Metallurgical Coke of Coke Strength after Reactivity 62
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
1. Structure of Metallurgical Coke of Coke Strength after Reactivity 62 Description：
Coke is made by high temperature metallurgical coke for blast furnace smelting, casting and gasification. Occurring in the process of coking after recovery and purification of coke oven gas is a high calorific value of fuel, is an important industrial raw material in organic synthesis.
Our country's metallurgical industry has a long history, is the original fuel charcoal smelting industry, due to the charcoal burning temperature is lower, and short duration of fire and not easy to master hour, therefore, directly affect the level of smelting, to make the steel quality is not guaranteed. Later, people use coal as smelting, coal combustion temperature is higher, and the combustion duration is longer than charcoal, but easily broken after coal is heated in the oven, affect the burden of permeability, and high content of sulfur in coal, directly affect the quality of the cast iron. After a period of practice, it has been found that the coal after dry distillation (i.e., separated flame heating), volatile components may be removed, and the porosity increased, resembling charcoal, fire is better than that of coal, but also can avoid charcoal and coal. This after carbonization of coal is coke.
2. Main Features of the Metallurgical Coke of Coke Strength after Reactivity 62：
• Mutual benefit
• Preferential price
• Various choice
3. Metallurgical Coke of Coke Strength after Reactivity 62 Images:
4. Metallurgical Coke of Coke Strength after Reactivity 62 Specification:
Parameters | Guarantee | Rejection |
Total Moisture ( As received basis ) | 5% max | |
Ash ( dry basis ) | 12.5% max | > 13.5% |
Volatile Matter (dry basis ) | 1.5% max | > 1.8% |
Sulphur ( dry basis ) | 0.65% max | > 0.75% |
Phosphorus ( dry basis ) | 0.035% max | > 0.045% |
M10 | 8% max | > 10% |
M40 | 82% min | ＜80% |
CSR | 62% min | ＜60% |
CRI | 28% max | > 30% |
Size 30-80 mm | 90% min | |
+80 mm | 5% max | > 8% |
-30mm | 5% max | >8% |
5. FAQ
We have organized several common questions for our clients，may help you sincerely：
1) How to guarantee the quality of the products？
We have established the international advanced quality management system，every link from raw material to final product we have strict quality test；We resolutely put an end to unqualified products flowing into the market. At the same time, we will provide necessary follow-up service assurance.
2) How about your company？
Our company began to export coke when China cancelled 40% of coke export tariffs and quotas on January 1, 2013. We export many kinds of coke, such as CSR60 % and CSR 62% metallurgical coke (met coke), the NUT coke of 20 to 50 mm, coke breeze of 3 to 6 mm, and so on.
3）Main type
Metallurgical coke is blast furnace coke, coke, iron alloy and nonferrous metal smelting with coke. As more than 90% of the metallurgical coke for blast furnace ironmaking, so often called the blast furnace coke metallurgical coke.
Foundry coke is dedicated to cupola molten iron. Coke is the main fuel of cupola molten iron. Its role is hot metal melting furnace charge and overheating, support stock column maintain its good air permeability. As a result, coke blocks should have large, low reactivity, low porosity, with sufficient impact crushing strength, ash content and low sulfur content.
- Q: What is the density of coke?
- The true density of coke: 1.8 ~ 1.95kg/cm3; apparent density: 0.8 ~ 1.08kg/cm3; pile density: 400 ~ 500kg/cm3
- Q: Coke is how to make it? What is the use?
- The production process has the following procedures:The preparation of coking coal is called coal preparation, which is prepared from various kinds of cleaned coal (or raw coal with low ash content), which is made up of coal, which has the advantages of high accuracy, good particle size, uniform quality and meeting the requirements of coking. Generally include: coal unloading, storage and mixing, mixing, crushing and mixing, and the preparation of coal to coke oven coal storage tower. In cold regions, there should be thawing and freezing equipment. To improve the quality of coke, we must pay enough attention to coal preparation. The coal blending is good, the accuracy of coal blending is improved, the fluctuation of coal quality is minimal, and the chemical composition and the physical mechanical property of the coke are ensured to stabilize the coke quality. Therefore, the coal blending equipment must be accurately according to the given value of coal blending; coal blending tank to be uniform continuous coal. In addition to the impurities in the coal, water can not be too high. The reasonable crushing of coal can effectively improve the mechanical strength of coke. According to the specific situation, the most suitable grinding particle size should be determined.
