15mm Plastic Injection End Cap Pipe Fittings for Pipeline System
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PE Injection End Cap Pipe Fittings for Pipeline System
Pressure grade:
PN≤1.6MPa when DN<400MM
PN≤1.0MPa when DN≥400MM
Size: DN25MM-DN630MM
We own three industry bases for manufacturing pipes, fittings and new materials, including the biggest production line of steel wire reinforced PE composite pipe in the world, and top advanced PE pipe production line.
We get long term cooperation with leading material suppliers in the world and professionally provide the pipeline system solutions of matched products and technical cases by the whole industry chain from materials R&D to pipeline engineering installation.
- Q:Can plastic pipe fittings be used in oil and gas applications?
- Yes, plastic pipe fittings can be used in oil and gas applications. Plastic materials like polyethylene and polypropylene are commonly used in these industries due to their corrosion resistance, durability, and cost-effectiveness. Plastic pipe fittings can effectively handle the pressure and temperature requirements of oil and gas systems while providing reliable performance and longevity. However, it is important to choose fittings that are specifically designed and certified for oil and gas applications to ensure safety and compliance with industry standards and regulations.
- Q:How do you repair plastic pipe fittings?
- To repair plastic pipe fittings, you can generally follow these steps: 1. First, turn off the water supply to the affected area. 2. Clean the damaged area thoroughly to remove any dirt or debris. 3. Identify the type of plastic used in the pipe fitting as different plastics require different repair methods. 4. For smaller cracks or leaks, you can use a suitable adhesive or epoxy designed for plastic repairs. Apply the adhesive on the damaged area, ensuring a tight seal. 5. If the damage is more severe, you may need to replace the entire fitting. In this case, carefully cut out the damaged section using a hacksaw or pipe cutter, and then install a new fitting using appropriate connectors or couplings. 6. After completing the repair, turn the water supply back on and check for any leaks.
- Q:Do plastic pipe fittings have a maximum operating temperature?
- Yes, plastic pipe fittings have a maximum operating temperature. The maximum temperature varies depending on the type of plastic used in the fittings. It is important to consult the manufacturer's specifications to ensure that the fittings are compatible with the intended temperature range.
- Q:Are plastic pipe fittings resistant to scaling?
- Yes, plastic pipe fittings are generally resistant to scaling.
- Q:Antistatic flame retardant PE plastic pipe installation, what should pay attention to?
- 1 、 cut the pipe according to the required length, remove the burr of the pipe port and chamfer 30 degrees.2. Insert the pipe into the bottom of the pipe mouth and mark it at the interface of the pipe and the pipe. Then mark the tube out of the 10mm with this mark. Make second more marks. Clean the outer side of the pipe and the inner side of the pipe. Apply a lubricant (not oil or grease).
- Q:Can plastic pipe fittings be used for food processing facilities?
- Yes, plastic pipe fittings can be used for food processing facilities, but it is important to ensure that the fittings are made from food-grade materials that comply with all relevant regulations and standards.
- Q:Are plastic pipe fittings UV resistant?
- Yes, plastic pipe fittings can be UV resistant. Many manufacturers produce UV-resistant plastic pipe fittings that are specifically designed to withstand the damaging effects of ultraviolet (UV) radiation from the sun. These fittings are made from materials that have been formulated to prevent degradation or discoloration when exposed to UV rays, making them suitable for outdoor applications.
- Q:Can plastic pipe fittings be used for mining operations?
- Yes, plastic pipe fittings can be used for mining operations. Plastic fittings are often preferred in mining operations due to their corrosion resistance, lightweight nature, and ease of installation. They can effectively handle various mining applications such as transporting water, slurries, and chemicals. Additionally, plastic fittings are cost-effective and durable, making them a suitable choice for mining operations.
- Q:Can plastic pipe fittings be used for underground drainage systems?
- Yes, plastic pipe fittings can be used for underground drainage systems. They are commonly used due to their durability, resistance to corrosion, and ease of installation. However, it is important to select fittings that are specifically designed for underground use, as they need to withstand the pressure and environmental conditions associated with burial.
- Q:How to calculate joint parts for hot melt connection of water supply plastic pipe?
- If flanges, flanges, or hot melt inserts or electrofusion connections are used, the fittings shall be determined according to the design drawings and field conditions.
1. Manufacturer Overview |
|
---|---|
Location | |
Year Established | |
Annual Output Value | |
Main Markets | |
Company Certifications |
2. Manufacturer Certificates |
|
---|---|
a) Certification Name | |
Range | |
Reference | |
Validity Period |
3. Manufacturer Capability |
|
---|---|
a)Trade Capacity | |
Nearest Port | |
Export Percentage | |
No.of Employees in Trade Department | |
Language Spoken: | |
b)Factory Information | |
Factory Size: | |
No. of Production Lines | |
Contract Manufacturing | |
Product Price Range |
Send your message to us
15mm Plastic Injection End Cap Pipe Fittings for Pipeline System
- Loading Port:
- China main port
- Payment Terms:
- TT or LC
- Min Order Qty:
- 100 m
- Supply Capability:
- 10000 m/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords