PVC Pressure Pipe grey, white Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1.Specifications
pvc pipe for water drainage
1)Specification of pvc pipe:40mm-400mm
2)Thickness of pvc pipe:1.2mm-7.0mm
3)ISO certified.
2.Properties of pvc pipes:
1) Material: pvc pipe unplasticized polyvinyl chloride
2) Standard: GB, ISO9001, ISO14001
3) Color: white pvc pipe, grey pvc pipe , etc.
4) Specific Gravity, g/cm3, 20(C): 1.35 - 1.55
5) Vicat Softening Temperature, (C) >=79
6) Longitudinal Reversion, %, 150(C) <=5
7) Dichloromethane Resistance Test: No attack
8) Falling Weight Impact Test, TIR, %, 0(C) <=10
9) Tensile Yield Strength, Mpa >=40
10) Fitness of Water Tightness Test: No Leakage
11) Fitness of Air Tightness Test: No Leakage
3.Features of pvc pipes :
1) Light weight, easy to load and unload: PVC pipe is very light, convenient to handle loading unloading, and installing.
2) Good chemicals and drugs resistance: PVC pipe has its excellent resistance to the erosion caused by acids and alkalines, a great help to the chemical industries.
3) Small resistance to fluidity: The smooth surface reduces resistance to the fluids. Its roughness coefficient is only 0.009, much less than other pipes, Under same discharges, smaller cabibre of the pipe can be uesd.
4) Strong mechanical strength: Good resistance to water pressure, outside impact and pressure, is satisfied under any conditions.
5) Good electrical insulation: excellent insulation nature against electricity. the pvc pipe can be served as conduits and pipes in construction cable and wire.
6) Water quality unaffected: The solution tests on the PVC pipe show no affect on water quality when the water flows through is. It is considered the best piping material for running water works.
7) Simple installation: Very easy to connect, thus much time and laborcost may be saved.
4.Application of pvc pipes:
1) Structure Engineering, home water supply and drainage
2) Water drainage/supply system
3) for Agriculture Irrigation, aquaculture
5.Specifications of the pvc pipe:
Outer Diameter (mm) | Wall thickness(mm) | ||||||||
2.5MPA | 2.0MPA | 1.6MPA | 1.25MPA | 1.0MPA | 0.8MPA | 0.63MPA | |||
φ20 | 20*2.3 | 20*2.0 | |||||||
φ25 | 25*2.8 | 25*2.3 | 25*2.0 | ||||||
Φ32 | 32*3.6 | 32*2.9 | 32*2.4 | 32*2.0 | |||||
Φ40 | 40*4.5 | 40*3.7 | 40*3.0 | 40*2.4 | 40*2.0 | ||||
Φ50 | 50*5.6 | 50*4.6 | 50*3.7 | 50*3.0 | 50*2.4 | 50*2.0 | |||
Φ63 | 63*7.1 | 63*5.8 | 63*4.7 | 63*3.8 | 63*3.0 | 63*2.5 | 63*2.0 | ||
Φ75 | 75*8.4 | 75*6.9 | 75*5.6 | 75*4.5 | 75*3.6 | 75*2.9 | 75*2.3 | ||
Φ90 | 90*10.1 | 90*8.2 | 90*6.7 | 90*5.4 | 90*4.3 | 90*3.5 | 90*2.8 | ||
Φ110 | 110*10.0 | 110*8.1 | 110*6.6 | 110*5.3 | 110*4.2 | 110*3.4 | 110*2.7 | ||
Φ125 | 125*11.4 | 125*9.2 | 125*7.4 | 125*6.0 | 125*4.8 | 125*3.9 | 125*3.1 | ||
Φ140 | 140*12.7 | 140*10.3 | 140*8.3 | 140*6.7 | 140*5.4 | 140*4.3 | 140*3.5 | ||
Φ160 | 160*14.6 | 160*11.8 | 160*9.5 | 160*7.7 | 160*6.2 | 160*4.9 | 160*4.0 | ||
Φ180 | 180*16.4 | 180*13.3 | 180*10.7 | 180*8.6 | 180*6.9 | 180*5.5 | 180*4.4 | ||
Φ200 | 200*18.2 | 200*14.7 | 200*11.9 | 200*9.6 | 200*7.7 | 200*6.2 | 200*4.9 | ||
Φ250 | 250*11.9 | 250*9.6 | 250*7.7 | 250*6.2 | |||||
Φ315 | 315*15.0 | 315*12.1 | 315*9.7 | 315*7.7 | |||||
Φ400 | 400*19.6 | 400*15.3 | 400*12.3 | 400*9.8 | |||||
6.FAQ
Q:What is you MOQ?
