Cryogenic Insulation Paper for LNG Refractory Fiber Paper
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 kg
- Supply Capability:
- 10000000 kg/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
The ordinary cryogenic insulation paper(incompatibility with oxygen):
Ordinary cryogenic insulation paper is made of a special process with high quality chemical fiber, usually compositely used with aluminum foil or single (double)aluminized polyester film. It is used in the storage container of cryogenic liquid(liquid helium, liquid nitrogen and liquid argon) and also used in dry ice storage vessels. Its advantage are lightweight, good uniformity, low thermal conductivity, large thermal contact resistance, low outgassing rate in vacuum. This product can be applied in a wide temperature range:-269°C-190°C.
Specification
| Item | Unit | Index |
| Weight | g/m2 | 10±2.0 |
| Thickness | mm | ≤0.06 |
| Tensile Strength | KN/m | ≥0.06 |
| Moisture | % | ≤12 |
| Thermal Conductivity | w/mk | ≤1.35*10-4 |
General Information of Cryogenic Insulation Paper
Cryogenic insulation paper (P paper/Z paper)/aluminum foil (or aluminized polyester film) compositions are laminated of Cryogenic insulation paper and aluminum foil (or aluminized polyester film). Cryogenic insulation paper can be wrapped to the cryogenic inner tank directly and no need to composite by user. Therefore, cryogenic insulation paper can effectively reduce the waste of material and hugely increases efficiency. The width varies from 40mm to 1800mm.
FAQ
Q1: How do you control the products quality?
A1: With strict quality control system throughout the materials selection and production process, our refractory and ceramic fiber products quality is effectively controlled to meet customer requirements.
From the raw materials selecting, our quality control begin. The quality certificates of raw materials are required and each batch will be tested before using. During production, the quality control is conducted by workers and then each piece will be sorted and examined by quality supervisor.
- Q: I would like to ask how the process of cryogenic treatment
- It's just a rough process of producing oxygen through cryogenic technologyNitrogen can also be re cooled into liquid nitrogen -196 degrees.Liquid nitrogen can be used for some cryogenic treatmentIf the temperature is lower, can use liquid helium.Cryogenic applications
- Q: Can the cryogenic phase control the cooling rate?
- If it is just a simple container or box, it is difficult to control the temperature. The program can control the temperature of cryogenic equipment, can also control the cooling rate
- Q: How many changes in the properties of the cryogenic metal?
- 4 milling cutter milling hole surface Phi 12, 48-2NT5 milling cutter milling end 13, 48-2NT6 high speed steel twist drill drilling A3 of 129 2967 high speed steel twist drill drilling 40Cr of 146 3588 high speed steel 8 drill wear 25cr2NiMoV 10 hole 40 hole wear9 high speed steel 10 bit hour HT20-40 1235
- Q: Cryogenic treatment to improve what performance?
- Cryogenic treatment (cryogenic treatment) refers to the materials needed at -190 DEG C to -230 DEG C under treatment. Suitable for all metal or nonmetal material, such as alloy, carbide, plastic (nylon and Tie Fulong), aluminum, ceramics etc..
- Q: Ultra low pressure casting mold useful, how to arrange the process? Thank you
- While casting field production high temperature is about 660 degrees, some die casting production Aluminum Alloy temperature of 740 degrees, copper alloy die-casting production temperature even up to about one thousand degrees, the temperature and the ambient temperature, the temperature fluctuation is bigger, hot and cold alternating stress caused by the greater! That is, the stress produced in the production process is very large, even if the cryogenic treatment, the stability of the role of the size of the casting mold and plastic mold is not obvious! As for how you choose, you might as well try!
- Q: What is the meaning of vacuum cooling in heat treatment
- Use a low temperature of 100 degrees below zero
- Q: What is a cryogenic fast line
- Equipment is compressor, heat exchanger and expander (or throttle). The compressor and expander generally use a reciprocating or turbine. Commonly used heat exchanger coil type, shell and tube type or plate heat exchanger. Deep freezing technology, can the nature of the study of materials near absolute zero, and can be used for the separation of liquid and gas mixture of gases. Industry can get liquid oxygen, liquid, gas, etc.; Can be effectively separated from the air
- Q: What is the meaning of cryogenic technology in the mechanical process, what is the specific practice?
- High speed steel W18Cr4V cryogenic hardness, impact toughness and wear resistance are significantly improved with the use of its manufacturing tool life increased by 2~5 times
- Q: What is the meaning of deep frozen
- So people use frozen ways to preserve food. Generally in a very short period of time, such as half an hour, so that the need to freeze the food quickly reach the specified ultra-low temperature, such as -30 ~-40 C.
Send your message to us
Cryogenic Insulation Paper for LNG Refractory Fiber Paper
- Ref Price:
-
- Loading Port:
- Qingdao
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 kg
- Supply Capability:
- 10000000 kg/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