- Q: Ca3 (PO4) 2, SiO2, coke and other raw materials for the production of silica gel (SiO2? NH2O), phosphorus, phosphoric acid and CH3OH, the following process raw materials comprehensive utilizationCa3 (PO4) 2, SiO2, coke and other raw materials for the production of silica gel (SiO2? NH2O (P), phosphorus, phosphoric acid and CH3OH, the following process raw materials comprehensive utilization rate is high, less waste(1) in the reaction, which belongs to the replacement reaction is ______[optional: (I), (II) and (III), (IV), (V).(2) chemical reaction equation II under high temperature of ______; solid waste can be used for ______. CaSiO3(3) reaction to be carried out in isolation and oxygen under anhydrous conditions, the reason is ______.(4) CH3OH can be used as a fuel cell fuel in strong acid medium, the electrode reaction type anode for ______.(5) pointed out that the significance of ______. (VI) in this part of the industrial production(6) written by P H3PO4, the reaction of the ______ ______.
- The answer is: Ca3 (PO4) 2+5C+3SiO2High temperature.?3CaSiO3+2P+5CO =; production of cement, brick or building materials such as;(3) R Si, Si and HCl reaction is the reaction of SiHCl3 with hydrogen, by the reaction of the hydrolysis of SiHCl3, IV, and the generation of hydrogen and oxygen in a certain range will explode, so it must be in contact with oxygen and anhydrous conditions,Therefore, the answer is: SiHCl3 hydrolysis, while the production of H2, mixed with O2 explosion, etc.;(4) methanol oxidation reaction, under acidic conditions, methanol in the cathode of carbon dioxide and hydrogen ions, CH3OH+H2O-6e-=CO2+6H+,The answer is: CH3OH+H2O-6e-=CO2+6H+;(5) the significance of this link in industrial production: recycling of raw materials, energy saving and emission reduction,The answer is: recycling of raw materials, energy-saving emission reduction;(6) from P to H3PO4, the phosphorus and oxygen into water and phosphorus pentoxide, compound phosphate, the equation is P+O2=P2O5, P2O5+3H2O=2H3PO4,The answer is: P+O2=P2O5; P2O5+3H2O=2H3PO4
- Q: What are the indicators of first grade coke and the two grade coke?
- Two level 12.01-13.50 0.61-0.80 not less than 76 not greater than 9 not greater than 1.9Three level 13.51-15.00 0.81-1.00 not less than 72 not greater than 10 not greater than 1.9
- Q: The total amount of heat released by the fully burnt 200g coke is 60% by mass of 10kg water absorption [q coke =3.0 * 107J/kg, C water =4.2 * 103J/ (kg = C)], q:(1) how much heat is absorbed by water?(2) if the initial temperature of water is 10 degrees C, then, after absorbing heat, the temperature will rise to how much?
- At a standard atmospheric pressure, the boiling point is 100 DEG C, the temperature of the water rises to a temperature of 100 DEG C, and the temperature will not change,So the water temperature can be increased to 100;Answer: (1) the heat absorbed by water is 3.6 * 106J;(2) after absorbing heat, the temperature of the water will rise to about 100 degrees centigrade
- Q: What are the main uses of coke
- A small smelting industry, used to produce calcium carbide, carbon disulfide, phosphorus etc.. In the iron and steel enterprises, coke powder is also used as sintering fuel. Coke can also be used as raw material for the preparation of raw materials for the synthesis of water gas. ??4, in order to make the blast furnace operation to achieve better technical and economic indicators, smelting coke (metallurgical coke) must have the appropriate chemical and physical properties, including the smelting process of thermal properties.
- Q: What is the difference between coking plant and coke plant
- Never heard of coke plant, coking plant is the production of coke products, there are other chemical products, it is estimated that you said the coke plant is the purchase of other people's desire to sell second-hand coke traders.
- Q: The cost of iron ore and coke
- Per ton of iron ore 490 yuan / ton, the use of steel per ton coke of 500 kg, coke per ton of 1250 yuan / ton. You can calculate the proportion of these data
- Q: What does the M40% and M25% mean in the analysis of coke?
- (1) crushing strength (shatter strength): the ability of a certain particle size coal sample to fall under the condition of free fall.
- Q: The two day of the fire is not wang you have a good way to have any good way. Such online
- Coke obtained from high temperature coking for blast furnace smelting, casting and gasification. Coke oven gas produced in the process of coking and recovery is not only a high calorific value of fuel, but also an important industrial raw material for organic synthesis.
Send your message to us
Metallurgical Coke of Coke Strength after Reactivity 62
- Ref Price:
-
- Loading Port:
- Tianjin
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 100 m.t.
- Supply Capability:
- 3000 m.t./month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
