Solder tab ribbon 0.23*1.5mm
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 339 ton kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1、基材参数Base Copper Parameter
铜基材Base Material | TU1 oxygen-free C10200 |
成分含量 Content | CU>99.97% |
导电率 Electrical conductivity | ≥100% IACS |
电阻系数Resistivity | ≤0.017241Ωmm2/m |
2、涂层成分Soldercomposition
涂层成分 Solder Type | 涂层成分比例 Solder composition rate | 单面涂层厚度(mm) Solder Single Thickness(mm) | 涂层厚度公差(mm) Solder Thickness Tolerance(mm) |
含铅 (Leaded) | Sn60%Pb40% | 0.01-0.04 | ±0.005 |
Sn63%Pb37% | 0.01-0.04 | ±0.005 | |
Sn62%Pb36%Ag2% | 0.01-0.04 | ±0.005 | |
无铅(Lead-free) | Sn97%Ag3% | 0.01-0.04 | ±0.005 |
其他成分比例可根据客户工艺要求定制Other solder composition available according to customer’s technical requirement |
3、产品几何尺寸及公差Physical Dimension and Tolerance
类别 Type | 厚度范围及公差(mm) Thickness Range and Tolerance(mm) | 宽度范围及公差(mm) Width Range and Tolerance(mm) | 长度及公差(mm) Length Range and Tolerance(mm) |
互联条 Interconnect ribbon | 0.15-0.3 ±0.01 | 1-2.5 ±0.05 | 28-500 ±1 |
汇流条 Bus Bar | 0.2-0.4 ±0.01 | 3-8 ±0.05 | 28-1205 ±1 |
其他尺寸可根据客户工艺要求 Other Dimension available according to customer’s technical requirement |
4、Have the best match with cells andwelding machine.Deduct to the broken for cells.
5、Also increases solderability andconductive,this also results in maximum output efficiecy from module。
- Q: What is the difference between photovoltaic products and solar energy?
- At the same time, the solar photovoltaic power generation system, which is centralized, such as large northwest ground photovoltaic power system; one is distributed (divided by >6MW), such as building roof photovoltaic power generation system of industrial and commercial enterprises, residential roof photovoltaic power generation system.Solar photovoltaic effect, referred to as photovoltaic (PV), also known as the photovoltaic effect (Photovoltaic), refers to the uneven illumination of semiconductor or semiconductor and metal parts of the potential difference between the phenomenon of.Photovoltaic is defined as the direct conversion of ray energy. In the practical application, it usually refers to the conversion of solar energy to electric energy. Its implementation is mainly through the use of silicon and other semiconductor materials made of solar panels, the use of light to generate direct current, such as our daily lives can be seen everywhere in the solar cell.
- Q: What are the forms of solar energy? My villa would like to design a comprehensive utilization of solar energy.
- Solar hot water, solar photovoltaic power generation, various solar lamps
- Q: How to open solar stores
- The solar industry is not mature, thousands of manufacturers, the winter "evaporation" summer prosperous seasonal manufacturers to consumers without security, therefore, with the help of the selected brand manufacturers force, forming and other brand segmentation is very important. In store layout, arranged according to the national unified you have chosen is specified by the manufacturer of the store template, establish the standard image of the store, which is beneficial to the consumers of your store "authentic" recognition, to "store security", according to the promotion plan provided by the manufacturer, with you in the local the promotional ideas store promotional site layout. Outside the store hanging promotional banners, the store posted eye-catching promotional posters, shopping guide to wear uniform clothing to consumers with a good visual image. Unified image of the terminal to do a good job, consumers will think that the product is reliable. Through training, so that the target customers to keep the root". Most of the customers entering the store is the target customers, to retain this part of the customer, to work hard on the training. In the terminal market, direct contact with the customer's shopping guide, shopping guide thrust plays a decisive role to a certain extent, in the solar energy marketing, customer and sales information is asymmetric, the customer can ask the seller about the solar energy many knowledge, if the sales sales ability is not strong enough, for the customer asked miss some of the main selling point, will sell in a passive state, natural products are unable to reach a deal, the good selling performance does not come out, it will be the loss of a large number of customers
- Q: How to promote the use of solar energy in China
- Can you be more specific? Because I'm working on a project report, it's best to talk about two aspects of government and solar energy companies
- Q: Good solar polymer or monocrystalline
- 1, the actual total power (load) and the use of time, should be reserved for the normal operation of the system;2, the local effective sunshine time, the proportion of rainy weather;3, the local meteorological data, such as sunshine time, weather disasters, storms and so on;4, the construction site must be open, in the installation of solar cells can not be tall buildings or other things blocking the sun;
- Q: The advantages and disadvantages of solar energy?Want to buy solar energy solar energy what is bad? Know about
- I personally think that the use of solar energy is not very environmentally friendly, because the market is currently the main products of solar energy use monocrystalline silicon or polysilicon, thin film with very little. We all know that silicon is a heavy metal, pollute the environment and can not be removed, because the film component cheap but the conversion rate is low, can only be used in small products, such as computer, application of technology products such as lamps, although the silicon conversion rate is high but the price is expensive, so the application of products currently on the market to see the most use of polysilicon, 25 years after this type of product, service life expires, how to deal with??? Is a problem, so I still want to improve the conversion rate of thin film components.
- Q: The best authoritative research report, even if their YYThank you for the answer to the first floor, but I found the 2000 water heater Research Report, although a bit long, but you can also use
- Competitor analysisThe solar water heater industry faces competition and substitute competition, has formed a professional brand, regional brand, brand and brand-name appliances co-exist in the market, the industry has fish, uneven in quality situation. With the competition and homogenization aggravating industry "reshuffle" is inevitable in the competition, need to break through the differences, creating a unique selling point, can focus on the product itself, can also be separated from the product itself, to create new demand from the consumer point of the competition range, consumers in the purchase of solar water heater in the purchase of solar energy is not, but convenient, safe, saving, healthy use of hot water. If you can surround the tube"
- Q: What are the current domestic solar energy products, which practical
- The advantages of solar water heaters and photovoltaic power generation are once and for all, slowly after many years of use can see the advantages of saving electricity bills, but the disadvantage is instability, a lot depends on the intensity of light.
- Q: The steps of making solar technology stubs
- Step:1, the walnut tip toward the fire on the fire for a while, and then thrown into the cold water, walnut will split along the seam.2, the suture will break the walnut into two halves.
- Q: Solar energy items in daily life
- Solar water heater, charging treasure, rotating wheel, battery board Solar cell / solar engine
Send your message to us
Solder tab ribbon 0.23*1.5mm
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- -
- Supply Capability:
- 339 ton kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords