Manual(power)-Clamp CH01 - special designed for stacker
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
You Might Also Like
PRODUCT NAME:Manual(power)-Clamp CH01 | |
PRODUCT INTRO | |
The attachment is special designed for stacker,saving the cost for purchasing forklift truck to match the attachment. It can be ordered according to your requipments.
| |
Stackers and reclaimers were originally manually controlled, with no means of remote control. Modern machines are typically semi-automatic or fully automated, with parameters remotely set. The control system used is typically a programmable logic controller, with a human-machine interface for display, connected to a central control system.
Other than stacking, a stacker has three basic movements:
Luffing: This is vertical movement. Stackers use either a winch mechanism with metal wire, or hydraulic cylinders, generally two. Winch mechanisms are highly reliable compared to hydraulic actuators and remain widely used, particularly in large stackers.
Travelling: The stacker moves on a rail track, which may be broad or narrow gauge, enabling it to move around the stockyard as required. For this purpose, traction motors powered by direct current (DC) are connected by bevel gears to between 12 and 22 wheels. For manual control, all the controls are in a controller's cabin above the boom conveyor or boom. Modern stackers can be controlled remotely.
Slewing: This is rotation of the stacker around its central axis to align or place the stockpile where required. This works mostly by a slew pinion that rotates around a slew base. This type of gear assembly is called a sun and planet gear. The axles may be multiple and are driven by DC-powered axle motors which transmit the torque via bevel or helical gears.
The conveyor belts used in stackers may be made of fabric or metal wire, depending upon the material to be handled. They are driven by pulleys, which in turn are driven by DC motors. The motors and gear are coupled by fluid coupling.
Most stackers are electrically powered by way of a trailing cable. There are basically two types of cable trailing: power cord rotating drum (PCRD) and control cable rotating drum (CCRD). Pendulum adjustments are made to ensure the proper alignment of these cables while the stacker is travelling.
- Q: What is the phenomenon of the worker's transport of wood using a lift
- It's normal. This series of products for indoor type, widely used in star-rated hotels, such as the large supermarket industry lobbies, the aerial work inside the factory, has a balance, convenient operation, can enter the hall, can freely in and out of the elevator and less consumption, no pollution, work does not hurt the earth, can be used for wall and out work, work no dead Angle. The single column aluminum alloy electric elevator is fitted with the gantry cross attachment, which is suitable for the maintenance of movie theater, synagogue and church. The long door is easy to assemble, easy to operate, flexible to move, can span up to 1.1m fixed seat and other obstacles, and can stabilize the work on the step. High strength rectangular steel pipe making, rigid and stable. It is equipped with multi-wheel and flexible. Both ends can be adjusted, which can be used to cross different obstacles. The two sides are vertical adjustable, which can be used for the incline or step of a certain incline
- Q: There are several reasons for the hydraulic cylinder oil leak on the elevator
- Oil cylinder in and out tubing joint cracking; (I've seen a lot of this in practice.) 2) the sealing damage of the piston rod with the piston rod is caused by the pull of the piston cylinder. 3) cooperate with cylinder liner piston rod out end seal is damaged, this is caused by long-term use of seal aging more, also has a lot of end cover on is too hard to seal extrusion is damaged, there is a lot of domestic manufacturer of hydraulic cylinder design is not reasonable cause (mostly in order to save costs)
- Q: Tomb raider 9 research base elevator to go to go to go to go to the order to pry the gear not to go down to go down to go down the card 3 to break up
- When I play this card for a long time, also I am getting rid of the four is only the past, the front three gear easy to find, the fourth in 3, 4 layer between the right of the lift, there is a hole, was blocked by a few boards, you can go out from there the fourth also make it
- Q: How does the platform maintain
- Remove and disassemble the valve, and remove the valve core and remove it from the new installation. Put all the hydraulic oil in the tank into the tank, remove the oil absorbent filter, and put it back in the tank. The oil tank refilled with new oil.
- Q: What is the size of the hydraulic elevator platform for 2T
- If use the size of the demand is larger, can use fixed double span hydraulic lift, double straddle steady lifting, large carrying capacity, easy operation, widely used in vehicle maintenance, kilns, chemical plant, equipment and other industries use.
- Q: The hydraulic platform can't rise. Why?
- You can see here. Understand how the hydraulic platform works. A lot of things will be clear
- Q: How do you remove the horizontal universal elevator milling cutter
- Remove the milling cutter in a horizontal milling machine, and if you hammer it with a hammer, it is easy to break the knife and not be allowed to operate. The correct way to do this is to use both hands to pull the milling cutter out of the shaft, and when it's too tight, you can use a hammer to gently tap around the milling cutter.
- Q: Operation and attention of electric elevating platform car?
- Non-professional personnel shall not adjust the overflow valve, the hydraulic system of each component is within the prescribed work under pressure, adjust the overflow valve, may lead to abnormal operation of hydraulic system. There are unnecessary injuries to people, machines and objects; Before any part of the hydraulic system, the pressure oil should be discharged before the pressure oil gusts out. E, the corresponding moving parts shall add some lubricating oil to extend the life of the bearing. F, check the oil and oil position of hydraulic oil. The platform rises all the way. In this position, the hydraulic oil should be 40-50mm above the bottom of the box. If the hydraulic press is dark, sticky or gravel, it is found that 120 # hydraulic oil should be replaced in time.
- Q: What standard elevator platform needs to go to the special equipment inspection to report
- Hello, it should be the elevator that is rated above or equal to 0.5 t, which belongs to the special equipment management scope. Let's take a look at this rule. Special equipment safety inspection regulations
- Q: How to maintain the platform?
- The platform comes in many forms: a, hydraulic. B, mechanical, etc. Hydraulic platform maintenance essentials: 1, to minimize the use of the rustbelt for safety and safety. 2, the joints should be lubricated regularly and lubricate. Regularly check for corrosion or damage to the top of the high pressure tubing and tubing. 4, the limit switch is maintained in good condition, not water or moisture. Always check the oil pump pressure and the oil gauge line. 6, check regularly for oil spills. 7, daily clean maintenance work.
Send your message to us
Manual(power)-Clamp CH01 - special designed for stacker
- Loading Port:
- Shanghai
- Payment Terms:
- TT OR LC
- Min Order Qty:
- 1 unit
- Supply Capability:
- 1 unit/month
OKorder Service Pledge
OKorder Financial Service
Similar products
Hot products
Hot Searches
Related keywords