tire weight is mainly rubber, usually large pulling coal cars weight 50-55kg
- Q: The car tire is broken. Can I just change it?
- 1. the same specifications, different specifications of the tire, its inflated outside diameter and cross-section width is not the same, mounted on the same axle, the load distribution is not the same.2. the structure of the same tread factor is different from that of the tread and skew, and its cushioning property and circumferential deformation are different. Two kinds of tire installed on the same shaft, the bearing load must not wear, are not the same.3. material same material mainly refers to the carcass cord material. For example, there are great differences of all steel radial tire and radial tire carcass thickness, fiber cord strength, thermal performance, mixed together effect.The 4. level is the same level of tire load level, at the same time to determine the pressure of the corresponding standards, the load capacity of different tire mixed together, the gas pressure is not uniform, the deformation of the tyre is also different.
- Q: How many kilometers can the lorry tire be scrapped properly?
- Package deformationTire deformation is a very dangerous thing, if you find out the deformation of the package, it is best to go to the professional repair shop for inspection and treatment, usually recommend changing tires. This kind of situation shows that the metal coil inside the tyre has been deformed or broken. If it continues to run, it is very likely that the tire will burst.
Send your message to us
Truck and Bus radial tyre pattern 386
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 8000 set/month
OKorder Service Pledge
Quality Product, Order Online Tracking, Timely Delivery
OKorder Financial Service
Credit Rating, Credit Services, Credit Purchasing
Similar products
Hot products
Hot Searches
Related keywords
