Mineral Fiber Ceiling Panel MP03 Mineral Fiber Ceiling Panel MP03
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
Plasterboard is made of high-grade environmental protective gypsum raw material, no harming to human body, and it has some performances: (such as environmental protection, fire-proof, moisture-proof, light and high intensity).
Plasterboard is easy to install, and its decoration effect is good. Its special indoor temperature adjustment function can provide a comfortable living environment. It is the first choice to interior decoration.
Plasterboard is made of high-grade environmental protective gypsum raw material, no harming to human body, and it has some performances: (such as environmental protection, fire-proof, moisture-proof, light and high intensity).
Product Applications:
+ Furred ceiling
+ Interior wall cover
+ Partition wall
1.Thermal insulation
2.Fire-resistant performance for fire-proof plasterboard
3.Water-resistant performance for water-proof plasterboard
4.Easy installation (it can be easily sawed,planed,holed and sticked)
5.Special respiratory function (it has a great mass of ting holes
Product Advantages:
1.Thermal insulation
2.Fire-resistant performance for fire-proof plasterboard
3.Water-resistant performance for water-proof plasterboard
4.Easy installation (it can be easily sawed,planed,holed and sticked)
5.Special respiratory function (it has a great mass of ting holes and its function of moisture-adsorbing and moisture-dismissing)
Main Product Features:
Material: Gypsum Board, non asbestos, sulfate free
Surface: High quality PVC/Vinyl
Backside: High quality aluminized PET foil
Edges: Square
Weight /cbm: 780kgs/m3
Tolerance: Length: ± 1.0mm, Width: ± 1.0mm,
Thickness: ± 0.5mm
NRC: 0.1 - 0.3
Light reflection: 0.75
Standards: Gypsum boards are manufactured according to EN-520, ASTM C1396, E84 and E96
Humidity resistance: up to 95% relative
Product Specifications:
FAQ:
1. What kind of certificate do you have?
ISO9001, ISO14001, CE, SONCAP, VOI(CO), CARB, FSC, CE
2. What color can you produce?
You can choose the design you want
3. How about the delivery time?
20-25 days after receiving prepayment or L/C
For the samples, it will be prepared ASAP.
4. What's the MOQ and Payment Terms?
Minimum Ordering Quantity: 2X20ft Container
Payment Terms: T/T or L/C at sight
Images:
- Q: How can the acrylic decorative plate be folded into ninety degrees
- With a resistance wire to heat a straight line for about 3 minutes, and then along the line fold on the line
- Q: There was a giant fly in my basement, so I used the Raid Wasp and Hornet spray to kill it. I shook the can very well, but the Raid still sprayed in a thick stream. The Raid got all over my ceiling, almost in a spiral fashion. It also got on my wall. How can I get rid of it WITHOUT using paint and/or things that I would have to go buy. Water on a paper towel sort of worked, but not that much. Will this cause permanent damage?PETS: For those pet lovers out there, I made sure both of my cats are upstairs and not near the Raid or where it was sprayed. Also, a little bit got on my microfiber couch. Can I fix that?Any suggestions would be very helpful. Thanks so much!
- The major ingredient in Raid after the toxins is a very light mineral oil - Stoddard Solvent, to be precise, exactly the same material as WD-40. The other ingredients are either volatile propellants or tiny fractions by weight. You may remove it with any mild detergent - dish soap in warm water for your walls and a micro-fiber compatible upholstery cleaner for your couch. Any residual materials will eventually evaporate but that may take several days. Further, the mineral oil will attract dust and act as a solvent for it with the potential for permanent staining if you do not deal with it immediately. I strongly suggest that you invest in a kit proper to the material on your couch. On the tag it will be marked with W, S, or W/S which tell you whether compatible cleaners are water or solvent based or either. You will be able to use it more than once. Next time use a fly-swatter or a plant mister. Both work just fine.
- Q: Stainless steel decorative plate where there are?
- Stainless steel decorative panels on the market for elevator decoration, interior design many aspects, the most important quality, you can look at the "high than the elevator".
- Q: OKorder polyester fiber board OKorder sound-absorbing decorative board where the sound-absorbing panels in OKorder
- Copy on the polyester fiber sound absorption board.
- Q: Car a column decorative plate how to dismantle
- No need to remove, the edge of a little hard to break apart, can put the line into it.