A:As customer’s request.
Q:What is the production ability? or delivery time?
A:Our production ability support 40HQ order finish in one week.
Q:What is the regular shipping port?
A:Tianjin or Shanghai.
Q:What is your payment?
A:TT or CC.
Q:Can we have sample?
A:Sample free, freight cost you.
Q:For urgently doubts,who online?
A:Sales and marketing Manager 24hours online service.
- Q: What are the production processes and characteristics of high pressure rubber hose?
- Production flow chart of high pressure steel wire braided hose:High voltage wire winding production process: rubber hose, pipe extrusion, boiled casing (core wipe silicone oil), wrapped around the screen (screen on the casing after finishing cutting winding), a layer of glue, the first layer of steel wire winding, two winding layer of glue, second layers of wire, third in the layer of glue, third layers of wire winding layer, fourth layer, fourth layer winding wire, package cover, water roll of cloth, cloth, water solution of vulcanization, mandrel stripping, a hydraulic, appearance and dimension inspection and packaging storage.
- Q: SolidWorks how do you put rubber hose on the iron pipe?
- It is important to note that different materials are assigned to each other: metal and rubber. To produce engineering drawings that guide production, fill in the corresponding section lines on the cutaway surface.
- Q: How can the rubber joint be classified according to the range of temperature?
- Temperature resistance, suitable for operating temperature above 80 degrees in the transmission pipeline. Special rubber flexible joint is suitable for special pipeline system in the environment of oil, ozone, strong acid and alkali.
- Q: Can the natural gas hose not exceed 1.5 meters or 2 meters?
- The gas hose on the principle of not more than 1.2 meters, and regularly check the technical requirements, 1-2 must be replaced if the temporary gas can also be longer, if long-term use, as far as possible the use of metal pipe joint and the gas stove can also use metal hose, high safety factor.
- Q: What advantages does the Parker hose have in comparison with other hydraulic hoses?
- First: from the price point of view. The price of PAKER is the most expensive in the whole industry. High popularity.Second: if in terms of quality. With his quality, Ma has worked hard. Eaton. Love hair. The quality is all rightThird: from the point of view of use, the difference is not obvious. PAKER things match well
- Q: How can the soft joint of the pipe be elongated during use?
- When the old pipe replacement of new products, old pipelines have the original pipeline flexible joint elongated, elongated here not just elongated, but when the pipeline working every day to pull long, long time, deformation is big.
- Q: What is negative pressure rubber shock proof joint? Is vacuum piping available?
- Negative pressure resistant rubber shock joint is simple product requirements than the general negative pressure resistant rubber joint rubber joint is much higher, simply can't stand the pressure, for example the pipe diameter is 0.1kg pressure, rubber tube will suck flat, so with the outward pressure pipeline is completely different, negative pressure, diameter must be increase the pressure guide tube, negative pressure diversion tube also is what we usually say is a carbon steel pipe in the shock absorber rubber hose diameter, but joint diameter than the original diameter, the pressure guide tube, shock absorber rubber hose will not be sucked flat, so that the original vibration isolation and shock proof box the expansion effect is not affected, only the affected joint is slightly smaller diameter.
- Q: How should we distinguish between the silicone hose and the rubber tube?
- Smell, silicone no flavor, rubber flavor, silicone general flexibility better, rubber mechanical better
- Q: What material is used in the gas pipeline to reduce the wastage?
- Galvanized pipe is a pipe in galvanized steel pipe surface, a hot galvanized and galvanized pipe, galvanized pipe while the production cost is low, but easy to corrosion, therefore, is usually used for conveying gas hot galvanized pipe. The galvanized pipe not only has higher corrosion resistance, but also has a long service life, but because of its excessive interface, construction trouble is gradually being eliminated by the market.
- Q: What are the types of metal hose couplings?
- DPJ external threaded end metal hose joint is an extension of JB/GQ 0552, /83, D95-5 metal joint;The metal joint is made of zinc alloy. The surface is zinc plated, frosted or chrome plated. The structure is close, without porosity and high strength. The metal hose is connected reliably and has beautiful appearance;The metal joint is an end connection and a linear connection for connecting the metal hose to the case;Suitable metal hose: JS, JSH, JSB, JSHG;It is recommended to use an inch metal hose joint or a metric thread metal joint;Can be customized a variety of non-standard metal hose joints, special metal joints.
Send your message to us
PVC Pressure Pipe grey, white Made in China
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 mm
- Supply Capability:
- 1000 mm/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
