NUT coke of 5-15mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Metallurgical Coke of NUT coke of 5-15mm Description：
Lianyungang port is located in the southwest coast of haizhou bay, central China's coastal, for through east to west of China traffic artery jujube longhai, an railway port of destination.Lianyungang coal wharf loading capacity of up to 12 million tons, the discharge capacity and single loading capacity of 3000 tons/hour.
On China's coke production distribution, the regional distribution imbalance of coking enterprises, mainly distributed in north China, east China and northeast China.
2. Main Features of the Metallurgical Coke of NUT coke of 5-15mm：
• Quality assurance
• Mutual benefit
• Preferential price
• Various choice
3. Metallurgical Coke of NUT coke of 5-15mm Images:
4. Metallurgical Coke of NUT coke of 5-15mm Specification:
Parameters | Guarantee | Rejection |
Total Moisture ( As received basis ) | 8% max | |
Ash ( dry basis ) | 12.5% max | > 13.5% |
Volatile Matter ( dry basis ) | 1.5% max | > 1.8% |
Sulphur ( dry basis ) | 0.70% max | > 0.80% |
Phosphorus ( dry basis ) | 0.035% max | > 0.045% |
Size 10-30 mm | 90% min | |
+30 mm | 5% max | > 8% |
-10 mm | 5% max | >8% |
5. FAQ
Coke futures varieties listed is for domestic coke production enterprises, and conducive to the healthy and stable operation of the domestic coking industry.
- Q: What is the concept, relationship and difference between coke and coke? The main difference and contact, thank you
- Formed coke is a product obtained through several steps:(1) environmental protection continuous high efficiency carbonization furnace(2) the use of anthracite powder to produce plastic molding coke and supporting technology(3) a new type of environmentally friendly carbonization carbonization furnace without three wastes discharge.(4) hydraulic press
- Q: Coke belongs to the coal industry
- 11 other mining industry 28 chemical fiber manufacturing 58 warehousing industryC manufacturing 29 rubber products 59 postal industry13 agricultural and sideline products processing industry 30 plastic products G information transmission, computer services and software industry31 grain grinding of non metallic products 60 telecommunications and other information transmission services 13101320 feed 311 cement, lime and gypsum manufacturing 601 Telecommunications133 vegetable oil 312 cement and gypsum products manufacturing 6020 Internet information1340 sugar 313 brick, stone and other building materials 603 broadcast television transmission135 slaughter and meat 314 glass and glass products 604 satellite transmission136 aquatic products 315 ceramic products 61 computer services
- Q: How to distinguish the level of coke. What is metallurgical coke
- Coke type: coke is usually divided by use of metallurgical coke (including blast furnace coke, coke and iron alloy coke etc.), coke and calcium carbide with coke gasification
- Q: How much coke can a ton of coal
- The ratio is about 1 to 0.7, that is to say, 1 kilograms of about 0.7 kg coke coking coal coke, coke did not reach 0.75 kg, 0.71.Don't listen to them char 1.4:1, personal feeling.
- Q: Purpose of using coke in iron making raw materials
- Purpose as follows:1. Provide the heat required for the reaction2, do reducing agent, generate CO, at the same time itself can also restore the iron
- Q: What is the difference between coke and semi coke in ferrosilicon smelting process? In the process of energy statistics in the end should be 0.9714 of the conversion coefficient should be used with the conversion coefficient of 0.75 x 0.9714, please expert advice? emergencyUrgent!
- The difference between them is that the final temperature of the two, the use of different raw materials, product yield and product properties are not the same. Low temperature coke. Under the condition that the coal is isolated from the air, the product is heated to 500 to 600 DEG C to obtain the product. It uses the raw coal is lignite, metamorphic degree of coal, long flame coal and gas coal. The final purpose of the low temperature carbonization is to obtain high yield coal tar
- Q: Coke in the whole process of steelmaking in the end is what to do, just to provide heat or carbon and other substances into steel or iron?In the study of coal classification inside, one is divided into coking coal, coking coal and coke as main, and then you see is steel or iron coke must material. What is not clear. In the end, out of coal mining is mainly used to burn energy extraction, or said that coal like oil can be converted into other products, which is a coke can convert?
- It is necessary to add coke, pellet, sinter ore, ore and other materials into the blast furnace in a certain proportion, batch and sequence, and then to produce molten iron in the reducing atmosphere of the blast furnaceAfter the hot metal to steel in converter against the general converter, scrap also need to add a certain amount of used to balance the heat. Hot metal and scrap are added to the converter after the oxygen lance for oxygen operation, the oxidation of oxygen to carbon in liquid iron, silicon, manganese, phosphorus, sulfur and some non-metallic inclusions to form steel. Adding lime, dolomite, iron oxide and mine slag and coolant is needed in oxygen at the same time. After the completion of steel smelting in the tapping process according to different requirements with the corresponding iron alloy steel, after also refining process.
- Q: What does the M40% and M25% mean in the analysis of coke?
- (2) mainly used in: Coal Science and Technology (first level), coal processing and utilization (level two), coal chemistry and coal quality analysis (level three)
- Q: The two day of the fire is not wang you have a good way to have any good way. Such online
- Under the condition of isolated air, the bituminous coal is heated to 950-1050 DEG C, and finally, the coke is made by drying, pyrolysis, melting, bonding, solidification and shrinkage.
- Q: How much coke is needed for a ton of iron
- 1 tons of iron: iron ore + + coke 340kg + pulverized coal injection 130kg,The process of extracting iron from iron containing minerals, mainly iron oxides, is mainly composed of blast furnace, direct reduction, smelting reduction and plasma method. From the perspective of ironmaking is metallurgy, iron rust, inverse behavior gradually mineralized, simple, pure iron reduction from iron compounds. Pure iron is not common in actual production. More iron carbon alloy.
Send your message to us
NUT coke of 5-15mm
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1000 m.t.
- Supply Capability:
- 100000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
