Single Screw Extruder Machine for Blown film
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 10 set/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Single Screw Extruder Machine for Blown film
Description of High Quality Extruder
Single Screw Extruder for PVC/ABS/PCFilm Granulating Lineis mainly used to process PP, PE, PPR,ABS and other plastics. Equipped with auxiliary machines, it can manufacture profile, pipes, sheets and other plastic products and granulation. This Single Screw Extruder has the advantage of simple production technological process, high output, stable quality and low cost.
Advantages of High Quality Extruder
1.Suitable for various polyolefin materials: PVC, PC,and ABS etc. single screw extruder adopts advanced human-machine interface control system to realize the automatic control of the whole line
2.Excellent temperature control system to ensure the stability of the producing process. Integrated design of force water cooling and force feeding groove ensures the evenness and stability of the manufacturing process.
3.High-performance driving system; Wearable and easy to maintain.
Technical Parameters of Sigle Screw Extruder
Model | L/D | Output (kg/h) | Speed of Screw Rotation (r/min) | Power (kw) | Center Height (mm) |
JWS45 | 25/28 | 25/30/38 | 10-100 | 11/15/18.5 | 45 |
JWS65 | 25/28 | 50/60/80 | 10-100 | 18.5/22/30 | 65 |
JWS75 | 25/28 | 80 | 10-100 | 37 | 75 |
JWS80 | 28/30 | 100 | 10-90 | 37 | 80 |
JWS90 | 28/30 | 120 | 10-90 | 45 | 90 |
JWS120 | 28/30 | 250 | 10-90 | 75 | 120 |
- Q: What is the waste gas produced by the extruder, granulator and mixer?
- Plastic is a chemical product, and the waste gas produced by the process is organic waste gas. The commonly used and relatively efficient treatment method is activated carbon adsorption. The specific work process is as follows: exhaust gas, air pipe, dry filter, activated carbon adsorption, fan and discharge
- Q: Basic parameters of extruder screw
- 2. The ratio of the length to diameter of the screw, the length of the screw L/Ds and the ratio of L to the diameter of the screw Ds is called the ratio of length to diameter. When the other conditions are constant (such as the diameter of the screw), increasing the ratio of length to diameter means increasing the length of the screw. The L/Ds value is large and the temperature distribution is reasonable, which is beneficial to the mixing and plasticizing of plastics. At the same time, the heating time of the plastic in the barrel is longer, and the plasticization of the plastic will be sufficient and more uniform. So as to improve the quality of machine plastics. If the plastic quality requirement is constant, the rotation speed of the screw can be increased after the ratio of length to diameter increases, thereby increasing the extrusion amount of the plastic. However, too large length diameter ratio, power consumption will increase the screw, and the screw and barrel of the processing and assembly of chicken more difficult; the possibility of screw bending will increase, will cause the abrasion of the screw and the inner wall of the cylinder, reduce the service life. In addition, the heat sensitive plastic, large diameter and long retention time than thermal decomposition, the plasticizing and impact plastic extrusion quality. Therefore, in the full use of the advantages of increasing the ratio of length to diameter, the selection should be based on the physical properties of the processed plastics and the quality requirements of the products.
- Q: What is an extruder?
- Usually called extruder, it is a plastic extrusion machine.
- Q: What impact does the extruder vacuum pump open or close on the extrusion product?
- If the vacuum pump is opened, the air in the extruded product will be removed and the product material will be more closely packed.
- Q: Why will the extruder frequency shift stop?
- Because the frequency converter is out of order, you can look at the fault record parameters of the inverter.
- Q: What are the two types of extrusion?
- Extrusion? The extruder. The extruder is divided into single screw extruder and twin screw extruder, and the twin screw extruder is divided into two parts: flat, double and cone.
- Q: Why can the plastic extrusion machine extrude the flat bar?
- What's the reason for pulling out the stripes?1, the vacuum is not enough.2, high temperature settings.3, formula lubrication is too much
- Q: Where is the Huangyan extruder machine?
- You want to see what type of mold processing, but Masino comprehensive, injection mold, blow mold, mold and so on can be developed.
- Q: Extrusion machine operating procedures, specific points, thank you!
- 6, the speed from low to high, added to the normal speed, is strictly prohibited high-speed car, observe the instrument on the current value and temperature is normal, in case the current is too large, cause the heater to burn.7, when lifting the disk, we should pay attention to the limit of the rise and fall, not too high or too low, when there is an electrical limit, shall not exceed the limit.8 when feeding to the hopper, be careful not to enter the metal, and do not use a screwdriver or a metal bar to poke the plastic into the screw.9 check the dry test machine, should be equipped with rubber insulation plate, otherwise, no driving.10 before driving, should check whether the ground location is good, grounding resistance should be measured regularly, not higher than 4 Europe; equipment whether there is noise and other anomalies, if there is a problem, repair and reuse.
- Q: Ask everyone about the extrusion machine at the wire factory...... How do you adjust the speed of the motor?
- One is the use of frequency converter connection, in accordance with the frequency converter user manual guidance method to adjust the speed, in addition to the use of electromagnetic speed control motor, through the speed box above potentiometer adjust speed.
Send your message to us
Single Screw Extruder Machine for Blown film
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 set
- Supply Capability:
- 10 set/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