- Q: How is the interior trim of the car door?
- Tools: flat screwdriver, 8 socket wrench step: 1, with a flat screwdriver down to pry open the door handle lower trim, from the middle down and then pull out (the back door is the pry half of the front) 2, remove the handle under the veneer can be seen after the internal two black eight hex bolts, with a socket wrench down 3, unplug the window lift switch plug (which has a clip, use your fingers from the back hook to pull out) 4, with a flat screwdriver from front to back pry open the door handle trim panels, remove the door when the handle 5, hand the door trim below the mouth a little open a gap, and then put a wrench into the pry, that the interior board is a plastic card with a plastic card buckle on the door, the pry when the time to use a little effort, One by one pry. If you want to wrench the plastic interior trim bad, you can use a little steel bars and the like, but not too thick, or can not reach into. 6, a lap card bamboo shoots all pry open, hold the door trim board can be removed from the bottom up
- Q: What is the best decorative works?
- Decorative panel style is not good or bad points, mainly their favorite wood pattern, points is good or bad depends on the quality of the floor and the texture and thickness of the skin, you can distinguish in two ways. 1: skin texture smooth, natural, in their own purchase number of decorative panels within the basic texture uniform, uniform color, hand-decorated panel surface can be flat. 2: the thickness of the decorative panel 3mm and 4mm, 3mm thickness of the decorative panel skin thickness is generally 30 silk (0.3mm), after grinding the finished product only 10-20 wire. 40mm thickness of the decorative panel skin thickness is generally 60 silk (0.6mm), after grinding the finished product there are 35-45 silk or so, from the senses certainly better than 30mm thickness of the decorative panels better, of course, there are businesses to 40mm thickness Of the decorative panels with thin skin to paste, this will own more to see a few, more to judge the comparison.
- Q: Clean the operating room floor and wall requirements which
- Operating room decoration requirements of the wall Hospital operating room wall should use light search steel keel partition, to facilitate a variety of pipeline and wall fixed equipment concealed. Surface layer should be used with high hardness, good integrity, sewing less, tightly sealed decorative materials. Can be used 1150 color steel plate, combined with the outlet, return air, observation window, embedded view film lights, equipment cabinets, disinfection cabinet, switch interface, the wall into a whole, to minimize the convex surface and cracks. The wall can be tilted 3 degrees, not only can reduce the dust, and can reflect the angle of light is conducive to health care personnel operation. Can choose the Austrian-made WAX anti-special plate - to strengthen the board. Aseptic wall can be used 600 × 600mm light green tiles a pass to the top. Skirting board should be concave into the wall 1cm, and with the ground into one, corner radius of 40mm rounded corners. Channel on both sides and corner of the wall should be set up two anti-collision board.
- Q: How to remove the roof of ordinary decorative panels
- Kitchen ceiling removal Note: From the above description, it seems that the removal of the original ceiling in the kitchen is quite simple, but if you do not notice some details in the demolition process, it may damage the keel or other, which naturally will affect its second decoration, kitchen What do you need to pay attention to during the ceiling removal process? Take a look at how the nine home network is described for you! 1, the ceiling in the demolition need to take into account the original ceiling of the equipment and facilities within the safety level, need to avoid the demolition of the work of other kitchen to the normal use of the kitchen. In principle, the need to avoid damage to the ventilation and exhaust flue, and the original internal wires and water pipes are needed to avoid. 2, in the kitchen ceiling demolition need to know that the decoration of the ceiling must be consistent with the overall style of the kitchen, so that it can achieve a beautiful effect. 3, in the kitchen ceiling demolition should take into account the safety of its roof, especially in the use of more than 20 years when the kitchen demolition of the ceiling, because of its original building structure has begun to aging, coupled with the original ceiling decoration Decoration requires a large number of holes, so that the local load-bearing capacity decline.
- Q: Will "plastic decorative panels" can paint to change color?
- Can change color, the general car surrounded by itself is plastic.
Send your message to us
Mineral Fiber Ceiling Panel MP03 Mineral Fiber Ceiling Panel MP03
- Ref Price:
-
- Loading Port:
- Shanghai
- Payment Terms:
- TT or LC
- Min Order Qty:
- 3000 m²
- Supply Capability:
- 10000 m²/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords
