Material introduction:

The material is made of three layers of net, two layers of PVC fabric and a layer of polyester fabric in the middle

The first layer: strong PVC fabric

Second layer: polyester fiber net, 50% thicker

Third layer: strong PVC fabric, thick, good sunscreen ability

Installation method:

Easy to install in three steps.

First, spread out the pool. Select a flat area with no slope, check for sharp points, and lay the pool flat on the floor.

Then inflate the top ring. The upper ring of the pool is composed of inflatable rings. Find the inflatable opening of the top ring of the pool and fill it with air and place it into a circle.

Water filling is completed, inflation is finished, confirm that the bottom of the pool is smooth, then water injection, as the water level increases, the pool top ring will automatically float, 80% water can be injected.

Convenient drainage:

The pool has two filter circulation outlets and a side bottom outlet. The filter pump interface can also be used as an outlet. The outlet can also be connected to a pipe to water the garden.