RP601L/RP701L is a tyre type paver featuring good maneuverability
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
| Items | Unit | Parameters |
|---|---|---|
| Basic paving width | m | 2.5 |
| Max. paving width | m | 6.0/7.0 |
| Max. paving thickness | mm | 300 |
| Paving speed | m/min | 0～18 |
| Travel speed | km/h | 0～18 |
| Theoretical Productivity | t/h | 400 |
| Hopper Capacity | t | 13 |
| Gradeability | % | 20 |
| Pavement evenness | mm/3m | 3 |
| Transverse levelling accuracy | % | ±0.03 |
| Centre crown ratio | % | 0～+3 |
| Engine model | D4114ZG2B | |
| Engine power | kw | 100 |
| Engine speed | r/min | 2400 |
| Fuel tank capacity | L | 170 |
| Machine weight | t | 15.3～19 |
| Dimension | mm | 6096X2580X3832 |
| Auger speed | r/min | 0～82 |
| Conveyor speed | m/min | 0～36 |
| Vibrator speed | r/min | 0~1470 |
| Vibrator amplitude | mm | 4 |
| Screed heating | Electrical heating | |
| Auger and conveyor control | Automatic Control by Ultrasonic Sensors | |
| Automatic levelling control | Simulation control |
| Items | Unit | Parameters |
|---|---|---|
| Screed model | / | 475 |
| Type | / | Gas heating, vibration |
| Extension | / | Hydraulic |
| Width | m | 2.5-6.0/7.0m |
| Vibrator speed | rpm | 0-1470 |
RP601L/RP701L is a tyre type paver featuring good maneuverability, high speed and large traction force. It can meet different paving requirements, and the paving width can be stepless adjusted from 2.5m to 7.0m. It is mainly used for the maintenance of municipal roads, parking lots, highways of high grade and road paving operations. It can be used to pave multiple kinds of materials, especially the asphalt concrete materials, and it can be flexibly used in small, medium or large paving operations. And it also features satisfactory levelness and compactness.
Technical features
Reliable drive technology
Rear 4WD, large ground contact area, higher traction force than single wheel drive, and the tyre slippery is effectively avoided.
Extra high traction force, applicable to various work conditions, including road construction and site transfer at hilly country
Advanced screed technology
Hydraulic stepless extension/withdrawal, applicable to the work condition of widened road.
The 3-point suspension system ensures stable extension/withdrawal of screed and good rigidness of the screed.
With stepless adjustable vibrating rotation speed, it can meet different work requirements.
Performance Advantages
Strong power system
It adopts Shanghai D4114 diesel engine, featuring low temperature start, energy-saving and environmental care.
The large area water radiator and hydraulic oil radiator ensure long time continuous paving operation under 50℃. The hydraulic system is cooled with priority, which ensures high reliability.
Stable hydraulic system and drive system
With parts of overseas brands, and the integrated hydraulic system, it has stable and reliable performance.
It adopts drive axle main drive technology, and there is 2 speed gear transmission mounted on the axle, which is convenient to shift between the paving gear and travel gear. The unique differential lock design avoids slippery.
Accurate control system
It adopts mechanical-electric-hydraulic integrated control technology, featuring high level of automation, control accuracy and reliability.
The left/right feed/material distribution device adopts supersonic level gauge which can achieve automatic even feeding of materials.
The standard configuration includes electronic automatic leveling device which ensures higher evenness of the paving surface.
Advanced feed/ material distribution system
The system adopts integrated drive technology, the feed system and distribution system are independent and they can be controlled separately.
The bottom plate of feeding system adopts extra wear resistant steel plate, and the conveying chain has high strength which ensures long life.
The distribution blades is made of wear resistant alloy, , open type joint, featuring convenient assembly and disassembly and long life.
Efficient electrical heating technology
The efficient electrical heating system is convenient to operate, safe, energy-saving, and environmental friendly, especially applicable to the municipal highways and road maintenance work.
Comfortable control system
All the control devices are installed at the instrument panel, which is convenient to operate.
The control panel can be slide to any position to meet the work condition, in addition to the wide view, it is convenient to opeate.
The whole paving process can be controlled through the central control panel or by auxiliary control from the outer control console at left/right side.
Convenient maintenance
XCMG patented central lubrication system, installed with originally imported lubrication device, which greatly reduces maintenance work and improves productivity.
The hydraulic system is installed with ball valves for the inlet and oil return pipelines, which is convenient for the inspection and repair of the system.
- Q: its the yellow one on the right that criss crosses underneath it
- Can you be a little more specific ? There are two yellow machines on the right. One is a man lift and the other is a mixing hopper of some kind. The green piece of equipment is some kind of auger that looks like it may be for dispensing some kind of material. The white piece of machinery with the bucket loader under the hopper is called a BobCat. Some of these machines do not look familiar as being used here in the US. The photos are showing how the company's drive hubs are being used in different situations. I don't see that they describe the different pieces of equipment. Sorry I couldn't help more.
- Q: What is the pay rate for heavy machinery
- That really depends where you work. Big mines you can be making over $60 per hour. I'd say $18-$25 per hour is more average.
- Q: Well the machinery is hydraulic and so it trips automtically after a certain temperature. It is because of the oil or pressure or what. What should I do in order to let it run for longer time. I mean it runs for few minutes.
- you need to describe your question better. Is the high temp on the hydraulic system or the crusher system? If it is hydraulic, add an oil cooler to the system and depending on the temperature desired it could be an air or water cooler. If it is the crusher, you can lighten the feed rate or open it up a little to let air go through the machine. The other thing look at the set temperature for tripping and make sure the switch is set properly. The other thing is, is the crusher set up right for the material that you are crushing. You may have to adjust the mix of feed or put another crusher in line if you are overloading it. And all crushing is not the same. You can crush aluminum cans by just squeezing them into a block or you can shred them into bits with a shredder/crusher. Not clear what you are doing.
- Q: A 20kw,200V shunt generator is operated at rated load. if the driving engine is developing 30bhp (break horse power), determine the iron and friction losses.Answer is 1039W. Thanks a lot.
- This is the answer I gave another asker of the same question. brake horse power of an engine is the actual amount of horse power an engine can put out. Using 745.5 watts as a horse power, the engine will supply the equivalent of 30 times 745.7 watts at 30 brake horse power. This is 22,371watts. The generator is supplying 20 Kw or 20,000 watts. The difference in the engine output and the generator output is 22,371 minus 20,000 or 2.371 watts. I don't see how the answer is 1039 watts, if my calculations are correct. Perhaps someone else will have the answer you seek. I may be missing something in your question.
- Q: if you are not moving in outer space, is it possible to move without the aid of machinery?
- you could spit. That would move you. You could throw a heavy rock.
- Q: what are deck machinery comprised of, their uses and operation.
- Windless for raising and lowering the anchor,crane for loading and unloading cargo, winches for opening the hatches and hydraulic rams for raising and lowering traffic ramps.
- Q: Location: USA - I get 120v on all 3 legs of 3 phase system but check 208v between any 2 legs. Can I step it up to 240v without a transformer? My machinery specifies 240v
- if your gadget is below 10 HP, it is switched on right away in delta configuration, no could connect the independent, yet while that's previous 10 hp it required to start in celebrity and then to alter to delta after commencing, then ask ability enterprise to connect independent.
- Q: Just thread pipes?Is that all they do because thats what I keep hearing
- The duties performed by MRs include: repairing and operating auxiliary machinery; calculating time and material needed for machine shop work and the repairing of auxiliary machinery; drawing sketches and preparing specifications for replacement parts; working from sketches and specifications to produce replacement parts; operating machine shop equipment, such as lathes, drill presses, shapers, bench grinders, milling machines, boring mills, power hacksaws and computer numerically controlled machinery; working with precision measuring instruments such as micrometers, depth gauges, verniers, calipers, gauge blocks, protractors and dial indicators; engraving metal and other materials; performing electroplating and flame spraying operations.
- Q: out of solid gold? pretend like you have a limitless supply of gold. is gold a useful material more than other metals in machinery? can gold machines last longer? will computer chips or circuits operate with gold instead of other metals? if not gold then what is the best materials?
- You are dreaming ! Not a bit of GOLD existed in commercial computer . Some gold plated parts might be found in old old computer products before 1973. At that time,very expensive IC used gold line welding to make chip connection.
- Q: What is construction machinery?
- Mechanical engineering manufacturing category is very broad, refers to the engineering machinery in construction engineering such as construction machinery, transport machinery, construction machinery and construction machinery parts collectively, is completed by mechanical processing and special processing by various metal materials and nonmetal materials, combine them into tools and can be used. To serve the cause of building. The whole process of making machinery is engineering machinery manufacturing.
Send your message to us
RP601L/RP701L is a tyre type paver featuring good maneuverability
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
